Srinagar Smart City Limited Tender

Removing of chain link / knitted wire crates including making rolls and stacking within 50 metres lead

Felling trees of the girth (measured at height of 1 mtr above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material: Beyond 60cm girth upto and including 120cm girth.

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

Providing and laying of stone soling (hand packed) watering, ramming. Complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level, excluding the cost of centring, shuttering and finishing: 1 : 3 : 6 (1 cement 3 coarse sand 6 graded stone aggregate 20mm nommal size

Centering and shuttering including strutting propping etc and removal of form work for: Retatning walls. return walls. walls (any thickness) including attached pilasters. buttresses. plinth and strmg courses fillets etc

Providing and fixing devri stone cladding 25mm thick with exposed face fine dressed & rough on other side backing on plinth wall lining , back filled with a grout of 12mm to 15mm thick cement mortar in 1 :6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1 :2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade.

Stone work plain in copings, cornices, string courses and plinth courses, upto 75mm thick, in cement mortar 1:6 (1 cement : 6 Coarse sand) including pointing with white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade. White sand stone

Tile brick masonry with machine moulded tile bricks of class designation 125 conforming to IS 2690 (Part 1) - 1993 in foundation, plinth upto floor level first in cement mortar 1:6 (1 cement: 6 coarse sand).

Steel work welded in built up sections, M.S. flats, square/angle or round bars etc in ornamental grill / railings including fabrication with hot finished weldding type, hoisting and errection as per approved drawings, fixing in position and applying a coat of approved steel steel primer (two or more coats) complete in all respect.

Providing & laying of 40 mm thick Dense Bituminous concrete with bitumen of 60/70 grade @5.5% & filler (lime) @3% by weight of total mix. on prepared surface with specified graded stone aggregate, hot mixing of bitumen with filler and stone agg. In hot mix plant , transporting the mixed material by tippers to paver and laying the mixed material with sensor paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications to achive the desired density and compaction but excl. the cost of primer/ tack coat. Incl. removal of existing 25 mm semidense coat with mechanical scrapper.

Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/ yellow shade or any other color including cleaning the surface of all dirt, scales, oil, grease and foreign material etc.complete. New work (Two or more coats)

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0. 901itre/10 sqm over an under coat of primer applied @ 0. 801itre/10 sqm of approved brand and manufacture

Supply, Installation, Testing and Commissioning of all in one integrated LED solar street lighting luminaire with housing of Die-cast aluminum, UV stabilized polycarbonate cover, system wattage minimum18W and minimum system lumen output of 3000, 12V DC with system lumen efficacy not less than 175lm/W. Luminaire has Integrated MPPT charger with Driver with charger efficiency 90% and should be available in CCT of 5700K. Luminaire should have highly safe & Advanced long life maintenance free Lithium ferro Phosphate (LiFePO4) battery used for hassle free operations along with inbuilt PIR sensor with dimming profile. Luminaire should be capable of operating at line voltage without any separate power supply from 100-240 V AC. Lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire should be IEC60598-2-3, IEC 62109-1, EN 50530, IEC 61547, CISPR 15, IEC 62133, IEC 61960, UL1642, IEC 61730-1-2, IEC 61215 certified. The complete job should include the concrete base foundation (M20) ,Six meter high (3 inch) GI pipe to be black painted comes along with reducer and nipple required for fixing the solar lighting fixture.LM79,LM80 and TTC certificates to be produced from NABL accredited lab. Mfr: Philips, Wipro, Trilux,Bajaj / Equivalent

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:1.5:3 (1 Cement: 1.5 Coarse sand: 3 graded stone aggregate 20mm nominal size) Crushed

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. Including carriage upto the site. Complete.

Stone work in plain ashlar in super structure upto floor five level in cement mortar 1 :6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1 :2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade: Both faces dressed White sand stone

Stone work plain ashlar in arches in super structure upto floor V level in cement mortar 1:3 (1 cement :3 coarse sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 Stone dust) with an admixture of pigment matching the stone shade:Both faces dressed White Sand stone

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :4 ( 1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including hold fast or dash fasteners in First class deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm thick in First class deodar wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws :lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size First class deodar wood.

Centering and shuttering including strutting, propping etc. and removal of form work for:   Suspended floors, roofs, landings balconies and access platforms

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering, all work upto floor V level

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with complete pigment of matching shade complete. including all Carriages leads lifts and all wastages.

Providing and fixing in position Anti Skid digital floor tiles of approved brand, size, shade (thickness to be specified by the manufactures) of first quality confirming to IS:1375 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent to be laid on 20mm thick bed of cement mortar in 1:4 including filling the joints with white cement mixed with colour pigmentation complete job at site as directed.

Providing and fixing in position digital wall tiles for external cladding of approved brand, size, shade (thickness to be specified by the manufactures) of first quality confirming to IS:1375 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent to be laid on 20mm thick bed of cement mortar in 1:4 including filling the joints with white cement mixed with colour pigmentation complete job at site as directed.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/sqm This layer will be allowed to air cure for 4 hours. b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours . The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Make: Texas, pidilite, or equivalent as per specifications, walls or as specified in the drawings .drawings and directions of selection done by Architect.

Providing and fitting PVC water storage tanks tripple layer of standard mark sintex/star and manufacture including cost of all allied fittings like tank nipple etc. and placing in position complete job.

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including all carriages leads lifts etc.

Providing colour coated G. S. sheet roofing fixed with GI self screws with pvc caps of matching colour design and pattern as per directions of Engineer-in -charge bolts and nuts excluding the cost of purlins,rafters and trusses with 0.50mm thick including carriages all complete.

Providing coloured ridges /hips / soffit of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks , bolts and nuts 8mm dia GI limpet and Bitumen washers complete 0.50 mm thick including carriages Complete

Providing and fixing plained eaves boarding of 2nd class Deodar wood 300x32 mm (nominal size)

Provision for complete electrical, plumbing and sanitary installations including disposal system (to near by existing swerage line) for four number W.C.s and six wash bains, two number electric gysers. Complete job in all respect.

Supply, Installation, Testing and Commissioning of Smart Carts of following specificitaions: Size: - 6’ x 4’ Structure: - Made by M.S. & S.S Exterior Material: - Covered by ACP Color: - ACP Color as per client choice Table Top: - Made by S.S. (Stainless Steel) Dome:-One side slope with storage attached for solar panels Drawer: - 1 Nos Cash Drawer, 1 for carry bags and 1 for other storage Dustbin: - 2 inbuilt dustbin Electrical: - 2 Nos small LED light and two small fans attached with Dome Sides: - 2 side fixed stain-steel/glass on table top (upto 1 ft). Flaps: - 4 side flaps cover open with shocker. 3 side half down for customer. Shelves: - One side 2 nos S.S. shelves (for extra storage). Wheels: - 4 wheels two small (8”OD) and two big (20”OD) Solar Panel: The cost quoted must include the supply and installation of solar panel as per the requirement of the cart supplied with Refrigerator and Carts without Refrigerator.

Cart Description: Size: - 6’ x 4’ Structure: - Made by M.S. & S.S Exterior Material: - Covered by ACP Color: - ACP Color as per client choice Table Top: - Made by S.S. (Stainless Steel) Dome:-One side slope with storage attached for solar panels Drawer: - 1 Nos Cash Drawer, 1 for carry bags and 1 for other storage Dustbin: - 2 inbuilt dustbin Electrical: - 2 Nos small LED light and two small fans attached with Dome Sides :- 2 side fixed stain-steel/glass on table top (upto 1 ft). Flaps: - 4 side flaps cover open with shocker. 3 side half down for customer. Shelves: - One side 2 nos S.S. shelves (for extra storage). Wheels: - 4 wheels two small (8”OD) and two big (20”OD) Cold: - One small refrigerator Solar Panel: The cost quoted must include the supply and installation of solar panel as per the requirement of the cart supplied with Refrigerator and Carts without Refrigerator