University Of Jammu Tender

Part-A (Sanctioned Schedule items) Earthing with Copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing as required.

Part-B (Non Schedule items) Providing, Installing, testing and commissioning of silent type Diesel generating set along with having prime power rating of 250 kVA 303 BHP 415 volts at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system and for 0.85 load factor and consisting of the followings:- a) Diesel Engine:-Diesel Engine 4 stroke water cooled electric start with 303 BHP 6 cylinder rating at 1500 RPM suitable for above output of alternator at 40 degree C, 50% RH at at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000 capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. b) Engine mounted instrument panel fitted with and having digital display for following: (i) Start-Stop Switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication(v) Battery charging indication (vi) RPM Indication (vii) Over Speed indication (viii) Low lub oil trip indication (ix) Engine hours indication c) Alternator:-Synchronous alternator rated at 250 KVA 303 and above BHP 415 volts at 1500 RPM, 3 Phase 50 Hz. AC Supply with 0.8 lagging power factors at 40 degree C, 50% RH and at 1000 meter MSL. The alternator shall be having SPSD enclosure, brushless continuous duty, self-excited and self-regulated through AVR conforming to IS:4722/BS 2613 suitable for tropical conditions and with class-F/H insulation. d) Base Frame and Foundation:-Both the engine and alternator shall be mounted on suitable base frame made of MS Channel with necessary reinforcement which shall be installed on suitable existing cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. e) Fuel Tank:-Minimum Daily Service fuel tank of 500 litres capacity fabricated out of 3mm thick M.S Sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS Class ‘C’ pipes of suitable dia complete with valves, level indications and accessories as required as per specifications. f) Exhaust System:-Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. g) Starting System:-12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable Nos. of batteries 18 plates, 180 AH capacity lead acid type as required as per specifications. h) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air in to the atmosphere as per specifications. Including construction of base platform for placing of Genset. The size of platform is (15’X9’X 1’-6”) of M-10 Grade (1:3:6) 1Cement, 3Sand, 6(20mm) crushed course agg. including plastering the exposed surface in C:M 1:4(Including GST and all other taxes applicable, contractor profit,overhead, Freight and Transit insurance etc.)(Make Engines:- Cummins, Catterpiller, Kirloskar Green, Mahindra, Ashok Leyland) (Make Alternators:- Stamford, Leyroy sommers, Kirloskar Green, Mahindra, Ashok Leyland).