Srinagar Smart City Limited Tender

Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 mlead : 15 mm to 40 mm nominal bore.

Dismantling C.l. pipes including excavation and refilling trenches after taking out the pipes manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipesand lead at site within 50 metre lead as per direction of Engineer incharge. Above 150 mm dia upto 300 mm dia.

Dismantling of flushing cistern of all types (C.I/PVC/ Viterous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 metres lead as directed by Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and laying of brick work with FPS bricks of class designation 75 in super structure above plinth level in all shapes & sizes in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing of 15 mm thick cement plaster on the rough side of single or half brick walls in 1:4 (1 cement : 4 fine sand).

Providing and laying vitrified floor tiles with water absorption less than 0.08% and confirming to I.S. 15622 of approved make like RAK ceramics, Nitco, Kajarya, Somany, Orient or equivalent in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching the pigment ete. Size of tile 30cmx30cm & above.

Providing and fixing first quality ceramic glazed tiles confirming to I.S. 13753 of minimum thickness 5 mm of approved make like RAK ceramics, Nitco, Kajarya, Somany, Orient or equivalent make in all colours, shades except burgundy, bottle green, black of any size over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) incl. pointing the joints with white cement and matching pigment etc.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer.

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etc. on concrete and brick work.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0. 901itre/10 sqm over an under coat of primer applied @ 0.75 1itre/10 sqm of approved brand and manufacture

Precast terrazo tiles 22mm thick with graded marble chips of size upto 12 mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20 mm thick bed of cement mortar 1 :4 ( 1 cement : 4 coarse sand)Light shade using white cement

Providing and fixing of readymade wood floor of approved brand& design like Action Tisa, Kajarria etc. Complete job.

Providing and fixing of readymade wood paneling 12 mm thick of budloo wood of approved brand, design and shape including finishing, polishing, Complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood.

Providing and fixing glass panes in wooden windows, clerestory windows, including nails, beadings etc. complete with : 4.0mm thick glass panes

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : lSI marked M.S. pressed bright finished butthinges with necessary screws of required size First class kail wood.

Providing and fixing flat pressed 31ayer medium density .particleboard or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) : 12 mm thick

Strctural steel / hollow tubular steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, complete.

Providing and fixing UV stabilized fibre glass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'l' hooks, bolts and nuts 8mm dia. G.l plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-Voilet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm, thick corrugated (2. 5" or 4.2" or 6") or stepdown (2" or 3" or 6") as specified.

Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates and similar works.

Providing and fixing M.S. steel sliding-shutters and fiber glass sheets with M.S. hollow tubular steel frame and diagonals braces of angle iron, M.S. gusset plates at the junction and corners with pulley, angle and T-iron guide at the top and bottom as per design and instructions of Engineer-in charge including applying a priming coat of approved steel primer, complete job.

Renewing W.l. or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts /welding and erection etc.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and sizeincluding necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)