University Of Jammu Tender

iii. 4x10 Sq mm + 2x6 Sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required- ISI Marked Anchor/High Power /AKG/) Equivalent make of required specification to be approved by the Engineer In charge 25 mm dia

Supplying and fixing 5 Amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make Havells /Anchor/ C&S/HPL/ Equivalent make of required specification to be approved by the Engineer In charge) i. Single pole

Earthing with Copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.

Supply & fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Make Havells/ HPL / Anchor /SSK/ C&S/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply & fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Anchor/Havells /HPL/Great White) i.5/6 Amp Switch

ii.15/16 Amp Switch

iii.3 pin 5/6 Amp Socket

iv.6 pin 5/6 Amp Socket

v.Telephone Socket outlet

vi.TV antenna socket outlet

Supply & fixing following size/module,GI box alongwith modular base & coverplate for modular switches in recess etc. as required. (Make: Anchor/Havells /HPL/Great White) i.1 or 2 Module(75mm x 75mm)

ii.3 Module(100mm x 75mm)

iii.4 Module(125mm x 75mm)

Re-wiring for light point/fan point/call bell point exhaust fan point with 1.5 Sqm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/ PVC conduit including dismantling as required. (Wire Make ISI Marked Havells/Anchor/KEI/Polycab ) (Conduit Make - ISI Marked Anchor/High Power /AKG) Group ‘C’

Supplying and fixing following ways and poles, plain/horizontal sheet steel MCB Distribution Board on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators. Havells/Anchor /I.A /HPL/ Equivalent make of required specification to be approved by the Engineer In charge i.8 way(4+24), Double door

S/F D.P/TPN sheet steel enclosure on the surface/ recess along with 25/32 Amp 240 volts ‘C’ curve DP MCB complete with Connection testing and commissioning etc. as reqd. (Make Havells/HPL /Anchor/ Equivalent make of required specification to be approved by the Engineer In charge)

Supplying and drawing of following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required (Wire Make ISI Marked Havells/HPL/Anchor/KEI/Polycab ) i.2x6 sq mm

Supplying & drawing 2 pair (0.50)sq mm FR PVC insulated annealed copper conductor un armoured telephone cables in the existing surface/recessed steel or PVC Conduit as required (Make ISI Marked Havells/Anchor/ KEI/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply and Fixing following ratings, four pole, 415 volts, isolator in the existing MCB DB Complete with connections, testing and commissioning etc. as reqd. (Make Havells /Anchor/ C&S/HPL/ Equivalent make of required specification to be approved by the Engineer In charge) 63 Amp ratings

Supplying and fixing brass batten/Angle holder including connection etc. as required. (Make Havells/ HPL / Anchor / C&S/Great White/ Equivalent make of required specification to be approved by the Engineer In charge)

Providing and fixing following rating and breaking capacity MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Anchor /Havells /HPL/I.A/ Equivalent make of required specification to be approved by the Engineer In charge) 100 AMP 16K TP MCCB

Supply and installation of CAT 6 pair 23 AWG UTP Networking System Cable with cross member pair separator complete as required(Make Legrand /Havells / Anchor/D Link /HPL)

Part-B (Non Schedule items) Supply &Installation of following type of surface mounted/recessed mounted decorative Indoor Linear energy saving , energy efficient LED Lumainiers complete with connection testing and commissioning. Make (Halonix/ Havells/ Syska/Bajaj/ Greatwhite/ Philips/HPL/ Equivalent make of required specification to be approved by the Engineer In charge) a. LED Down lighter luminaire with not less than 2500 lumen and efficiency of 100 lm/Watt and lumen maintainence of 70% after 5000 hours with constant current driver output,operating range 150V-270V,50Hz AC supply,CCT80, colour temperature 5000 to 6000K,operating temperature 10 to 45 degree celcius aluminium body,life 5000hours.driver voltage 80 volts,PF0.95 and THD must be 10% and surge protection 2.5 Kv.The luminaire should be IP 20 protected of following ratings. I. 45 watt, 220volts, 2’x2’ Round/Square LED.

b. 18 to 22 watt,220volts,50Hz,1200mm with rated input 140V to 270V,lumen efficiency 100 lumens/watt,driver efficiency 90%,starting voltage 90v,Thd20,CRT80, CT6500K,Life 25000 hours,surge 2.5 KV,P.F=0.95,made of high grade polycarbonate body LED batten complete.

Supply /Installation testing and commissioning of 450 mm sweep wall mounted fan including the electronic regulators and connection with testing and commissioning etc complete Job BEE 3 to 5 star rated energy efficient. Make: (Anchor /Bajaj /Crompton/ Havells )

Supply & installation of CAT 6 2 module toll less information outlets complying fully or exceeding with category 6 connecting hardware specifications for all pair combinations upto 250 MHz. Outlets shall use lead frame technology, non PCB pyramid type complete as required.(Make Legrand/Delton/Havells/HPL/Anchor/ Equivalent make of required specification to be approved by the Engineer In charge)

Supply and installation of Singlex Face Plates along with clearly printed labels and holders complete as required(Make Legrand /Havells / Anchor/D Link /HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Providing/fixing 40 amp rating , 230 volts SPN MCB in the existing MCB DB or enclose complete with connection testing and commissioning complete Job. (Havells/Anchor/HPL/ Equivalent make of required specification to be approved by the Engineer In charge)

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cables as reqd.