Srinagar Smart City Limited Tender

Supply, installation testing, and commissioning including labour, carriage, freight, taxes, duties etc. Packaged Substation - 100kVA: Supply, Erection on existing C.C. foundation, Testing &Commissioning of 33kV Outdoor type Package Sub-Station consisting of 33/0.433kV, 100kVA Oil type transformer, 63kvservo stabilizer ,MV panel, LT panel inside GI sheet steel / Metallised Epoxy enclosure with interconnections, fully type tested as per the IEC-1330 complete in all respect each consisting of following items & as per detailed technical specifications: ).The job includes construction of masonary concrete foundation as per the size of PSS.

Supply, installation testing, and commissioning 33kv Cable Termination Kits (outdoor)

Straight through joints for single core 33KV cables

33KV Isolator with earthing blade (36KV, 800A, Outdoor, 3 poles, 25KA) alongwith errection of 2 No 9mtr long ST Poles ST 410 SP-33, Rod, handle, GI Channels,Pole clamps, LA Set, Disc insulators, cement bottming of poles, painting, anti climbing devices, danger plates, Nuts, bolts and all allied accessories and as per the directions of Engineer in charge.(Complete Job)

Supply ,Laying, Testing and Commissioning of 185 sqmm Single Core,11kV, XLPE FRLS Armored Cable (One-Spare Cable)

Laying of 11KV Single core cables using HDD (Boring) method with 4 inch HDPE PLB Duct (110mm OD) for laying of 11KV Grade cable

Cable termination kits for 11KV Cables

11KV Isolator complete with Rod, handle alongwith errection of 2 No 9mtr long ST Poles ST 410 SP-33, LA Set, GI Channels, Pole clamps,Pin insulators, Cement bottoming of poles, painting, anti climbing devices, danger plates, nuts, bolts and all allied accessories (2 isolators on 3 poles) and as per the directions of Engineer in charge.

Supply, Laying, Testing and Commissioning of 400 sqmm 1-Core,11kVGrade, XLPE FRLS Armoured Cable (One-Spare Cable)

Laying of 11KV Single core cables using HDD (Boring) method with 4 inch HDPE PLB Duct (110mm OD) for laying of 11KV Grade cable

Compact Sub station: Supply, installation testing, and commissioning including labour, carriage, freight, taxes, duties etc. Packaged Substation - 11Kv Outdoor type Packaged Sub Substation 11KV/0.433V 400Kva Oil type transformer Copper winding, MV Panel, LT Panel inside GI Sheet enclosure with interconnections fully type tested as per the IEC-1330 Complete in all respect consists of following: 1.) 3 ways Non – Extensible unit RMU with 2LBS +1VCB self with O/C+E/F Relay with digital electronic meter. 2.) 11Kv/0.433v400Kva3PhaseEEL-2DistributionTransformer3phaseoffcircuittapchanger +5% to -5% in steps of 2.5% at line end on HT Side and standard fitting OTI,WTI , Buchloz relay. 3.) LT Panel : 433 LT Indoor panel with 600 A Aluminium Bus Bar ( 100% for phase and 50% for Neutral) fabrication using 1.5/2mm CRCA Sheet steel Ingress protection IP2X/4X Complete with internal wiring consists of following: Incomer : 630 A , 4 P 433V 50 KA fix manual type microprocessor based release MCCB with ( OL, S/C Protection +communication port Resin Cast CT- 600/5 A , 10 VA Cl: 1.0 RYB ON-OFF Trip Indication Outgoing: 200 A 4P 433 V 25 KA fix manual type Microprocessor based release MCCB with ( OL,S/C Protection - 1 No. 400 A 4P 433 V 25 KA fix manual type Microprocessor based release MCCB with ( OL,S/C Protection - 1 No. (The Job includes construction of masonary concrete foundation of required size)

Supply, installation testing, and commissioning 11kv Cable Termination Kits

Supply, installation testing, and commissioning 11KV Isolator with Earthing Blade double break 2 pole 620 Amp

Providing and fixing of fabricated GI iron including clamps and braces of sorts as per site requirement

Supply, installation, testing and commissioning of Double door & 12 way LT feeder panel for energy meter(energy meter to be provided by departments) made up of 2mm thick CRCA sheet ,powder coated ,water proof, dust proof, warm proof, 2 pole MCCB 63amp (12NO). The panel shall also be provided with sets of VIF, indicators & suitable bus bar(250-630 amp Jas per requirement . This also includes cost of galvanized angle iron frame .The electric equipment are of standard make.

Supply ,Laying, Testing and Commissioning of 300sqmm 3.5Core,1.1kVGrade,XLPE , FRLS Armoured Cable (One spare cable)

Supply ,Laying, Testing and Commissioning of 185sqmm 3.5Core,1.1kVGrade,XLPE , FRLS Armoured Cable (One spare cable)

Supply ,Laying, Testing and Commissioning of 25sqmm 2 Core,1.1kVGrade,XLPE , FRLS Unarmoured Cable

Supply ,Laying, Testing and Commissioning of 185Sqmm Single Core,11kV,XLPE FRLS Armored Cable (One-Spare Cable)

Supply ,Laying, Testing and Commissioning of HDPE PLB-Duct (110 mm OD) for laying of11KV Grade cable

Cable termination kits for 11KV Cables

Supply ,Laying, Testing and Commissioning of 300sqmm 3.5Core,1.1kVGrade,XLPE , FRLS Armoured Cable (One spare cable)

Supply ,Laying, Testing and Commissioning of 185sqmm 3.5Core,1.1kVGrade,XLPE , FRLS Armoured Cable (One spare cable)

Supply ,Laying, Testing and Commissioning of 25sqmm 2 Core,1.1kVGrade, XLPE , FRLS Unarmoured Cable

3 phase 415V 1 No of 250Amp incommer 3 TP MCCB 25KA fitted with outgoing 1 No 100Amp SP MCCB, 11 No 40Amp DP for outgoing LT service lines, Distribution feeder pillar suitable for outdoor installation, made out of CRCA 2mm/1.6mm sheet painted through 7 tank process with PU painted Aluminium busbars 4P, Aluminium with heat shrinkable sleeves and adequate capacity complete with all accessories 12 way Distribution Feeder pillar, 250Amp main busbar for loop in loop out and 250Amp Aluminium busbar for service line connections.

Supply, installation testing, and commissioning Cable Termination Kits for 400mm sq

Supply, installation testing, and commissioning Cable Termination Kits for 185mm sq

Supply ,laying and fixing of HDPE Pipe (150mm inner dia) for carrying circuit for streetlighting and post-top poles.

Supply, laying and fixing of HDPE Pipe (50mm inner dia) for carrying circuit for streetlighting and post-top poles.