Bharat Coking Coal Limited Tender

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

25 mm thick PS flooring (1:2:4)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

P/F 2mm MS sheet door

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Half brickmasonrywith common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Flyash brick flat soling of C/D 7.5

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Brickworkwith clay flyashF.P.S. (nonmodular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

24mmthickfactorymadePVCdoorshuttersmadeofstylesandrailsofauPVChollow sectionofsize59x24mmandwallthickness2mm(±0.2mm)withinbuiltedgingonboth sides.Thestylesandrailsmitredandjointat thecornersbymeansofM.S.galvanised/ plasticbrackets of size75x220mmhavingwall thickness 1.0mmand stainless steel screws. The styles of the shutter reinforcedby insertinggalvanisedM.S. tubeof size 20x20mmand1mm(±0.1mm)wall thickness.Thelockrailmadeupof 'H' section,a uPVChollowsectionofsize100x24mmand2mm(±0.2mm)wall thickness, fixedto theshutterstylesbymeansofplastic/galvanisedM.S. 'U' cleats.Theshutter framefilled withauPVCmulti-chamberedsinglepanelofsizenot lessthan620mm,havingoverall thicknessof20mmand1mm(±0.1mm)wallthickness.Thepanelsfilledverticallyand tiebarattwoplacesbyinsertinghorizontally6mmgalvanisedM.S.rodandfastenedwith nutsandwashers,completeaspermanufacturer'sspecificationanddirectionofEngineer in-charge. (For W.C. and bathroom door shutter).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Total impact of GST for the purpose of CTC