Technical Education Department Tender

Table For Lectures , Dimension Width 1500 mm x Depth 620 mm x Height 750 mm Structure,Frame of table Gable end and modesty panel, Stroage provided one side pedestal unit, Keyboard tray provided, tabletop material prelaminated particle board wood product of grade II type The thickness of the table top material 25 mm, thickness of the modesty panel material 19 mm, Gable end and modesty panel plain side Edge to be banded with PVC tape 2 mm thick with the help of hot melt glue, Table top edges Edge to be banded withg PVC tape 2 mm thick with the help of hot melt glue.

Computer Table , Size 1200 L x 600 B x 750 H mm approx. It shall be made of 18 mm thick high quality Pre-Laminated Particle boards with PVC strip edge banding of all exposed edge. One lockable drawer, one keyboard tray with space for CPU/UPS. Keyboard tray with telescopic ball slides to be used for keyboard tray. It should have place to keep CPU, Printer and UPS. It should also have lockable drawer Unit and Book self of appropriate size. The size of the open area for CPU should be approx. 350 W x 600 D x 500 H mm. Four swivel wheel made of plastic/ steel having load bearing of more than10 Kg/wheel. The particle board should be inter fitted with metal insert type screw fitting. Teak wood, water resistnat, Termite resistant wood

Table for Reading Room , Dimensions 900 mm Wide X 60010 mm Depth X 750 mm table top thickness 18 mm . Table Top Material Prelaminated particle board, all side beeding on edges of table top 2.0 mm thick PVC tape with the help of hot melt glue, Pedestal under structure mild steel square section of outside min 25 mm and wall thickness min 1.2 mm, Foot rest material MS square pipe of 25 mm with wall thickness of 1.02 mm 18 guage , Frame material MS square pipe of size 25 mm with wall thickness of 1.02 mm 18 gauge , Leg material MS square pipe of 25 mm with wall thickness of 1.02 mm 18 gauge ,

Table working table for Lab , Load Capacity 1000kg, Overall dimension WDH 1800x750x885mm/71x29.5x35inch 25mm medium density board with 2mm PVC laminate plus edge sealing. Teak wood, water resistnat, Termite resistant wood

Table working table for Fitting Shop , Fitting Shop work benches fitted with 6 bench vices 6inch min weight 12 kg to be provided on two planks four on each corner and two on the middle of planks made of size length 6ft, width 9.5inch, height 1.5inch fitted on top of frame the frame size Length 6ft, width 3ft, height 2ft 6 inch, the size of legs 4inchx4inch, the is properly painted with grey/yellow paint. The entire bench is made of Teak wood, water resistnat, Termite resistant wood

Table working table for Carpentry shop , Carpentry Shop work benches fitted with 2 bench vices 9inch min weight 15 kg to be provided on edge of two planks made of size length 6ft, width 9.5inch, height 1.5inch fitted on top of frame the frame size Length 6ft, width 3ft, height 2ft 6 inch, the size of legs 4 feet x 4 inch, the is properly painted with grey/yellow paint. The entire bench is made of Teak wood, water resistnat, Termite resistant wood

Centre Table , Wooden centre table size 48inchx24inch x21inch with top thickness 19mm, legs thickness 2inch sq. Shape Rectangular, Finish Teak wood, water resistnat, Termite resistant wood

Conference Table for meeting hall OVAL SHAPED , Height 2.5 feet Top Width 2 feet made of 19mm water proof ply ISI Marked Length As per Site adjustments Vertical portion in every 5 feet length of table should be 2.5 x 1.5 feet 19mm water proof ply ISI Marked Sun mica should be jewelled at top and outer side of table Front portion should be made of 12 mm thick water proof ply ISI Marked 4 inch dark coloured skirting should be provided in the base of table Sun mica should be fixed on table top and front portion with steal cover on under wiring AV aids Table should be fixed on site as per requirement It should have mike audio system and 3 socket 5 pin 5/15 amp per seat with necessary wiring. Teak wood, water resistnat, Termite resistant wood

Conference Chair for meeting hall , Non Revolving Type Dimensions L x W x H 500 x 550 x 950 mm Beautifully upholstered with ultra-soft and durable cushion. Chrome plated base for maximum stability, cushioned in a way to provide flexibility and resiliency and designed to provide firmer support in the lumbar region. Arms to be padded to provide essential comfort Sturdy cantilever frame chrome plated to provide comfort.

Chair Executive Revolving -HOD , Tilt mechanism Synchronic tilt mechanism and locking, Armrest adjustable, Backrest type Tilting type, pedestal base Aluminium die cast, Height adjustments Pneumatic, Pedestal Base Aluminium die cast, Twin wheel castor material Nylon, number of twin wheel castor 5 nos, Minimum diameter of twin wheel castor 50 mm , Armrest Material PU molded over metal insert.

Chair Wooden Office , Made of kail wood with arms seat 20inch x21inch x36inch with foam seat 3inch water resistnat, Termite resistant wood

Computer Chair Revolving Chair with Synchronic Tilt Mechanism , Tilt mechanism Synchronic tilt mechanism and locking, Armrest Fixed, Backrest type Fixed, pedestal base Nylon, Height adjustments Pneumatic, Pedestal Base Nylon, Twin wheel castor material Nylon, Number of twin wheel castor 5 nos, min diameter of twin wheel castor 50 mm, Armrest Mateial PU molded over plastic inner

Chair arm less , Tilt mechanism only revolving without tilting mechanism, upringh locking, without armrests, backrest type tilting type, number of twin wheel castor 5 nos, min diameter of twin wheel castor 50 mm, armrest material no armrest, twin wheel castor material nylon, pedestal base glass fiber nylon.

5 seater sofa with leatherite cover , Total nos of seats in the sofa set 5, number of single seater units nos 2, number of three seater units nos 1, frame covering fully upholstered, seat and backrest are permanently fixed with frame structure, density of cushion of backrest material kg/cubic M 45 , covering material for seat and backrest leatherite, frame structure material and size carved teak wood of minimum 25 mm thickness, seat cushion material foam, density of cushion of seat material kg/cubic M 30 type of spring in the base/seating Web suspension, lenght of single seater units in mm 920 mm, length of 3 seater units in 2250 mm, depth of sofa units in 400 mm sofa height 400 millimeter, sofa height 800 mm, arm width 100 mm, arm height 500 mm, seat height with seat cushion 510 mm, sofa leg height 75 mm, sofa length width/diameter 25 mm, seater cushion length 640 mm, seat cushion width 470mm, seat cushion thickness 100 mm, Backrest cushion length 920 mm, backrest cushion width 400, backrest cushion thickness 100 mm thickness of foam/rubber in arms 50 mm warranty 1 year

Center table , Number of storage under top double storage one at upper portion and one at bottom portion , Top material Flat glass, dimension of top 1194 mm L x 584 mm B x 460 mm H , shape of the centre table rectangular, style of centre table supported by set of legs, design of centre table with four legs only, number of storage under top double stroage one at upper poriton and one at bottom portion , thickness of top material 10 mm, thickness of frame material 36 mm, width x depth, or diameter of legs material, 35 mm x 40 mm, thickness of understructure support material 36 mm, warranty 1 years

Almirah Steel , width 36inch depth 18inch height 72inch having 5 shelves, sheet thickness 20 gauge prime C.R. sheet throughout anti rust treated each shelves should be formed such that edge and bend two turns at rt. Angle, first bend 25mm second bend 8mm, 3 hinges in each door double door locking arrangement with superior lock-7 lever brass lock, std. quality handle and door stiffener from inside in top hat section size 75mm width fitted in rubber gas kit with locker

Amirah Glass Door for Library , Size 914 W x 320 D x 1742 H mm. Rigid Knock down construction with Prime Quality CRCA Steel - Top, Back and side are made from 0.7 mm thick CRCA. Rest in 0.8 mm CRCA. 4 Doors having equalizing scissor mechanism for easy opening and closing. The 4 shelves should have stiffener for high load carrying capacity. Each Door has 6 Lever Cam lock with common key. Each Door has 3 mm thick transparent glass for clear inside vision secured in a Metal Frame through rubber gasket. Each compartment has storage shelf. All steel components should undergo eight tank anti rust treatment and oven baked epoxy polyester powder coating with thickness of 50 microns.

Rack 5 Shelves , width 36inch depth 18inch height 72inch rack shall be manufactured from slotted M.S. angle with open all sides, shelves gusset plates shall be manufactured from 18 SWG thick sheet, racks shall be assembled with G.I. bolt nut and washer, slotted angle and M.S. steel shall be made of cold rolled with anti-rust treatment and shall be finished with oven baked paint size of vertical slotted angle 40mm x40mm x2mm thick H/D rubber bushes shall be provided to the bottom of legs of slotted angle racks MS sheet used for racks shall be free from any defect and corrosion etc.

File Cabinet steel 4 Drawer , width 47cm depth 62 cm height 132cm made of 20 gauge C.R. sheet smooth drawer movement with double extension, telescopic sides with heavy duty ball bearing anti rebound mechanism, anti-tipping mechanism, anti-corrosion treatment for steel components high quality painted.

Book Case 4 Drawer Steel , fabricated out of 20 gauge CR sheet height 1736 mm width 914 mm depth 320 mm 4 compartment each compartment shall be provided with glass sliding shutter with suitable handle and in built lock thickness of glass 3 mm steel metal 0 point 9 mm gray colour painted

Stool , Standard round revolving stool Dia 16inch,Height Adjustable 40 to 55cm, 3inch foam thickness, Complete with a compact frame, a gaslift mechanism and adjustable height as per sample approved

White Writing Boards , Wall mounted White Board of Size 4 x 6 feet, Melamine writing Surface with aluminium frame, chrome coated corners.

Lecture Stand , Width - 25 inches, Depth - 18 inches, Height - 48 inches. Material - Engineered Wood. Finish - Plain Laminated provided with 1 no. shelf. Teak wood, water resistnat, Termite resistant wood

Steel Pigeon Hole minimum 9 boxs 3 x 3 boxes , Made of 20 gauge prime C.R. sheet high quality, grey colour painted full height steel hinges in each compartment door has stapple locking arrangement provision for name tags, std. quality handle for each compartment ventilating louvers size, width 12inch depth 15inch height 12inch per compartment .

Magazine Stand Wooden , Made of 19mm laminated board. The rack should be suitable for display and storage of magazine journals having 15 compartment each of size 10inch x12inch. Teak wood, water resistnat, Termite resistant wood

News paper Wooden Stand , Made of 19mm laminated board. Rear Height 48inch front height 46inch size 2ft x1.5ft. Teak wood, water resistnat, Termite resistant wood

Notice Board , Size 3ft x 4ft with glass cover with lock fabric base.

Notice Board , Size 6ft x 8ft with glass cover and lock fabric base.

Honours Board , Overall Size 1850 x 1200 x 22 mm thick Solid and Veneer, arch topped. Golden oak finish, with beaded edges, hand painted colour crest and hand painted Headings and Date/Name entries as desired wooden fiber.

Foot Rest , length 24inch width 18inch height 6inch - wooden

Partition Screen , The unit should consist of 3 panels, each panel of size of Height approx. 1800 mm and 500 mm wide. Primary Material Engineered Wood Frame Consisting of 3 panels to be placed in Zig-Zag Position. Partition to be of superior quality cloth properly fitted to the hinged frame.

Executive Chair For Principal , colour black, Seat Base Material hot pressed plywood, seat upholstry material leatherette, pedestal base chrome, number of twin wheel castor 5 nos, min. diameter of twin wheel caster 50 mm, armrest material PU molded over plastic inner, minimum density of foam 30 kg per cubic metre , min. seat height from floor surface 400 mm, min. seat height adjustment Upto 100 mm, min. width of seat 450 mm min. depth 450 mm backrest height highback 551 and above min. thickness of MS plate joining the understructure with seat 2 mm min. pedestal size diameter 650 mm warranty 1 year, backrest type tilting, designing the 360 degree revoling type and upright locking.

Aluminium Wall supporting sliding ladders, Height 20 Foot , Bottom Width 16 inch, Reach height Feet 20 foot, ladder closed height 3.6 foot, food open height 20 foot, Mateiral aluminium, wall supporting, number of step 20-40 step type flat, warranty 1 year,

Faculty Chair , Colour black, Min. seat height from floor surface 400 mm, min. seat height adjustment upto 100 mm, min. width of seat 500 mm min. depth of seat 450 mm, min. widgth of backrest 450 mm backrest height high back 551 and above min. thickness of MS plate joining the understructure with seat 2 mm, min. pedestal size diamter 650 mm, finish of exposed metal parts powder coated, warranty 1 year, Pedestal Base Nylon, Twin wheel castor material nylon, number of twin wheel castor 5 nos, minimum diameter of twin wheel castor 50 mm, Armrest material, PU molded over plastic inner, seat base material hot pressed plywood, seat material PU foam, minimum density of foam used in seat 30 kg per cubic meter, min. thickness of PU foam used in seat 30 mm, seat upholstery material 100% polyester fabric, padding at backrest PU foam, The min. density of foam used in the backrest 30 kg per cubic meter, backrest upholstery material mesh fabrics , upholstery material thickness/fabric substance used in seat/backrest min. 200 gsm for woven fabric , Revolving mechanism designed with 360 degree-revolving type and upright locking Height adjustment pneumatic, backrest type tilting type, seat depth adjustment Fixed type