University Of Jammu Tender

iii.2x6 Sq mm + 1x6 Sq mm

iv.4x6 Sq mm +2x6 Sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required- ISI Marked Anchor/High Power /AKG/) Equivalent make of required specification to be approved by the Engineer In charge 25 mm dia

Supplying and fixing 5 Amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. i. Single pole (Make Havells /Anchor/ C&S/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply and Fixing following ratings, Four pole, 415 volts, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as reqd. 63 Amp ratings (Make Havells /Anchor/ C&S/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply and Fixing following ratings, four pole, 415 volts, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as reqd. 100Amp ratings (Make Havells /Anchor/ C&S/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply and fixing of metal Box of following size on the surface/recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200mm x 125mm x 60mm deep

100mm x 100mm x 60mm deep

Supply & fixing 15/16 amp piano type switch on the existing switch box or cover including connection as required. (Make: Anchor/Havells /HPL/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply & fixing 6 pin 15/16 amp socket outlet on the existing switch box or cover including connection as required (Make: Havells/ HPL/ Anchor/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply & fixing 5/6 amp piano type switch on the existing switch box or cover including connection as required (Make :Havells/ HPL / Anchor /Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply & fixing 3 pin 5/6 amp socket outlet on the existing switch box or cover including connection as required(Make: Havells/ HPL / Anchor /Great white/ Equivalent make of required specification to be approved by the Engineer In charge)

Supplying and fixing following ways horizontal type three pole , and Neutral, sheet steel MCB Distribution Board 415V on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators. i.8 way(4+24), Double door Havells/Anchor /I.A /HPL/ Equivalent make of required specification to be approved by the Engineer In charge

Supply & fixing two module stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. as required. (Make Havells/ HPL / Anchor /SSK/ C&S/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Supplying and fixing brass batten/Angle holder including connection etc. as required. (Make Havells/ HPL / Anchor / C&S/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Providing and fixing following rating and breaking capacity MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Anchor /Havells /HPL/I.A/ Equivalent make of required specification to be approved by the Engineer In charge) 315 AMP 35K TP MCCB

100 AMP 16K TP MCCB

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required (Wire Make ISI Marked Havells/HPL/Anchor/KEI/Polycab/ Equivalent make of required specification to be approved by the Engineer In charge) i.1x1.5 sqmm

ii. 2x2.5 sqmm

iii.2x6 sqmm

Earthing with G.I earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Providing and fixing 25x5mm strip surface or in recess for connection etc as required.

Part-B (Non Schedule items) Supply &Installation of following type of surface mounted/recessed mounted decorative Indoor Linear energy saving , energy efficient LED Lumainiers complete with connection testing and commissioning. Make (Halonix/ Havells/ Syska/Bajaj/ Greatwhite/ Philips/HPL/ Equivalent make of required specification to be approved by the Engineer In charge) a. 18 to 22watt, 220volts, 50Hz, 1200mm with rated input 140V to 270V,lumen efficiency 100 lumens/watt,driver efficiency 90%,starting voltage 90v,Thd20,CRT80, CT6500K,Life 25000 hours,surge 2.5 KV,P.F=0.95,made of high grade polycarbonate body LED batten complete.

b. 600mmX600mm surface mounted LED luminaire CRCA sheet housing comprising of White (WH) LED’s connected in series parallel. Opal diffuser fixed in separate CRCA sheet frame. Opal diffuser frame is held in with housing by screws for easy maintenance. Driver: Constant current LED driver. Finish: Housing white powder coated. (RAL9016). Fixture should have minimum system lumen of 4500lm & minimum efficiency at System level =100lumens/ watt, Life of fixture : 50K Hrs. @ L70B50 Lumen maintenance, CCT 5700k with same lumens/w. CRI 80, THD 10%@ 240v ac. An operating Voltage Range of 140 - 270 V. Minimum Internal Surge Protection 3kv, IP 20. BIS and OEM certification is required for LED Driver & Luminaire, As similar to Bajaj BZSSQL 45L/Philips/Havewlls/equivilant make of required specification to be approved by engineer in charge 36W

Supply, testing and commissioning of PVC sheathed Aluminum conductor 1100 volts graded PVC AA Armoured/unarmoured XLPE Cable including end termination, crimping, cost of thimbles, nuts bolts, glands, connection, testing and commissioning complete job. (Make: Havells / General/Polycab / Gloster/Klick Equivalent make of required specification to be approved by the Engineer In charge) 3 ½ core 70 sq mm armoured cable

2 core 16 sq mm armoured round cable

Supply, installation, testing, commissioning of 1200 mm sweep ceiling fans complete with blades BEE 3 to 5 star rated energy efficient .(Make: Havells /Anchor/Orient/Crompton/USHA Equivalent make of required specification to be approved by the Engineer In charge)

Supply, installation, testing, commissioning of heavy duty 300 mm sweep BEE 3 to 5 star rated energy efficient exhaust fan.Make: ( Anchor/Havells/Bajaj/Crompton/ Equivalent make of required specification to be approved by the Engineer In charge)

Providing/fixing 40 amp rating , 230 volts SPN MCB in the existing MCB DB or enclose complete with connection testing and commissioning complete Job. (Havells/Anchor/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Supplying and fixing following ways horizontal type MCB Distribution Board 415V on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators. i.4 way, For A.C Havells/Anchor /I.A /HPL/ Equivalent make of required specification to be approved by the Engineer In charge

Supply/installation, testing and commissioning of the following type of outdoor LED type floodlight /Street lights with Operting Voltage 110v to 270v AC,50 Hz,IP65/IP67/IP68, PF.0.95,Lumen 110lumen/watt,Life 50,000hours,beam angle greater than 120 degree,CCI 30000 to 65000K,housing in non corrosive hardware made up of Aluminium. Make (Bajaj/Anchor/Surya /Havells/ HPL/ Equivalent make of required specification to be approved by the Engineer In charge) A.45 to 60 Watt LED.

Supply Installation, Testing and Commisioning of compact and Semi-integrated intelligent designed 30W Solar Light Panel Luminaire with adjustable Light output automatically,Light output, Rust and Vermin proof Aluminium housing,dust and waterproof with minimum autonomy/Backup 2 days with dimming,Charging time atleast 1 day,ingress Protection = IP 65,Impact Protection = IK 06, ideally suitable for Street Lights Charge controller having Efficiency = 85% Luminaries efficacy = 100-125 lm/W, Correlated Colour Temperature 6000 ± 500K, LED Lamp Life = 50,000, Hours Solar Panel = 70 W(0/+4W) mono, Battery = 12.8v,30Ah Charger controller, Suitable for pole dia of 50-100 mm, complete job with GI Type Pole of 6m in Height including 4 year warranty after the completion of one Year Defect Libality period. During the warranty Period the contractor is required to replace the Fitting with New one without any extra Cost. 25% Secuarity shall be kept pending and the same shall be released @5% of each year till the completion of warrinty period of 5 Year. (In this Item Olny)

Supply and fixing of following rating onload I-O-II Four pole with advanced neutral on load change over switch confirms to IS 13947 (Part-3) IEC:609473) (Make I.A/Havells/HPL/Crompton 200 Amp

Supply & installation of CAT 6 2 module toll less information outlets complying fully or exceeding with category 6 connecting hardware specifications for all pair combinations upto 250 MHz. Outlets shall use lead frame technology, non PCB pyramid type complete as required.(Make Legrand/Delton/Havells/HPL/Anchor)

Design, manufacture, testing at works & supply, installation, testing & commissioning cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP 42 for indoor and IP54 for outdoor, shall be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/ insulated conductors/strips etc. (Make Electric Field/ Bharti Engineers/Gupta & Friends/ Jai maa/KED equivilant make of required specification to be approved by engineer in charge MAIN NORMAL CUM EMRENGECY a. INCOMING Space for 1to2 No. 100-630 Amp MCCB 35 kA and Space for 1 no. Change Over of 200A b. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. c. BUS BAR Space for 1 No. 100-630 Amp TPN Al. Bus bar of equal cross section for power load. d. OUTGOING Space for 2 to 4 No. 63-200Amp 4 pole MCCB Dimensions 3’x 3' x 1’6”