University Of Jammu Tender

Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rest including long bend. (Sample to be approved by EIC)

Providing and fixing of the following CP fittings. (Jaquar Continental hindware Series or equivalent make

Angle Value

Soap Case

Towel Rod

CP Grating

Bib Cock

PVC Connection

Looking Mirror 18" x 24"

washbasin with pedestal

washbasin mixer

wall mixer

Providing and fixing of PPR pipes complete with ppr fittings and clamps including adapters etc (RAK/ Supreme/ Vectus/ equivalent) complete including cutting and making good the walls etc.

25mm Dia

32mm

Providing and fixing of the following fittings.PPR/G.I fittings (RAK/ Supreme/ Vectus/ equivalent)

ball valve 32mm Dia

Ball Valve 25mm Dia

32mm Dia Union ppr

25mm Dia Union ppr

Providing and fixing of PVC pipe (Type “B”) in proper gradient including all necessary fittings 100mm

Providing and fixing of the following PVC fittings. 100mm Dia Floor Trap

Construct brick masonry man hole in cement mortar 1:4, top slab with 1:2:4 mix, foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4. Size 45x 45 x 45cm (depth varies according to levels) including PVC manhole cover / concrete slabcomplete in all respects.

Aluminium Work . Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, dashfastners, handles, hinges, all complete as per architectural drawings and the directions of Engineer-in-charge. (including Glazing, paneling, sliding channels/ sliding arrangement and other fittings complete)Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 2.5"x1.5" sections 1.5mm thick

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all required tankey nipples and excluding the base support for tank (Syntax/Comfort or equivalent having valid ISI license) complete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Construction of platform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix.

Labours for Miscellaneous works

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates