Bharat Coking Coal Limited Tender

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand

25 mm thick PS flooring

Cleaning of septic tank

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

24mmthickfactorymadePVCdoorshuttersmadeofstylesandrailsofauPVChollow sectionofsize59x24mmandwallthickness2mm(±0.2mm)withinbuiltedgingonboth sides.Thestylesandrailsmitredandjointat thecornersbymeansofM.S.galvanised/ plasticbrackets of size75x220mmhavingwall thickness 1.0mmand stainless steel screws. The styles of the shutter reinforcedby insertinggalvanisedM.S. tubeof size 20x20mmand1mm(±0.1mm)wall thickness.Thelockrailmadeupof 'H' section,a uPVChollowsectionofsize100x24mmand2mm(±0.2mm)wall thickness, fixedto theshutterstylesbymeansofplastic/galvanisedM.S. 'U' cleats.Theshutter framefilled withauPVCmulti-chamberedsinglepanelofsizenot lessthan620mm,havingoverall thicknessof20mmand1mm(±0.1mm)wallthickness.Thepanelsfilledverticallyand tiebarattwoplacesbyinsertinghorizontally6mmgalvanisedM.S.rodandfastenedwith nutsandwashers,completeaspermanufacturer'sspecificationanddirectionofEngineer in-charge. (For W.C. and bathroom door shutter).

White washing with lime to give an even shade : 13.87.1 Old work (two or more coats)

P/F 2 mm MS sheet door

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Flyash flat brick soling of C/D 7.5

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Flyash brick work 1:6 cm S/S

P/F asbestos sheet

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

15 mm UPVC pipe external work

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Total impact of GST for the purpose of CTC