University Of Jammu Tender

Steel Work Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete up to all floors. Thermo mechanically heated bars.

Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses,skirting,risers and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, polishing,curing etc. including moulding complete at all levels. whereever required as directed by EIC. (Black Granite-Jet Black) of approved quality.

Providing and fabrication of storage almirah of approved quality 19mm BWR Ply Sheets in sides, shelves and wherever required including 6mm BWR ply wood on back and 19MM pply to ply in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed faces & all internal faces of approved design and drawings including cost of following aluminum fittings and locks of Godrej/Link make. including all other necessary accessories complete in all respects. (For payments front face to be measured)....450-600 mm deep

Providing and laying polished vitrified wall/ floor tiles of size 600x600mm (thickness to be specified by the manufacturer) approved make like NITCO, JHONSON, KAJARIA in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) for floor, including 6mm Spacers, including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. One or more coats on old work including sand papering,scraping and one coat of primer if required.

Providing and fixing of glass pans with wooden fillets(beadings) including nails,adhesives of required size wherever necessary. Glass pans 3.5mm thick weighing 8.70 Kg / sqm.

Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels.In cement mortar 1cement: 4 fine sand mortar

Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type “B”) in proper gradient including all fittings like bends,door bends, collars,reducers halfways,door-tee in excavated trenches/holes in walls,floors, including jointing and refilling the excavated material complete including cost of excavation. 75mm dia. Pipe

Providing and fixing of PVC Foor Trap 75mm/100mm dia. Pipe

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge. all types of works fixing the pipe etc. (RAK/ Astral/ Finolex or equivalent)

PN-20 pipe, 25mm OD

PN-20 pipe, 32mm OD

Providing and fixing following plumbing fixtures of approved quality (RAK/ASTRAL or equivalent) Complete as directed.

union 25mm OD

union 32mm OD

ball valve 25mm OD

ball valve 32mm OD

Providing and fixing following plumbing fixtures of approved quality (Jaguar/Marc / Cera/equivalent) Complete as directed.

C.P. angle valve15mm nominal bore

C.P. sink mixer for lab 15mm nominal bore

PVC waste pipeS 32mm

PVC connection c.p brass unions15mm 18 to 24 inch long

C.P gratings 100mm

lab sink

Providing and fixing of water heater (geysers) of Jaguar/racold/Venus make including cost of dash fasteners with nuts and washers, C.P. tubes 25 Litre capacity complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels. 1:2:4 (1Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal Size) Crushed

12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 coarse sand)

Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade including applying necessary priming coat & scrapping. Old work

Form work. Centering and shuttering including strutting propping etc. removal of form work inSuspended floors, roofs, landings, balconies, access plat forms, Lintels, beams, plinth beams, girders, bressumers, cantilevers, Columns, pillars, piers, abutments, posts andstruts and edges of slabs etc. (M.S. Plates/Ply wood)

Aluminium Work . Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, dashfastners, handles, hinges, all complete as per architectural drawings and the directions of Engineer-in-charge. (including Glazing, paneling, sliding channels/ sliding arrangement and other fittings complete)Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 4"x2" sections 1.5mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing & fixing of laminated board flooring/ walling AC IV of solid core planks of quality make of specified thickness 8mm, quality & color with tongued & grooved jointing including cost of foam 2mm thick, edge profile, door profile, cost of nails, adhesive, cornice and other accessories complete including jambs etc complete

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates