University Of Jammu Tender

Demolishing of old Wc platform, flooring upto desired depth,walls, tiles in floors and walls including plaster on walls,removing/taking out of old G.I/C.I/pvc pipe,mainholes including all fittings including stacking of serviceable material and disposal of un-serviceable material within 3 kms as directed by EIC complete job to its staisfaction. Job include cleaning of sewage & site

Half brick masonry with bricks of classdesignation 75 in superstructure up to all floor levelsIn cement mortar 1cement: 4 fine sand mortar

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering. All work up to all levels.M15 1:2:4 (1Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal Size) Crushed (mixed with waterproofing compound as directed by EIC ) including cost of formwork if required

Reinforcement of RCC works including straightening cutting bending placing in position & binding all complete mild steel & medium tensile steel bars

Construction of platform for WC with brick masanory in cement mortar 1:6 mix including filling of sand & laying of 15mm plaster in 1:4 mix

Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests.cost includes construction of platform of brick masonary/concrete complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confirming to I.S. 7231with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. ((Jaquar/ Hindware/ Cera/ Kerrovit or equivalent)

Providing and fixing wash basin (Cera) white vitreous china wash basin size 630x450mm bowl type

Providing and fixing wash basin (Cera) white vitreous china wash basin size 630x450mm with pedestal including wastepipe

Providing & fixing of following sanitary cp items cera hindware jaguar kerovit or equivalent make 15mm nominal dia

health faucet with chain

wall mixer

basin mixer

bib cock

two way bib cock

mirror

soap case

towel rod

spindle

angle valve

pvc connection

waste pipe

Providing and fixing of PVC Prince pipe (Type “B”) in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation.

100mm

75mm

50mm

Providing and fixing of the following PVC fittings. (Prince Make)100mm floor trap including p&f of cp grating 100mm

Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete.) Inside size 45cm x 45cm x 45cm deep depth varies as per the slope including C.I. manhole cover medium duty with frame of size 45x45mm size. With F.P.S. bricks /concrete slab with class designation 75 and with crushed stone aggregate complete in all respects

Providing & fixing of ppr ball valve of standard make

32MM

25MM

Providing & fixing of ppr UNION of standard make

32MM

25MM

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings, adaptors etc. This includes testing of joints complete as per direction of Engineer incharge. Internal work Concealed fixing the pipe etc. (Sample to be approved by the competent authority)including all types of adapters

25MM

32MM

Chipping of old plaster complete in all respects as directed by EIC including disposal of excess within lead as directed and cleaning the area

12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 coarse sand)

Providing and fixing 1st quality ceramic glazed digital wall tiles (300 x 450mm) or as reqd conforming to IS: 1375 of minimum thickness 5mm of approved make like KAJARIA,, in all colors, shades, except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, riser of steps and dodos over 12mm thick bed of cement mortar 1:3 (1 Cement: 3 coarse sand) and jointing with grey cement slurry @3.3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality ceramic glazed floor tiles of required size 600x600mm or as reqd (thickness to be specified by the manufacturer) of 1st quality conforming of IS :13755 of NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colors, such as white, Ivory, Grey, Fume Red Brown or as approved by Engineer In Charge over 20mm thick bed of cement mortar 1:4 (1 Cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete

Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding etc. complete at all levels. a) (Granite marble) of approved quality and color

PLAIN (NON PERFORATED) METAL FALSE CEILING 600X600mm Providing and fixing non - perforated (plain) metal tiled false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “m fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint. * Panel Details : Panels shall be fabricated from 0.50 mm thick (TCT) Galvanised sheet and Powder Coated on external surface shall have flanges on all four side to rest on the exposed grid system to give 600 x 600 mm centre to centre of "T". Panels should be 10 mm Tegular below. " T " to give visible groove look and Panel surface shall be 575mm x 575mm for 24mm T.8-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. * Perforation Details: NO PERFORATIONS all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Make armstrong/Hunter douglas, OWA. Including scaffolding, Level checking is to be done as per the satisfaction of EIC

Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All workup to all levels. 1:3:6 (1Cement: 3 fine sand: 6 gradedstone aggregate 20mm nominal Size)Crushed

Providing and laying vitrified floor tiles of size 600x600mm (thickness to be specified by the manufacturer) approved make in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work including spacers (Sample to be approved by EIC)

Engagement of plumber for dismentling of old sanitary fittings gi/ppr fittings complete as directed by EIC

Providing & fixing of pvc panelling 5mm thick of approved make including all related accessories like corner/top flashing, etc complete including grounds, including fixing, screwing complete

Providing & fixing of fibre glass of required thickness including cost of nails adhesive etc complete

Clearing grass and removal of the rubbish, garbagge,mud,upto specified depth with all leads and lifts and disposal outside the periphery of area cleared complete job.

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller or as directed including making good the undulation etc. and disposal of surplus earth upto 50 metres.

Providing and laying watering and compacting with 80 to 100 KN roller nallah muck GSB with aggregate size not exceeding 90mm GSB material to specific lines, grades, sections and density furnished work to be measured incl carriages complete

Supplying, stacking & laying of WBM Grade II with graded stone aggregate at site of size range ( 63 mm to 45 mm) (Crushed ) incl carriage, including stone screenings(11.2mm nominal size)/ chippings,binding material including watering & compaction/ Consolidation with road roller 8-10 Mt Capacity all complete

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specificationincluding premixing the material with water at OMC in mechanical mixplant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / basecourse on wellprepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as perspecifications and directions of Engineer-in-Charge

Providing and laying chequered vitrified floor tiles of size as reqd (thickness to specified by the manufacturer) approvedmake in all colors, shades as approved by engineer- in-charge laid on 20mm thickbed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the jointswith matching pigment or any other relevant pigment as directed includingcleaning the floor after finishing of work including spacers (Sample to be approvedby EIC)

Providing & fixing of stainless steel (grade 304) railing made of hollow tubes,channels etc including welding grinding,buffing ,polishing & making curvatures & fitting thesamewith necessary stainless nuts & bolts complete i.e fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc of required size of the top of the floor or the side of waist slab with suitable arrangements as per approval of engineer in-charge including posts complete as directed

Dismantling of existing wooden ceiling/walling including wood work in frames complete & stacking of serviceable material and disposal of unserviceable material as directed with all leads complete

Providing and fixing of ply wood includingcost of nails adhesive etc. complete at all places 6 mm

Dismantling of C.G.I. sheet roofing and stacking of serviceable material and disposal of unserviceable material within a lead as directed by the in-charge engineer.

Roofing Providing & fixing corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /selfdrilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses & ridge if required 0.50 mm thick with zinc coating not less than 275 gm./Sqm

Providing & fixing color coated corrugated G.S. sheet roofing fixed with nails with bitumen and G.I limpet washers /selfdrilling screws with washers/J- Hooks (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses 0.50 mm thick with zinc coating not less than 275 gm./Sqm

Providing and fixing wood work in frame work / joists of false ceiling, partitions, joists etc. sawn and put up in position. First Class imported wood.

Aluminium Work . Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainlessPowder coated aluminum (minimum thickness of powder coating 50 micron) Using 2.5"x1.5" sections 18 Gauge

Providing and fixing of water heater(geysers) (Havells/ Hindware/ Jaquar/ Venus or equivalent) including cost ofdash fasteners with nuts and washers

50 Litres

25 Litres

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade .one or more coats on old wood/plaster work

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates