University Of Jammu Tender

Supplying and fixing 0.5 A to 3 A rating, 240/415 V, 10 kA, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole ABB, Siemens, Eaton, Wipro

Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ABB, Siemens, Eaton, Wipro

single pole

Double pole

Supplying and fixing 40 - 63 A rating, 240/415 V, “C”-curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. Double pole ABB, Siemens, Eaton, Wipro

Supplying and fixing following rating, TPN, 415 V, MCB 10KA C curve in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A

Supplying and fixing following rating, TP, 415 V, MCB 10KA C curve in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A ABB, Siemens, Eaton, Wipro

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) ABB, Indo Asian, Havells

16 way (ACDB)

12 way , Double door (U DB)

8way (LDB/EDB/UDB submain distribution)

6way (LDB/ EDB)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (PDB) 6 way (4 + 18), Double door ABB, Havells, IndoAsian

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)(PVTPN/ACVTPN) 8 way (4 + 24), Double door ABB, Havells, IndoAsian

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links 160 Amp 25KA 4 pole Siemens, ABB, Eaton

Supplying, fixing, testing and commissioning of following Amperes of MCCBs with spreader links 100 Amp 25KA 4 pole (UPS input) Siemens, ABB, Eaton

Wiring for circuit (raw power)/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed in class heavy duty PVC conduit as required Polycab, Havells, Finolex Note : Rates of Suitable PVC conduit included in above description for the following items

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 x 4 sq.mm + 1 x 4 sq.mm earth wire

2 x 6 sq.mm + 1 x 6 sq.mm earth wire (UPS sub mains)

2 x 10 sq.mm + 1 x 10 sq.mm earth wire for Sub main wiring (UPS to floor DB)

4 x 6 sq.mm + 2 x 6 sq.mm earth wire for Sub main wiring

4 x 10 sq.mm + 2 x 10 sq.mm earth wire for Sub main wiring

4 x 16 sq.mm + 2 x 16 sq.mm earth wire for Sub main wiring

Supply, laying , of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade.i/c clamping as required Polycab, Havells, Gloster

240 SQMM 3.5 C (mains / DG) excluding excavation works in ground

150 SQMM SQMM 3.5 C ( CN)

70 SQMM 3.5 C (to PVTPN/ACVTPN)

16 SQMM 2 C ( lighting / UPS floor board)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 95 sq. mm and upto 185 sq. Mm

Above 185 sq. mm and upto 400 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 240 sq. mm (62mm)

3½ X 150 sq. mm (50mm)

3½ X 70 sq. mm (38mm)

2 X 16 sq. mm (22mm)

Supplying and fixing of Fan Junction of reputed make (FF)

supplying and fixing of MS deep junction boxes in slab (FF)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm (GI wire)

25 mm

Group A Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy duty class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. note: all items included like Conduit, wire, box, switches etc

(Group B) Wiring for fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. note: all items included like Conduit, wire, box, switches etc

Providing and fixing ofUPS power pointpower point (in loop .) with 1.5 sq. mm PVC insulated copper wire , through midium classPVC Conduit pipe with all necessary accessories i/c 6Amp switches, 5 Amp 3-pin socket 2 nos. recessed in wall covered with Modular Plates i/c Modular Box & MS boxof required size i/c 1.5 sq.mm PVC Insulated copper wire of FRLS as earth wire, Point taken up to DB duly tested and commissioned note: all items included like medium class PVC Conduit, wire, box, switches etc. Switches/ Sockets:- Siemens, ABB, Wipro Wire: Havells, Paraflex, Polycab, Finolex

Providing and fixing of Heating points using 4 sq.mmPVC insulated copper wire of FRLS through 1” 2mm heavy duty PVC conduit and providing and fixing of 6/16 Amp. of Modular Switch, socket recessed in wall covered with modular sheet/ MS box of required size including providing and fixing of 4mm² PVC insulated copper wire as earth wire, point taken up to D.B. duly tested and commissioned, complete point in all respets note: all items included like M class PVC Conduit, wire, MS box, switches etc.

Providing and fixing of Ac points using 4 sq mm PVC FRLS insulated copper wire through 1 inch medium class PVC conduit pipe and providing and fixing of 32 Amp modular MCB C curve with in modular 32 A socket (MCB/socket to be installed at different levels) including providing and fixing of 4sq. mm PVC insulated copper wire as earth wire, point taken up to D.B. duly tested and commissioned in all respects complete. note: all items included like Conduit, wire, box, switches etc.

Providing and fixing of AC / DC bell with adjustable valume setting of reputed make including cells/batteries as required.

Installation, testing and commissioning of pre-wired, (LED) fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as required.

Supply of 4 ft LED slim 20 Watt 110lm/w 230V Batten type lights(T5 Type) , complete in all respects. Wipro/Havells/Halonex

Supply of 1 ft LED slim 10 Watt 100lm/w 230V Batten type lights(T5 Type) , complete in all respects. Wipro/Havells/Halonex

Supply of 12 watt surface / recess LED slim 230V , complete in all respects. Wipro/Havells/Halonex

Supply of 15 Watt surface/ recess LED slim 230V , complete in all respects commertial Wipro/Havells/Halonex

Supply of 2ft x 2ft 36 Watt surface/ recess LED slim 230V , complete in all respects commertial Wipro/Havells/Halonex

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Suppyly, testing of 12”x12” flap window type exhaust fan complete with all accessories. etc .

Suppyly, testing of 8”x8” horizonta type exhaust fan with exhaust pipe top bend, the top bend should have potective mesh (jali) complete with all accessories. etc .

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of MS fan rods upto 2 .5 t0 3 feet including holes with nuts,bolts, washers, end clips as required

Supplying and fixing of MS Fan hooks fabricated in 5mm MS angle the top support should not be less than 18 inches including nuts, bolts etc as required as per site

Dismantaling of old wiring and allied fixtures etc and storing in proper way in Estates store.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections and modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Providing and fixing of lighning conductor finial, made of 25 mm dia. 900mm. Long GI tube, having single prone at top, with 85mm. Dia. 6mm thick GI base plate including holes, base insulators etc. complete as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying of 1000 mm wide, 2000mm length, 1.1kV grade, antiskid rubber mat, As per IS 15652-2006 and of reputed make to be spread in front of the 415 V switchgear panels /

Providing, fixing and Cladding with 3 mm thick matt finish Aluminium composite panel with all fixing arrangements to cover the pipe line/ finishing etc.

supplying , fixing of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)

Providing and fixing of 4.5kg. capacity I.S.I. Marked. (IS : 15683) Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge.

PORTABLE FIRE EXTINGUISHERS 'Providing and fixing ABC stored pressure dry chemical powder (monoammonium phosphate) Fire Extinguisher IS : 13849 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzel, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases. 4 Kg. Capacity

Supply, installation, testing & commissioning of 3 kVA 1 phase Inverter with 3x160AH 12V tubuler Batteries including suitable rack, input/output leads/ Switch sockets etc. to make the system operational. Note: Item Should have minimum of two years Warrenty and free service.

Providing fixing of hylam/ backalite sheet suitable for SS combines as per site requirement

Providing and fixing modular PVC Modulebox with 20 A MCB and 6 pin 25 A socket outlet combine of reputed make/ as per approval (INV i/p &o/p)

Supplying, fixing of MCCB MS door type Enclosure suitable for 100 Amp 4 P MCCB (UPS MCCB )

Supplying and fixing 63 A rating, 240/415 V, “C”-curve, miniature circuit breaker suitable for inductive load of following poles including MS MCB DB complete with connections, testing and commissioning etc. Double pole (UPS op)

Dismantling storing re installtion and re comissioning including vaccumisation, testing, gas filling etc of AC's of 1st floor ans

Shifting, fixing, installation of Panel 250 A MCCB ( incommer & 100- 160 A MCCB Out going Panel

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In frames, guard bar, ladder, brackets, gates and similar works.

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (SSR12.1.1) 1.60 mm thick with zinc coating not less than 350 gram/m2

Providing and laying in position of cement concrete M(1:2:4) in RCC for all types of structures including proper vibration and curing including broom finish if required including cost excavation, backfill etc of formwork and reinforcement etc all complete as per direction of EIC.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm) (LAN/tel)

4 Module (125mmX75mm)

Supply, fixing, Testing, commissioning of Wall Mount Rack - 6U 550 W x 450 D Specification Conforms to DIN 41494 OR equivalent ISO Standards. Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19" Mounting Rails with U-Marking. Welded to Frame Top and Bottom Cover, Vented and Field Cable entry exit cut outs UL Certified. Standard Accessories: 1U Cable Manager (1), Hardware Pkt of 20 (1 Pkt). 6 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit / 90 CFM /230V AC (1 No). Standard Color : Grey, Static Load : 40 kgs

Supply, Installation, testing & commissioning of CAT6 UTP Patch Cord – 3M Specifications: Features Category 6 Equipment cords, he work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100W Category 6 Cabling, Equipped with modular 8-position modular plugs on both ends, wired straight through with standards compliant wiring, Should have 50 micrinches of gold plating over nickel contacts, Should be covered by ETL verification program for compliance with TIA 568.C.2 , Mechanical : Cable Conductor size: 24 AWG stranded bare copper, Max O.D.: 5.6mm (.22”), Jacket: PVC UL-94V-O, Temperature range: -10oC t+80oC, echanical Characteristics – Plug Operating life: Minimum 750 insertion cycles, Contact blade: Phosphor bronze, Contact plating: 50µ” Gold, Plug dimensions & tolerances compliant with FCC Part 68.500 and IEC 60603-7, Approvals: UL 444 for copper conductor , Operating life: Minimum 750 insertion cycles, Electrical Characteristics – Plug Diélectrique with standing voltage :500 V AC, insolation résistance : 35 M Ohm (Max), Operating temperature: -10oC t80oC

Supply, Installation, testing & commissioning of CAT6 UTP Patch Cord – 1M Specifications: Features Category 6 Equipment cords, he work area equipment cords shall, at a minimum comply with proposed ANSI/TIA/EIA-568-C.2 Commercial Building Cabling Standards Transmission Performance Specifications for 4 pair 100W Category 6 Cabling, Equipped with modular 8-position modular plugs on both ends, wired straight through with standards compliant wiring, Should have 50 micrinches of gold plating over nickel contacts, Should be covered by ETL verification program for compliance with TIA 568.C.2 , Mechanical : Cable Conductor size: 24 AWG stranded bare copper, Max O.D.: 5.6mm (.22”), Jacket: PVC UL-94V-O, Temperature range: -10oC t+80oC, echanical Characteristics – Plug Operating life: Minimum 750 insertion cycles, Contact blade: Phosphor bronze, Contact plating: 50µ” Gold, Plug dimensions & tolerances compliant with FCC Part 68.500 and IEC 60603-7, Approvals: UL 444 for copper conductor , Operating life: Minimum 750 insertion cycles, Electrical Characteristics – Plug Diélectrique with standing voltage :500 V AC, insolation résistance : 35 M Ohm (Max), Operating temperature: -10oC t80oC

Supply,fixing, testing and commissioning of 24 Port manageable Switch Switch Hardware Specification: Switch with at least 24 X 10/100/1000 Mbps Ports and 4 x 10G SFP+ Ports, 1 x RJ-45 Console Port & 6 kV surge protection on all Ethernet ports, Switch Should Support Link status detection, Port and LED shut-off, System hibernation Switching capacity should be 110Gbps or higher or non-blocking architecture. Switch packet forwarding rate should be 85 Mpps or higher or non-blocking architecture. Switch MAC table should be at least 16K or higher. Support for the Energy Efficient Ethernet (IEEE 802.3az) standard. Power input should be 100 to 240 VAC, 50/60 Hz, internal power supply. Power Saving (Green) Operating temperature should be -5 degree celsius to +50 degree celsius. EMI Certificate - CE, FCC/IEC and SAFETY Certificate - CB/ UL. Switch Software Specification Should support Head of Line blocking prevention for lower latency and better performance. Support Jumbo Frame up to 12K Bytes or higher. Should support IGMP Snooping, Able to create 250 or more IGMP groups and require support for IGMP Snooping Fast Leave,IGMP Snooping Querier Should support MLD Snooping, Able to create 250 or more MLD groups, Per VLAN MLD Snooping and require support for MLD Snooping Fast Leave. Link Aggregation LACP 802.3ad: Minimum 8 groups per device and 8 ports per group Port Mirroring : One-to-One / Many-to-One Switch Should Support Access Control List based on (ACL's) 802.1p priority, VLAN, MAC address, Ether type, IP address, DSCP, Protocol type, TCP/UDP port number, IPv6 Traffic Class, Max. ACL Profiles / Rules: 50 / 768 Should have 802.1D STP, 802.1w RSTP and 802.1s MSTP Spanning Tree Protocol. Should support Spanning tree Root restriction Should support Loopback detection (LBD) to detect the loop created by a specific port. Should support Multicast Filtering to filters or forward all unregistered groups. Switch should support IEEE 802.1Q VLAN tagging for Ethernet frames. Different type of VLAN like Port based, Auto Surveillance, Auto Voice, Asymmetric Vlan etc. should be available for configuration. Switch should support QoS (quality of service) IEEE 802.1P for traffic prioritization. It should support 8 queues per port. Different type of QoS priority like Strict Priority Queue and Weighted Round Robin. Port based ingress / egress rate limit function should be available with limit in increments as low as 16 Kbps Switch should support Neighbor Discovery (ND) protocol for IPv6. Switch should support to create atleast 4 IP interface Should support default routing and static routing with minimum 100 IPv4 static route entries and minimum 50 IPv6 static route entries. Support at least 700 rules shared by IPv4, MAC, and IPv6 & Each rule can only be associated with a single port. Should support port security to secures the access port based on MAC address. should have broadcast, multicast, and unicast storm control to prevents faulty end stations from degrading overall systems performance. Support Traffic Segmentation to restricted traffic flow from a single or group of ports, to a another group of ports. Should have SSH and SSL for IPv4 and IPv6. Require prevention of DoS attacks, which include Land, Blat, TCP Null Scan, TCP Xmas Scan and TCP SYNFIN. Should support 802.1X port based authentication. Should support ARP spoofing prevention. Should support DHCP snooping and DHCP server screening. Switch should able to create a binding table for IP + MAC + Port to prevents a malicious user from spoofing or to restrict the unauthorized users. Should support 802.1X RADIUS and local server database authentication. Should have option to check the status of copper cables using the cable-diagnostics time domain reflect meter (TDR). Able to manage trough Web-GUI, CLI, Telnet & SNMP Should support SNMP v1, v2c, v3 and SNMP Traps and Remote Monitoring (RMON). Should have dual Image support to reduce down time for the switches. Switch should support dynamic host configuration protocol (DHCP) auto configuration of multiple switches through a boot server eases switch deployment. Should have SNTP/NTP protocol for time synchronization. Should support Link Layer Discovery Protocol (LLDP) and LLDP-MED. Note Switch should be supplied with the all necessary components like Power cord, Rack-mount bracket, Installation Guide, etc. and necessary software image file to fulfil all above mention feature set from day 1. OEM Should be International certification for the ISO 45001 Health and Safety Management System, Information Security Management System: ISO 27001, ISO 9001 Quality Management System, ISO 14001 Environmental Management System, and ISO 14064-1 Greenhouse Gas Inventory Standards.

Supply, testing and commissioning of Access Points IEEE 802.11b/g/n/ac/ax, Wifi-6, 2x2+2x2 , PoE (802.3at) Access Point, Data Signal Rate Up to 1800 Mbps Access Point should have Wi-Fi: 802.11a/b/g/n /ac/ax, 802.11d & 11h, EAP, EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM Supports enhanced security – WPA/WPA2/WPA3 Personal and Enterprise, RADIUS client, and Cipher negotiation Access Point should have Interface Power Jack, Factory Reset Button, console port and LAN ports (PoE) Access Point should support Network Management: HTTP, HTTPS, Software Controller, Hardware Controller, SNMP Support, Telnet, Email Notification, Secure SSH Telnet. Access Point should allow auto fallback data rate for reliability, optimized throughput and transmission range Certifications - FCC, CE. Access Point should support Min Four Dual Band Internal Antennas: - 3 dBi (2.4 GHz), 4 dBi (5 GHz) and Maximum Output Power 22 dBm (2.4 GHz), 24 dBm (5 GHz) Access Point should support Wireless Resource Airtime Fairness, Connect Limit, Aging out, ACL RSSI and Band Steering, Wireless MAC ACL, WLAN Partition Support ARP Spoofing Prevention, Wireless Intrusion Protection, Bandwidth Optimization Access Point should support MAC-based access filtering and WLAN partitioning, Wi-Fi Multimedia Quality of Service (QoS), Traffic Control Uplink and Downlink limit, Access Point should show Ethernet traffic statistics and WLAN traffic statistic, Access Point should support Load balancing to optimize performance between Access Points Note Wi-Fi AP should be supplied with the all necessary components like wall and ceiling mount bracket, Installation Guide, etc. and necessary software image file to fulfil all above mention feature set from day 1.

CAT 6 end termination on both sides as per requirement

Providing and fixing of INDOOR 4U RACK • Front Glass Door (tinted,Toughened) with Lock & Key, 2 pairs of Mounting Rails with U-Marking,Welded Side • Dimensions: as per standards for NRV cabeling

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the H class PVC conduit as required.( conduit included ) 1 run of cable

Supply, both side termination and installation of flush mounted Enhanced Category 6 outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring. D-link Single outlet faceplate with RJ-45 jack

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm

25 mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

2 Pair

10 pair

Supplying and fixing in position the following sizes of powder coated MS housing for telephone tag block with hinged & lockable door including supply & fixing of tag block made out from self extinguishing polystrene material, corrosion resistant, highly resistant to shock, strudy and maintenance free KRONE type telephone tag block complete as required.

20Pair

100 pair

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections and modular plate etc. as required Telephone socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25mm

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Re- synchronizing testing and commissioning of existing UL listed multi Loop Addressable fire Alarm Control panel of EATON make with new lines with complete adress as required

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. (suitable for Eaton make existing adressable panel)

Supplying, installation, testing & commissioning of intelligentan alog addressable photothermal detector complete with mounting base complete as required. (make suitable for existing FAP)

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (make suitable for existing FAP)

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. (make suitable for existing FAP)

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. (make suitable for existing FAP)

Supplying, installation, testing & commissioning of addressable fire control module complete as required. (make suitable for existing FAP)

Supplying and fixing of MS deep junction boxes in slab for detectors

Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates