Srinagar Smart City Limited Tender

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Dismantling wooden ballies in posts and struts including stacking within 50 meters lead.

Disposal of Lime, moorum, building rubbish upto 10 km Lead

Providing hoisting and fixing trusses/Purlins/rafter/posts/posts-plates or like components including cost of screw etc. complete

Budloo first class

Deodar IInd Class

Second class Kail wood

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, and cleaning, refilling the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.(First class Deodar wood)

Providing wood work in frames of false ceiling, roof, partitions etc. sawn and fixed in position :Budloo / Fir wood

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: (Second class deodar wood)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Riveted and bolted

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing 100mm diameter GI water spouts as per detailed drawings in Wooden Deck and wearing surface/kerb etc. complete.

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate (20mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement(1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size))

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type ISI marked 90 mm dia uPVC pipes of Class III (6 Kg/sqcm) suitable for potable water with rubber ring joints (as per IS 4985-2000) of 90 mm outer dia with all accessories (excluding specials) complete including all material,labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Rough dressing of the trenched ground including breaking clods.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts (cost of sludge, manure or extra good earth, if needed, to be paid for separately)

Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge.

Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and stacking of Sweet Winter, Willlow, cuprous , logas kuniya, spairiya, keras japan , forusphia, queens japan standing rose , st rose, abiliya , Hamilayan charee, serinanga of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge.

Providing and fixing M.S. flat iron tree guard 60 cm dia. and 2 m high above ground level formed of 4 nos. 25x6 mm, 2.25m long and 8 nos. 25x3 mm 2 m long vertical M.S. flats riveted to 3 nos.25x6 mm MS flat iron rings in two halves, fixed together at site with required 6 no. of 8 mm dia. and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name The tree guard shall be suitably fixed to the ground by embedding four legs of the tree guard in pits of suitable dia. and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction on direction of Officer-in-charge

Providing and fixing Precast R.C.C. grating with frame 500x450 mm horizontal grating for Avenue Plantation complete in all respect as per satisfaction on direction of Officer-in-charge

Providing and fixing Wooden Brown Outdoor Garden Bench, With Backrest 2 seater complete in all respect as per satisfaction on direction of Officer-in-charge

CELESTIAL BINS 40 Lts.Stainless SteelWaste Containers or Rigid liners as per Specificationb. Made From High Quality Stainless Steel, including fixing at site as per the direction of manufacturer and engineer in charge.@ 100 mts

Electrical Works

Items for Illumination

Providing, fixing, testing and commissioning of LED FLOOD LIGHT OUTDOOR LIGHT 48 Watt, 18 Nos LED, CCT: 2400K,Lumen: 3771 lm, Beam angle: 8° Degree 230 Vac, CRI 80+, IP66 With Snoot DMX capabality as per specifications /Drawings of the SBD.

Providing, fixing, testing and commissioning of LED Point Source: 3Watt DC24V, 2400K, CRI80,180lm, IP67 Materials: Prismatic Diffuser and PC Shell with DMX as per specifications /Drawings of the SBD.

Providing, fixing, testing and commissioning Outdoor Linear Profile Light 20 Watt/Mtr, mono-coloured, LED, 2400K,120° Degree - Opal Encapsulated 1000lm/Mtr, CRI80, IP67 as per the specifications/Drawings of the SBD.

Providing, fixing, testing and commissioning of Male - Female Connector & accessories as per the requirment & specifications of the SBD.

Providing, fixing, testing and commissioning of 3in1 Connector & accessories as per the requirment specifications of the SBD.

Providing, fixing, testing and commissioning of DMX capabality diriver & accessories as per the requirment specifications of the SBD.

Providing, fixing, testing and commissioning of DMX Dimmable driver for 4 Meter Each & accessories as per the requirment & specifications of the SBD.

Providing, fixing, testing and commissioning of DMX controller & accessories as per the requirment & specifications of the SBD.

Providing, fixing, testing and commissioning of DMX controller Programming & accessories as per the specifications of the SBD.

Supply, installation ,testing and commissioning of 15 KVA 3 phase servo control stabliser oil cooled with input voltage of 160-450 volts, 50 HZ and a constant out put voltage of 400 volt including the canopy to protect during raining and snowing of suitable size with electriccontrols/circuitry in seperate chamber.The Stabliser shall be provide with high and low cut off voltage system, oveload/under load single phase protection and also shall resist the input and output +5% tolerance. the item includes its thimling as required at taping point for in and out. The Stabiliser shall be as per detailed technical specifications of the SBD & with a warranty of 2 years.

Providing, fabrication and installation of dust free MS Canopy Type kiosk of adequate size as per requirement with lockable door for protection of AVR and Battery bank with inverter seperately [For holding 15 KVA AVR and 32 No 150 Ah Batteries and UPS]

Construction of 8' length x 6' breadth cement concrete bed with a height of 1.5' ( A/G) & 1' U/G after spreading 4'' thick soling layer in 1:2:4 ratio including shuttering of required size with 6" RCC on top to avoid any damages & plastering in 1:4 mix of outer surface (complete bed ) to accomodate AVR, LT panel & other allied items.The items includes cement pointing and excavation of under ground trench all carraige/transportation up to site with removal of surplus excavated earth from site to dumping site.

Providing of chemical earthing for AVR/LT panel set by way of digging 2.5 Mtr. deep earth pit embedding a 2ft*2ft*4mm thick copper plate as main earthing electrode (38mm copper), connecting the plate with main control panel by 10 SWG copper wire with 1/2" dia. Full thread brass nuts, bolts and washers, refilling the pit with alternate layers of salt charcoal and earth.

Termination of cables, including cost of Crimping of Thimbles glands, tape and nuts , bolts and washers

Providing fixing of copper bus bar strip 25mm x 3mm

Outdoor canopy type LT feeder panel 3'x1.5'x4' (as per requirement) fabricated out of sheet steel of adequate guage for external use fitted with 63 Amp MCCB , 32/40 Amp TPN MCB (6No's), 20/32 Amp DP MCB ( 14 No's) , 2/4 Amp MCCB (20 N0's) & 100 Amp 4 strip copper Bus Bar. The panel shall also be provided with Automatic Astronomical timmer switching controllers for operation of street Lights with a set of voltmeter, ampere meter, indicator and backup protection / CT coil for panel of required capacity. The panel is to be supported on 4 no. angle iron legs to be grouted in cement concreate exluding the cost of RCC bed.

Providing, laying and fixing of PVC conduit along the length of the bridge for running of wiring for lighting and circuits etc. The conduit is to be laid after cutting suitable jaries in the walls with cutter, then fixing conduit in the jaries with J hooks or over the surface and fixing by means of saddles etc including PVC bends etc. a) 19 mm dia 2 mm thick

Providing, laying and fixing of PVC conduit along the length of the bridge for running of wiring for lighting and circuits etc. The conduit is to be laid after cutting suitable jaries in the walls with cutter, then fixing conduit in the jaries with J hooks or over the surface and fixing by means of saddles etc including PVC bends etc b) 25 mm dia 2 mm thick

Wiring for linear LED’s with 2 x 2.5 mm² and 1 x 1 mm FRLS PVC insulated copper conductor multi-stranded single core ISI marked cable.

Wiring for linear LED fixtures with 2 x 10 mm² and 1 x 1.5 mm sq FRLS PVC insulated copper conductor multi-stranded single core ISI marked cable.

Battery backup : Supply, installation, testing and commissioning of 15 KVA invertor as per requirment & Specifications of SBD

SITC of 12 V, 150 Ah batteries of (As per specifications of the SBD & requirment )

SITC of Capony type rack made from 50 mm MS angle iron and 18 Guage MS Sheets fitted with lockable dust free door-duely painted

SITC of 25 Sq.mm, 4.0 core PVC armoured copper cable to be laid under ground excluding the cost of HDPE pipe. & excavation for main service line.

HDPE pipe 50 mm O/D of staandard make including trench excavation in hard soil 1ft x 2 ft for laying of 25 sq mm almunium armound cable. The job further includes refilling back the same and removal of surplus excavated material to an appropriate place.

Dismantling of divider foot path tiles/chiesled stone for cable laying excavation & other activities relatedto the work & its refixing after completion of work including cost of broken tiles & cement motor or sand so as to bring it in the original shape where ever required.

Sign board of appropriate size painted with details of the work like name of the project , with main features, date of commisioning etc

SITC of LED FIXTURE - Wattage 35-45W Power Module LED, 3000K, Upright, it's upper square frame in single piece made of die cast aluminum using pressure die-casting process,with a decorative element which is also made of die cast aluminium using pressure die-casting process, fixed on the top. Auxiliary and optical compartment can be accessed by tilting the top frame.Bottom frame with Company /brand name engraved in the mold, in single piece, made of die cast aluminum using pressure die-casting process with a four-armed bracket with flange, which is also made of die cast aluminum using pressure die-casting process, fixed at the bottom. Frosted Screen made of polymethylmethacrylate (PMMA) molded in a single piece using Injection molding process. Screen's Impact resistance: IK06.Pure polyester powder coating in Standard Grey Colour. Optical Compartment IP Rating - IP 66. Height – 605mm, Length - 325mm, Width - 325mm,Weight - 6Kg, Area Exposed to Wind(S) - 0.15 m2. Power LED Module with Company /brand name printed on PCB with the metal core plate, in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory should be submitted. LED Chips of CREE/NICHIA make with Individual LED's Minimum Luminous Flux (lm) - 130lm @ 350 mA (@ 85 °C) shall be used- same should be supported by LED manufacturer's tech sheet . Colour Rendering Index: Ra 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection a minimum of 1.5kV (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PC (Polycarbonate), UV Resistant & Shock Resistance-IK10. LM80 Reported LED Lifetime is L90@ 50,000hours minimum & Estimated LED Lifetime is L80 @ 100,000 hours(Ta-25°C) minimum.LM 80 report & TM 21 calculation should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from UL Authorised Laboratory should be submitted) .LM79 report should be submitted from UL Authorised Laboratory. Pole & Fitting should be approved by authority or matched with existing pole.

SITC of ARCHITECTURAL POST TOP POLE :JM.01.20.025 3.5M height Pole made of complete cast iron decorative components where the internal fabricated pole of 3M is Made in combination of mild steel pipe sections 89mm dia., 48mm dia. & covered on the outside by decorative cast iron base and columns. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260mm dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the econerned Engineer the total height of decorative cast iron base is 700mm and Weight - 32kgs. Decorative cast iron base should be provided with a flush door of length 228mm, width 124mm and height 30mm. Decorative cast iron flower starting with a dia 102 mm increasing gradually to 160mm and then tapering to a dia 99mm.Total height of cast iron flower is 304 mm & weight is 6.3kgs.. Decorative cast iron column(3nos.) is of 80mm dia. and having continuous grooves along the height. The height of each pillar is 750mm & weight of each pillar is 9.5kgs. Decorative Cast iron top starting with dia 80mm and a ring of dia 96mm at height of 160mm then gradually increasing to dia 120mm the top half of the decorative top should have grooves of depth 5mm, total height of cast iron top is 334mm - Weight-5.2kg. All cast iron parts weight mentioned are with +/5% tolerance.Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized (60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875 (part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Only cast iron parts outside are PU painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint. Pole & Fitting should be approved by authority.

Supply, installation, testing and commissioning of (Creation of 25 KVA Substation):

SITC of 9 Mtr. Long ST Pole 410 SP 33 as per IS 2713 (part I & II) as per KPDD Specification.

SITC of 50 mm² AB (HT) Cable (3x50 + 1x70 mm²) XLPE(11 kV, 3C + Earth) IS 7098 part II ammended upto date.as per KPDD Specification.

I hook and holding clamp as per KPDD Specification.

SITC of 50 mm² AB Cable 3 core cable termination KIT as per KPDD Specification.

SITC of GI Channel iron 100x50x50x6mm 9' long (02 No.) as per KPDD Specification.

SITC of GI Channel iron 75x40x40x6 mm 8' long (10No.) as per KPDD Specification.

SITC of GI Channel iron 75x40x40x6 mm 6' long (2No.) as per KPDD Specification.

SITC of GI Angle Iron braces 50x50 x6mm 5' long (04 No.) as per KPDD Specification.

SITC of GI Angle Iron braces 50x50 x6mm 6' long (02 No.) as per KPDD Specification.

SITC of GI Nuts & Bolts /washers as per KPDD Specification.

SITC of GI Strip for earthing. as per KPDD Specification.

SITC of 25 KVA Transformer 11kV / 433V 50 Hz 3 Phase with bimettallic terminal connectors Energy level 2 Copper wound IS 1180 Part II with all testing & prior approval.

SITC of 35 mm² PVC 3.5 Core Cable IS 1554 ammended upto date as per KPDD Specification.

Solderless Clamps as per KPDD Specification.

SITC of 11 KV Gang Operating Switch as per KPDD Specification.

SITC of 11 KV Disc insulator with complete fittings as per KPDD Specification.

SITC of Drop-out set (Horn-gap type) as per KPDD Specification.

SITC of 11KV Lighting Arrester Set ( Station type) as per KPDD Specification.

SITC of 11 kV Pin Insulators (polymer/porcelain) with Pins( 5 KN) as per KPDD Specification.

SITC of Danger Plates with Clamps as per KPDD Specification.

SITC of Earthing for Sub-Station (Chemical Earthing) as per KPDD Specification.

SITC of Earthing Bobin insulators with clamps as per KPDD Specification.

SITC of GI Angle Iron for Transformer Belt 50 x 50 x 6 mm 10' longwith two coats of Aluminium as per KPDD Specification.

SITC of Earthing for Poles (Spiral Type) as per KPDD Specification.

SITC of Anti-Climbing Device with Clamps as per KPDD Specification.

SITC of Cement Bottoming of poles 1:2:4 mixture as per standard [0.5 cum per pole] as per KPDD Specification.

SITC of Painting of poles with two coats of aluminium as per KPDD Specification.