Tourism Department Tender

Snow Board Rental: Model: Rental Through all of the hybrid board experiments, rocker profile tweaks, and wild-shape designs, the classic camber and predictable performance has stood the test of time. • Worked to develop a familiar and stimulating board for all terrain. • The colors of the soles may be different depending on the size of snowboard. • A familiar and stimulating board for all terrains. BINDING All-mountain snowboard binding more than holds its own against any binding on the market and over-delivers for durability, performance, and value. The mid-flexing Binding is built on our rugged Profusion™ Chassis with seamless EVA foot beds and a built in 3º cant to provide premium-style comfort while putting the user in a natural athletic riding position for absorbing and attacking terrain. In addition, the AT Nylon High back features our Gap Eraser™ forward lean adjustment, eliminating the need for a standard lock block and allowing you to customize the level of board response - more contact equals more response. The Power Ramp easily slides in and out to perfectly match the outsole shape of your boots for quick power transfer on take-offs and control on rails. Our padded Custom Caddi™ 3D ankle strap is cushy and securely hugs your feet while allowing you to tweak and flex on grabs and presses, and the PerfectFit™ toe strap features a hinge design that can be custom shaped to any snowboard boot toe box shape. • Category: All Mountain, Freestyle. • Sizes: S, M, L • Binding Flex: 4-10 • High Back: All-terrain BOOT A snowboard boot that is much more than you bargained for and a noted over-achiever in our snowboard boot collection. Built with the tech you need from companies you trust, we partnered with BOA® and Intuition® to give you the bang-for-the-buck you are after. The H4 Coiler BOA® Fit System uses stainless steel BOA® laces to provide a secure closure with an effortless twist of a dial. The integrated Intuition® Comfort Foam 3D liner naturally forms to the shape of your foot and is constructed with internal J-bars to hug and cushion your ankles. We pair this heat-moldable liner with our easy-to-use Fast-In liner lacing for a premium fit. • Free Style • Powder • All Mountain • The H4 Coiler Boa® Fit System • Fast-In Liner System • Flex Zone Upper Cuff Note: Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Snow Board advanced : BOARD Backcountry kickers, side hits galore, fresh cord -- the ALL-NEW K2 Embassy has your back for wherever you take it. Engineered with versatility in mind, this directional all-mountain snowboard has become an instant classic amongst our staff and team riders. The heart of the Embassy snowboard is the BAP Core, consisting of Bamboo, Aspen, and Paulownia - sustainably harvested to provide a smooth feel and snappy flex that’s built to stand the test of time. The Combination Camber Profile adds just a bit of rocker to the nose and tail for a predictable feel in deep snow and smooth butters.We sandwich the core with ICG™ 10 Biax Fiberglass with tip-to-tail carbon stringers for high-speed stability and edge hold through choppy terrain and a little bit of taper for a classic feel that gets you out of your turns with silky precision. • Shape: Directional • Profile: Combination Camber • Snowboard Shape Notes: Traditional Shape • Base: Sintered 4000, Stone Finish, Sintered Base • Snowboard Core: BAP • Snowboard Glass: ICG 10 Biax Glass with Carbon • Snowboard Additive: Bio Resin • Snowboard Inserts: 2 X 4 BINDING The all-mountain snowboard binding is the perfect place to start. True board flex and unrivaled response with Multimount™ ankle strap positioning, allowing you to customize your flex and feel.Injected with a castor-bean based materials, the AM1 is equal parts eco and lightweight. All-Mountain-focused, asymmetrically shaped, and a predictable middle of the road flex pattern.Injected with a castor-bean based materials our SD1 ankle strap is lightweight and offers a fitting blend of flexibility and response.A dual-density toe strap designed to shape to the contour of any snowboard boot – manufactured out of castor-bean based materials. • Category: All Mountain, Freeride, Freestyle • Binding Flex: 6/10 • Highback: Single density castor bean. • PC ProFusion™ Chassis BOOT We designed the Maysis to perform like a workhorse and fit like a glove, and its feature-forward design has it ranked as a perennial bestseller. Our Maysis Wide snowboard boot features a last and a shell that are 7mm wider than a traditional snowboard boot. It’s success starts with a heat-moldable liner, made of open-cell Intuition® foam - allowing the liner to form to the exact shape of your leg, ankle, and foot for superior fit, warmth, and comfort. The secret to the award-winning fit is our Conda™ liner lacing system. Powered by a BOA® Fit System dial, this forgiving and adjustable harness is designed to pull the user's heel into the boot's heel pocket. This urethane-based harness hugs your ankle and flexes naturally. Externally, we started with an articulating cuff to reduce distortion when bending the knee, and we've added an abrasion-resistant rubber compound for unrelenting durability. A high-powered BOA® Fit System H4 Coiler closes the shell securely and can be done without ever removing your gloves. • Category: BOA®, Conda™ • Boot Flex: 7/10 • Snowboard Boot Upper: Articulating Cuff, Endo™ Construction, Rubber Reinforced • Boot Liner Extras: Internal J -Bars, External J-Bars,Cored Ankle Pockets • Boot Liner Construction: Intuition® Control Foam 3D,Recycled Coffee Mesh • Boot Liner Lacing: Single Destiny ASYM Conda™ • Boot Footbed: Harshmellow™ Plus Insole • Boot Outsole: This Grips!™ Premium Rubber,Harshmellow™ • Boot Lacing: TX3 BOA® Lacing,H4 Coiler BOA® Fit System • Note: Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Snow Board Racer: BOARD FIS With the new ALPINE Worldcup (FIS), A snowboard that is optimally adapted to the new conditions in racing. The consistent application of the Shape Technology gives the rider full control over the board as usual. With the newly developed Torsion Power Control System (TPCS), even more energy can be stored in the swing, which then dynamically supports the swing change. The adapted geometry allows maximum speed at the exit of the turn. Success is pre-programmed. • Clothbound Sidecut • Sandwich Titan Construction • Optimized K.Tec X Woodcore • Abs Sidewalls • Sintered Base • Length: 156cm, 162cm, 177cm, 186cm • Inserts For All flex Plate BINDING The high-end plate binding for racers and extreme carvers. Improved power transmission and flex performance due to new bail geometry. • 3 Sizes For Perfect Flex Performance • Quick And Direct Power Transmission • Anodized Titanium Coating For Excellent Looks And Corrosion Resistance • Stiff Side Flex Especially For Very Narrow Boards And Steep Binding Angles • Eds-Shock Absorption System For Full Control • Extremely Stable Due To Extra Thick 5.9 Mm Stainless Steel Bails BOOT A Hardboot is available in shell sizes A, B, C, D and in two different harnesses. From Mondo Point 23.0 to 29.5With Grilamid®, which has a very low heat reaction and very high strength. Optimized geometry and design, for ideal function and more precise adjustment • Reinforced Mechanics • Infinitely Adjustable Tilt Angle • Hardness Adjustment With Different Springs • Stronger Back Mechanic • Variable Angle of Inclination Exchangeable Springs for Hardening Adjustment Note: Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Ice Skates: (a) Should have a SoftBoot® design. (b) Should provide comfort and breathability. (c) Should be backed up by the Stability plus Cuff which provides ample support and flexibility. (d) Should be perfect for year-round skating at the rink or winter skating on frozen ponds with water repellant materials and a warm brushed lining to keep skating in comfort. (e) Should have the injection locked stainless steel blades, pre-sharpened and keep you gliding smooth and edging clean on the ice. (f) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Ski exercise Trade Mill: It should be the ultimate ski fitness machine for advanced and professional skiers. The training should work on the principle of weight transfer, balance and agility, which builds strength through the lateral motion. • Must be compatible for advanced and professional skiers • Should help with ski fitness, balance and agility • Features should include: tilted rotating frame, which simulates carving ski turn perfectly • Should include: PRO SKI APP - provides technical and performance analysis of your trainings • Should focus on leg, core, arms and shoulder strength, while providing joint stability and mobility • Should be low impact cardio exercise, safe to use in joint rehabilitation • Should offers 6 intensity levels and two training modes (slalom and giant slalom) • Must be suitable for fitness, ski clubs and also home use • Dimensions and weight of the palette:L 195cm x W 55cm x H 137cm, weight 175kg • Assembled:L 192cm x W 130cm x H 110cm, weight 143kg • Should include: Professional Hand Holder, Race Frame, PRO SKI APP, Rotation Platform, Ski Simulator All in One Cart • Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Snow board exercise trade mill: Snowboard Simulator should focus on building base strength and endurance necessary for hitting the slopes much better. Simulator should be a great off and pre-season conditioning trainer & great for balance, coordination and improving technique throughout the winter season. • Should be suitable for alpine and freestyle snowboarders • Must be enabled to mimic turns which in the past could only be achieved on the snow • Should be low impact exercise and a perfect choice to prepare for the next winter season • Should focus on building your base strength and endurance necessary for hitting the slopes much better • Simulator should be great for balance, coordination and improving technique throughout the winter season • Portable machine, should be suitable for indoor and home us • Dimensions and weight of the package:L 178cm x W 70cm x H 30cm, weight 42kg • Assembled:L 173cm x W 68cm x H 125cm, weight 40kg • Should include:Basic frame, F-type Cart, Hand holder, Complete workout system support • Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Micro Traxtion: (a) Should be compact and lightweight progress-capture pulley designed for crevasse rescue, hauling, and self-rescue, and for use as an emergency ascender. (b) The cam should belocked in the open position so the device can be used as a simple pulley. (c) Min. Rope diameter: 7 mm (d) Max. Rope diameter: 11 mm (e) Sheave type: Sealed ball bearings (f) Sheave diameter: 27 mm (g) Working load: 2 x 2.5 = 5 kN (h) Breaking strength: 2 x 7,5 = 15 Kn (i) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Mini Traxtion: (a) Should be an openable progress-capture pulley that allows the rope to be installed while the pulley is connected to the anchor. (b) The cam should belocked in the open position so the device can be used as a simple pulley. (c) Material(s): Aluminum, stainless steel, nylon (d) Min. Rope diameter: 7 mm (e) Max. Rope diameter: 11 mm (f) Sheave type: Sealed ball bearings (g) Sheave diameter: 32 mm (h) Working load: 2 x 2.5 = 5 kN (i) Breaking strength: 2 x 10 = 20 Kn (j) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Pro Traxtion: (a) Should be possible to open, even when attached to the anchor, the PRO TRAXION progress-capture pulley must be designed for setting up haul systems. (b) Should have a large diameter sheave mounted on sealed ball bearings and excellent efficiency, (c) Material(s): Aluminum, stainless steel, nylon (d) Min. rope diameter: 8 mm (e) Max. rope diameter: 13 mm (f) Sheave type: Sealed ball bearings (g) Sheave diameter: 38 mm (h) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Paw Riging: (a) Material should be Aluminum (b) Range: Rigging Plate (c) Weight: Approximately 188 grams (d) Dimensions: 173.6 x 84.5 mm (e) Aperture: 20 mm and 23.5 mm (f) Working load: 9 kN (g) Breaking load: 45 kN (h) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Rope Grab: (a) Must be an aluminum mobile fall arrest device with swiveling side plate. (b) Should easily follow the operator both up and down and lock in the event of a fall. (c) Range: Fall Arrest (d) Should be compatible to use with MOBILE-LANYARD with two anchoring positions. (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Rescue Double Pulley : (a) Should be a twin pulley with two sheaves mounted in line on ball bearings for intensive zip-lining use. (b) Material should be aluminum (c) Must have two sheaves mounted on ball bearings ensure consistently high performance regardless of the user's weight (d) Additionally, to ensure traceability, each pulley should have an individual number. (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Auto Lock Carabineer:(a) Must be asymmetrical 3-MATIC triple action screw gate carabineer for lanyards. (b) Should be compatible to use with a belay system or during a rappel. (c) Must ensures that the descender is always well guided at the end of the carabineer. (d) Material should be aluminum (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Pair type Carabineer: (a) Should be a large HMS belaying carabineer with triple action 3 MATIC locking gate. (b) Must be suitable for HMS belays and double rope maneuvers, such as capstan or half-capstan. (c) Should have a large working surface which makes it easy to disengage even wet ropes (d) Should have a key lock system, which is also suitable for belaying and top roping. (e) Material should be aluminum (f) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Power Ascender: (a) Must be battery-powered and motorized system to ensure the transport of persons or loads to areas that are difficult to access and where occasional or recurring work is carried out. (b) The operation and use of the ACX should be able to be learned in special training courses. (c) Energy source: POA-004 power supply, Removable Battery. (d) Max. Ascent rate: 24 m/min. (e) Maximum descent speed: 25 m/min (f) Working load limit: 220.00 kg (g) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Expansion Bolts with rings: (a) Should be a simple top anchor device with 10 mm bolt hangers and mix of Single and double ring bolts. (b) Use cases: sports climbing, Canyoning, equipment (c) Weight: 208g (d) Main material: stainless steel (e) Main color: colorless (f) Weight: 95g (g) Total length: 10.4cm (h) Depth: 95m (i) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Heavy Sound Whistle: (a) Whistle up to 142db Loud, should have very long range, For Mountain Instructors. (b) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Special big umbrellas for high altitude mountains: (a) Resistant to heavy rain, snow, winds in high altitude with manual opening. (b) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Rock Pitons (Vertical, Horizontal, Multipurpose, Diagonal): (a) Features: Rock piton with different dimensions should be made of hardened steel for granite/ limestone. Tough enough to withstand repeated abuse in thin to medium-width cracks. (b) Hot forged Lightweight for strength and size with Numbered for quick identification (c) Material should be: NiCrMo Steel / ktl-coated. / Equivalent or better. (d) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Megaphone: (a) Should be a rugged megaphone, built to defy water damage, sinking, corrosion, cracking, and splitting. (b) Should be able to be used for up to a full day on a single charge. (c) Must have: P-67 (Excludes all dust and water for 30 minutes at 3.3ft / 1M submersion). (d) Dependent upon volume and continuity of operation. 8 hours typical operation – defined as speaking 35% of the time at volume level 6 1/2 hours. (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Megaphone Batteries: (a) Must be rechargeable lithium-polymer Battery. (b) Should have Lithium-Polymer Battery Pack 11.1VDC Typical, 8 W/hr. (c) Additionally should have charger Input Voltage: 90-264VAC, 50-60Hz, 7 Watts; Universal input capable – compatible with all world currents with appropriate adapter plug. (d) 80% rated capacity after 300 charge/discharge cycles 60% rated capacity after 500 charge/discharge cycles. (e) Charging: 0°C to 45°C / 32°F to 115°F (f) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Rucksack :CAPACITY 80 Litres (Including Detachable Day Pack) FRAME Internal frame with hard fibre support and aluminum rod USAGE Ideal for long duration mountain treks/ RAIN COVER Included inside the Velcro pocket at the base of the rucksack FABRIC MATERIAL 250 GSM Water-Repellant PU Coated Polyester BUCKLE MATERIAL Delrin WEBBING MATERIAL Polypropylene DIMENSIONS 78*35*28CM (When fully filled) WEIGHT 1-2 kg COMPARTMENTS Top section with zipper (Ideal for handy items like eye wear, medicines) 1. Main Upper Compartment 2. Main Lower Compartment - Separate bottom opening, to be used for storing soiled clothing, emergency items or shoes 3. Spacious deep pockets on each side 4. Mesh pockets on each side 5. Easily detachable 12-15 Litre Day Pack on the front 6. Laptop Sleeve FEATURES • Hard fiber support in the back along with aluminum rod provides a strong internal frame • Extra soft breathable cushioning on the back provides easy air flow while walking for long hours • 8 Utility straps to wrap additional items (sleeping bag, mat, camping equipment) on the sides, bottom and top • Elastic cords and hooks on the day pack to hold mountaineering gear and additional emergency items • Elastic loops for holding trekking poles • Double layered strong fabric at the bottom provides durability for rough usage and carrying excess load • Base Pads on the bottom protects from rough terrain LOAD MANAGEMENT • Torso adjustment straps to fit variable heights and physiques • Chest strap with elastic provides movability and aids in adjusting load • Four load setting pulls on the shoulder straps • Flexible and movable waist strap to fit below the pelvis area

Gaiters: (a) Gaiters should have construction which is abrasion and water-resistant to keep debris out, regardless of footwear choice when traveling through the mountains or desert. (b) Should have 100% nylon fabric is tough and abrasion-resistant, and the polyurethane coating adds an extra layer of protection against moisture. (c) Must have boot lace hooks, an elastic bottom edge, and a durable Hypalon instep strap keep the gaiters in place while in use, while the top closure buckle ensures a snug fit. (d) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Prussic Cord: (a) Must have a diameter of 6mm (b) Material: Polyamide (c) Sheath material: Polyamide (PA) (d) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA

Ice piton Warthog (Cord- hanger): (a) Cord Hanger ice screw is the old version of ice screws from warthog family of ice pitons. (b) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Rope rappelling (Static): (a) Should be the longstanding benchmark rope for work at height. (b) Material: Polyamide (c) Low impact force: 5.30 kN (d) Breaking load: 3000 daN (kg) (e) Static elongation: 3,0 % (f) Percentage of sheath: 38 % (g) Percentage of core: 62 % (h) Knotted strength: 1800 daN (kg) (i) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Mittens: (a) Made up of Heavy duty Canvas for Rough use. (b) Strong, Durable, and Versatile. (c) Palm and thumb with double layered Canvas and padding protection from heat generated during long rappels or lowers. (d) Ergonomic cut for high dexterity without being too tight. (e) Weight- Up to 200 g. (f) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Chock powder: (a) Should be very smooth and dry magnesium carbonate powder. (b) Fine magnesium carbonate powder that spreads well over the hands and doesn’t clump. (c) Main material: Magnesium carbonate (d) Color: White (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Multipurpose Shoe Inner Laces : (a) Should be resistant laces (b) Must be durable (c) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Multipurpose Shoe outer Laces : (d) Should be resistant laces (e) Must be durable (f) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Rental Ski wax: (a) Should be Fluor Free (b) Should be all condition wax. (c) Compatible for all snow types. (d) Color: White. (e) Should be bio degradable. (f) Universal hydrocarbon wax for all skis and snowboards. (g) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Ski Press: (a) Minimum voltage: 220 Volt. (b) Must be 1,000 Watt (c) Should be compatible for all types of skis and snowboards (d) Must have easy temperature adjustment (e) Should be supplied from a renowned brand/ company of more than 10 years of experience of supplying this type of Item and Certified by CE EN, UKCA and UIAA.

Crampon Carry Bags Foldable: (a) Crampon bag should be in fabric resistant to cuts, abrasions and punctures. (b) Should have a large double zip opening, and a net on one face designed to dry crampons faster. (c) Must have a reinforced bottom that protects the contents of our backpack from the sharp points of crampons