University Of Jammu Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
University Of Jammu Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Apr 2025
Closing Date19 May 2025
Tender Amount₹ 3,61,20,000
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The formula for bid capacity can be represented as: Bid Capacity = (Annual Turnover * 2) or alternatively, Available Bid capacity = (A x N x M - B), where A is the maximum value of civil engineering constructions works executed in any one year, N is the number of years prescribed for completion of the work, M is a multiplying factor of 2.00, and B is the value of existing commencements and on-going works to be completed during the next ‘N’ years.
Technical Capacity
... View More
The required prior work experience for the bidder includes successfully completing or substantially completing similar works during the last seven financial years. The options for prior work experience are: 1. Three similar completed works, each costing not less than 40% of the estimated cost.
2. Two similar completed works, each costing not less than 50% of the estimated cost.
3. One similar completed work, costing not less than 80% of the estimated cost. The estimated cost for the specific work is 361.20 lacs. Substantial completion is defined as 80% (value-wise) or more of the works completed under the contract. The value of work executed should be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per financial year. Additionally, the bidder should have experience as a prime contractor or sub-contractor in the same name and style, with a certificate issued by an officer not below the rank of Executive Engineer. The bidder should also have a certificate of performance evaluation from the concerned Chief Engineer/Superintending Engineer/Executive Engineer. The bidder's average annual financial turnover should be at least 50% of the Advertised Cost during the last 5 years. The bidder is required to have prior work experience of executing and completing or substantially completing successfully a single work of similar nature in any Government or Semi-Government Department during the last 7 financial years. The specific values and percentages of similar works completed mentioned are:
- 40% of the estimated cost for three similar completed works
- 50% of the estimated cost for two similar completed works
- 80% of the estimated cost for one similar completed work
- 80% (value-wise) for substantial completion
- 7% per financial year for enhancing the actual value of work
- 50% of the Advertised Cost for the bidder's average annual financial turnover during the last 5 years
- 25% of the contract value of work for the minimum cash investment during implementation
- 10% of the contract value for the line of credit facility.
Costs
EMD
₹ 7,22,400Document Cost
₹ 5,500Tender Fee
Refer Documents
Summary
Construction Of Skill Development Centre At University Of Kashmir
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UDJK_276188_1Tender No
F(E.Tend)(Cons. Skill Dvlp)(UCD)/KU/09/25Tender Authority
University Of Jammu ViewPurchaser Address
-Website
http://http://jammuuniversity.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Skill Development Centre at University of Kashmir
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Back filling)
390.34
218
85250.26
... More
Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete.
267.77
1204
322528.97
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately
-
-
-
... More
All works upto plinth level
372.92
8021
2991228.61
... More
All works above plinth level upto floor V level
281.82
9412
2652503.93
... More
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein
250
941
235250
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
141.93
5733
813769.85
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations: footings, bases of columns etc. for mass concrete.
569.3
286
163019.06
... More
Suspended floors, roofs, landings, balconies and access platform.
959.55
718
689148.81
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
1344.3
577
776400.47
... More
Columns, pillars, piers, abutments, posts, and struts.
395.01
742
293314.68
... More
Stairs (excluding landings) except spiral staircases.
85.8
851
73028.67
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
52.93
262
13878.25
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.
122615.56
123
15106236.99
... More
Providing and laying autoclaved aerated concrete blocks masonry with 625mm long, 200 mm high & 225 mm thick AAC blocks (Grade 1 with 5 MPa minimum compressive strength when tested as per IS 6441-5 (1972), 650-750 kg/m3 density when tested as per IS 6441-1 (1972)) in superstructure above plinth level upto floor V level in block jointing mortar (Minimum 8 MPa compressive strength) complete. The rate includes providing and placing in position 2 nos. 8 mm dia M.S bars at every fifth course of masonry work. Blocks should be able to resist the transfer of heat through them maintaining a temperature difference of 5°C between inside & outside of the building
309.36
8200
2536752
... More
Supply/fixing of chicken mesh of approved make including cost of fixing on wall with required material all complete job
2125.56
250
531390
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood
6.75
164074
1107503.89
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
304
207
63034.4
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood (35mm Thick)
75.5
3201
241735.9
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick First class kail wood
56.62
2588
146541.05
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class kail wood 35 mm thick
43.01
3894
167519.65
... More
Providing and fixing 35mm thick wire guaze shutter using galvanized M.S wire gauze of average width for aperture 1.4m in both directions of wire dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finish of required size mecessary screws as per directions of EIC First class kail wood
43.01
3797
163326.17
... More
Providing and fixing 3.5mm including cost and fixing wooden fillets/ beeding of required size and shape with nail incl all carriage complete
66.74
850
56729
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm
28
251
7054.6
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
-
-
-
... More
200x10mm
56
95
5339.6
... More
100 x 10mm
170
63
10769.5
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
150mm
56
80
4480
... More
100mm
340
60
20400
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper
28
55
1551.2
... More
Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job
24.6
1285
31619.61
... More
Providing and laying vitrified floor tiles (Anti Skid) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300 mm x 300 mm
46.66
1650
76989
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes reparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
55.99
485
27160.75
... More
Providing and laying vitrified floor tiles (Anti Skid) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mm
410.39
1800
738702
... More
Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 8 mm thick
82.08
1800
147744
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. 450mm x 300mm
193.24
1250
241550
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (18mm Thick)
409.81
4655
1907952.42
... More
Providing edge moulding to 18 mm marble stone /granite stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge (Granite Work) Double moulding
200
381
76340
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate
425
562
238913.75
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
959.55
241
231491.44
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including all lifts, leads, carriage of the material.
1747.35
268
468988.74
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)
378.21
306
116053.74
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2mm Thick)
2706.9
181
490084.25
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
2706.9
64
173647.64
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two Coats)
2706.9
115
312376.26
... More
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
644.2
64
41615.32
... More
Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work.
644.2
131
84937.77
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
632.5
753
476746.88
... More
Carriage of Materials
-
-
-
... More
Stone aggregates for avg lead of 10km
732
279
204257.28
... More
Sand for an avg lead of 15Km
391
344
134695.59
... More
Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%