Bharat Coking Coal Limited Tender

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

ProvidingandfixingfactorymadeuPVCdoor framemadeofuPVCextrudedsections havinganoveralldimensionasbelow(tolerance±1mm), withwall thickness2.0mm(± 0.2mm),cornersof thedoor frametobeJointedwithgalvanizedbracketsandstainless steel screws, jointsmitred andPlasticwelded. The hinge side vertical of the frames reinforcedbygalvanizedM.S. tubeof size19X19mmand1mm(±0.1mm)wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 42x50 m

24mmthickfactorymadePVCdoorshuttersmadeofstylesandrailsofauPVChollow sectionofsize59x24mmandwallthickness2mm(±0.2mm)withinbuiltedgingonboth sides.Thestylesandrailsmitredandjointat thecornersbymeansofM.S.galvanised/ plasticbrackets of size75x220mmhavingwall thickness 1.0mmand stainless steel screws. The styles of the shutter reinforcedby insertinggalvanisedM.S. tubeof size 20x20mmand1mm(±0.1mm)wall thickness.Thelockrailmadeupof 'H' section,a uPVChollowsectionofsize100x24mmand2mm(±0.2mm)wall thickness, fixedto theshutterstylesbymeansofplastic/galvanisedM.S. 'U' cleats.Theshutter framefilled withauPVCmulti-chamberedsinglepanelofsizenot lessthan620mm,havingoverall thicknessof20mmand1mm(±0.1mm)wallthickness.Thepanelsfilledverticallyand tiebarattwoplacesbyinsertinghorizontally6mmgalvanisedM.S.rodandfastenedwith nutsandwashers,completeaspermanufacturer'sspecificationanddirectionofEngineer in-charge. (For W.C. and bathroom door shutter).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. cum 509.5 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

P/F asbestos sheet all complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore

Brick work with FPS fly ash bricks of class designation 7.5 in super structure using cement mortar 1:6

Half brickmasonrywith common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 824.35 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)

P/F UPVC pipeline all complete. 15mm dia

P/F UPVC pipeline all complete. 20mm dia

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not less than 110 gm

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Total impact of GST for the purpose of CTC