University Of Jammu Tender

... More
The University Of Jammu has issued a formal invitation for competitive bids for Upgradation/ Macadamization Of Road Networking Of University Of Kashmir in Srinagar, Jammu & Kashmir, with an estimated contract value of Rs. 5,91,68,000. The bid opening date for this tender is 10-04-2025 and the last date for bid submission is 30-04-2025. Interested bidders for University Of Jammu tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

University Of Jammu Tender

Works
Civil And Construction
Road Construction
Eprocure
Opening Date10 Apr 2025
Closing Date30 Apr 2025
Tender Amount₹ 5,91,68,000 
Notes
Download

AI Insights

Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "AAY/Special Class" for Civil contractors having MoU with registration HMPO.
Bid Capacity
... View More
Available Bid capacity = (A x N x M - B) Where: A = Maximum value of Civil Engineering works executed in any one year during the last Five years N = Number of years prescribed for completion of the works for which bids are invited. M = 2 B = Value at current price level of the existing commitments and on-going works to be completed during the next years (Period of completion of the works for which bids are invited).
Technical Capacity
... View More
The required prior work experience for the bidder includes completing similar works during the last seven financial years. The specific requirements are as follows: - Three similar completed works each costing not less than 40% of the estimated cost; - Two similar completed works each costing not less than 50% of the estimated cost; - One similar completed work costing not less than 80% of the estimated cost. Substantial completion is based on 80% or more of the works completed under the contract. The value of work executed shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per financial year. Additionally, the bidder should have completed or substantially completed successfully a single work of similar nature in any Government or Semi-Government department during the last 7 financial years. The bidder should also demonstrate annual turnover from construction. For joint ventures, the lead partner should have annual turnover from construction, and financial capability to meet cash flow requirement of subject contract not less than 50% of the respective limits prescribed. The junior partner should have the same qualifications as the lead partner, except for the financial capability, which should be at least 25% of the respective limits prescribed. The bidder must undertake to invest a minimum cash up to 25% of the contract value of work during implementation and demonstrate having access to credit facilities of not less than 10% of the value of the contract/contracts applied for.

Costs

Summary

Upgradation/ Macadamization Of Road Networking Of University Of Kashmir

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Upgradation/ Macadamization of Road Networking of University of Kashmir
Upgradation/ Macadamization of Road Networking of University of Kashmir
Standard Bidding Document (SBD)
Report Missing Document

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Providing/ Laying 50mm thick compacted premix bituminious macadam base coarse with stone aggregate of quality, size and grading as specified in MORTH specifications and straight run bitumen of VG-10 grade @ 3.5% by weight of total mix (@70 Kgs/ Cum) including hot mix of stone aggregate and bitumen in hot mix plant, transporting and laying mixed material with power finisher to the required level and grade, rolling with road roller of 8 to 10 tonnes capacity to achieve the required compaction and density including cost and carriage of all materials involved from source up to site of work complete

1163.17

8590

9992735.31

... More
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 metres.

23263.4

153

3559300.2

... More
Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work (Two or more coats)

2952.6

226

669059.16

... More
Providing, laying, spreading and compacting graded stone aggregate (sizerange 53 mm to 0.075 mm ) to wet mix macadam (WMM) specificationincluding premixing the material with water at OMC in mechanical mixplant, carriage of mixed material by tipper to site, for all leads & lifts,Blaying in uniform layers with mechanical paver finisher in sub- base / basecourse on wellprepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as perspecifications and directions of Engineer-in-Charge

1744.76

1885

3290530.12

... More
Providing and applying tack coat using hot straight run bitumen of grade VG- 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on..... a) W.B.M. @ 0.75 Kg/SQM

23263.4

74

1729633.79

... More
Supplying, stacking & laying of WBM Grade II with graded stone aggregate at site of size range ( 63 mm to 45 mm) (Crushed ) incl carriage, including stone screenings(11.2mm nominal size)/ chippings,binding material including watering & compaction/ Consolidation with road roller 8-10 Mt Capacity all complete

1744.76

2500

4361900

... More
Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates

-

-

-

... More
Providing/ Laying of 6mm thick compacted seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing complete as per MORTH specifications and including cost and carriage of all materials involved from source up to the site of work complete. Seal coat to be laid directly over bituminous macadam.

73869.1

101

7490326.74

... More
Providing and laying 25 mm thick, semi dense Bituminous concrete using mineral aggregate satisfying the gradation set out in specifications with 5 percent binder content (By weight of total mix) with Bitumen 80/100 grade with the aid of hot mix plant and paver finisher including rolling with road roller of 8 to 10 tonne capacity to achieve required compaction and density including cost of all materials upto the site of work complete, tools, equipments and all allied machinery, labour, taxes, fee, testing charges for maintaining quality control during and execution of complete in all respects, including cost and carriage of bitumen (VG10)

73869.1

293

21651033.21

... More
Providing and applying tack coat using hot straight run bitumen of grade VG- 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on..... a) On bitumen surface @ 0.50 Kg/sqm.

50605.7

55

2793434.64



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.