Small Scale Industries Development Corporation Limited Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Small Scale Industries Development Corporation Limited - SICOP Tender
Civil And Construction
Eprocure
Opening Date4 Nov 2022
Closing Date25 Nov 2022
Tender AmountRefer Documents
Costs
EMD
₹ 5,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_SICOP_194826_1Bid Award Id
ViewTender No
31 -SICOP (DMM) of 2022-23 Dated 04-11-202Tender Authority
Small Scale Industries Development Corporation Limited ViewPurchaser Address
-Website
http://https://www.jksicop.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Subwoofer : Speaker type : bass reflex , Frequency range (-10dB) : 35Hz-3kHz , Components : 18" cone , Power rating : 1000W , SPL : Sensitivity (1W; 1m on axis) 97dB SPL ,Peak SPL ( 128dB ) Nominal impedance : 8Ω preffered make CIBAS
2
-
-
Delay Speaker ( Left & Right ) : Speaker type : 2-way, Bass-reflex , Frequency range (-10dB) : 51Hz - 20kHz , Nominal coverage : H ( 100 ) X V ( 100 ) , Components : 8" Cone & 1" Soft dome , Power rating : 180W , Nominal impedance: 8Ω/60W (170Ω), 30W (330Ω), 15W (670Ω) , SPL : 117dB SPL preffered make CIBAS
8
-
-
SITC of Amplifier for above speakers
-
-
-
Power Amplifier for Main speaker
2x 1000W at 8Ω ; 2x 1200W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters, delay, and limiter functions;Yamaha Speaker presets ; Utlities for safe and secure operation ; Output power; 1kHz Non-clip 20msec Burst Both channels driven 8Ω ; 1000W x 2 ; 4Ω 1200W x 2 ; 2Ω 700W x 2 preffered make Soundstandard
1
-
-
Power Amplifier for SUbwoofers
2x 800W at 8Ω ; 2x 1050W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters, delay, and limiter functions ; Yamaha Speaker presets ; Utlities for safe and secure operation ; Sampling frequency rate Internal 48kHz ; A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling; Total harmonic distortion 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) ; Frequency response ±1.0dB (1W, 8Ω, 20Hz to 20kHz) preffered make Soundstandard
1
-
-
Power Amplifiers for Surround speakers : 2x 300W at 8Ω ; 2x 500W at 4Ω ; Newly developed Class-D amplifier engine with a custom LSI ; Flexible onboard PEQ, crossover, filters, delay, and limiter functions ; Yamaha Speaker presets ; Utlities for safe and secure operation ; 8Ω/Power Boost Mode 600W x 1 4Ω/Power Boost Mode 1000W x 1; Sampling frequency rate Internal 48kHz ; A/D D/A Converters AD/DA: 24-bit linear, 128 times over sampling preffered make Soundstandard
1
-
-
SITC of Analog Mixing Console: Analog Mixer : 16
Mixing channels 16 Line Inputs (8 mono and 4 stereo) ; GROUP 4 GROUP Buses + ST Bus ; AUX 3 AUX Sends + 2 FX Sends ; MATRIX 1 Matrix out ; On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) Yamaha,
1
-
-
SITC of MICROPHONES Wired & Multi Channel Wireless System
-
-
-
Wired Microphone : Microphone Unit Dynamic ; Polar Pattern Unidirectional ; Frequency Response 40 Hz–15 kHz ; Sensitivity (2.83 V/1 m) -54dB ±3dB (0 dB=1V/Pa at 1 kHz) ; Output Impedance 500 ohms ±30% (at 1 kHz) ; Connector 3 pin XLR-M type ; Cable Φ6mm x 5m cable with XLR-F type connector and 6.3mm plug preffered make Shure
2
-
-
Handheld Wireless Microphone: Professional Handheld Wireless Microphone System with 8 Selectable UHF Channels. The selectable 8 UHF channels ensure flawless and non-interfering performance, along with an exceptionally clear microphone make the BR 28/BM 28 a great value proposition. UHF Band frequency by PLL-Synthesis Technology preffered make Q/One,Nx Audio
1
-
-
Podium Microphone :
Microphone Unit Dynamic ; Polar Pattern Unidirectional ; Frequency Response 40 Hz–15 kHz ; Sensitivity (2.83 V/1 m) -54dB ±3dB (0 dB=1V/Pa at 1 kHz) ; Output Impedance 500 ohms ±30% (at 1 kHz) ; Connector 3 pin XLR-M type ; Cable Φ6mm x 5m cable with XLR-F type connector and 6.3mm plug preffered make Q/One,Nx Audio
2
-
-
Lapel UHF wireless microphone : Professional Lapel UHF wireless microphone technology system engineered for the high quality performance for virtually any application. This Series of UHF wireless system offers unprecedented flexibility & versatility. Superior quality UHF band frequency Wireless Microphone System. 100 UHF selectable channels. preffered make Q/One,Nx Audio
1
-
-
SITC of Miscellaneous Equipments
-
-
-
UL Listed connectors : For inter connection of equipments. preffered make Seetronics, SR or NUTRIK
1
-
-
Microphone stand (big) : Long Stands for microphone preffered make Hercules/GS
2
-
-
Speaker Riging : Speaker Mount Hardware for (Area: Delay Speaker)For Hanging arrangement of Speaker preffered make Customized
8
-
-
Microphone stand (Small) : Long Stands for microphone preffered make Herclues/GS
2
-
-
Speaker Cable for 2.5 Sq. mm 200/40 Subwoofers :
Cable with thickness of 2 Core 2.5 Sqmm.Use for all audio applications with Double Diamond ProtectionHighest quality stranded copper wire for maximum flexibility and covered with a tough PVC jacket to helpprevent chafing,Wire should be designed to maximize sound quality and for better frequency response Cable with thickness of 2 Core 2.5 Sq. mm preffered make AMBYPRO, LOSEN & SUNRISE
100
-
-
Speaker Cable for 1.5 Sq. mm 100/40 Main Speakers : Cable with thickness of 2 Core 1.5 Sqmm.Use for all audio applications with Double Diamond Protection Highest quality stranded copper wire for maximum flexibility and covered with a tough PVC jacket to helpprevent chafing,Wire should be designed to maximize sound quality and for better frequency response
Cable with thickness of 2 Core 1.5 Sq. mm preffered make AMBYPRO, LOSEN & SUNRISE
200
-
-
Microphone Cable : balanced shielded Roll Reel of microphone audio cable, Balanced and shielded with rope braiding to give cable substantial strength while retaining extreme flexibility & Great for building custom length mic cables, custom patch coded or other audio applications that require either a stereo or balanced signal. preffered make LOSEN & SUNRISE
100
-
-
Motorised Stage Curtain & Fabrication
-
-
-
Horizontal MAIN CURTAIN: As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete
The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM made out of, double gathering Velvet, Molfin, Mokel or Hitech Fabric Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.
Height __ft , Length __ft
“Decorative fancy gota embroidered three layer golden border gota Patti on bottom of front Curtain”
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make : Innovative, Response or Nexgen
1
-
-
STAGE FRILLS:
As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete made out of, 450 GSM double gathering glazed Velvet, Molfin, Mokel or Hitech Fabric; to be installed above the stage on 28mm dia GI pipe adjustable at position according to stage positioning plan; Cloth material of desired shade with Stitching.
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser Fabric Make : Innovative, Response or Nexgen BRAND: • Canara • Stage Works • illumitex
1
-
-
Supply, Installation, Laying, Testing & Commissioning of Data Signal Cabling for Remoter Curtains: As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Using 4-core PVC insulated multistranded cable to transmit Signal through curtain drives . high speed data cable designed for EIA485 ; lowcapacitance, twisted pair shielded ; FHDPE insulation, for interlinking splitter to Control Room with required connectors (1 main +1 backup) make: Reputed
1
-
-
Energy Efficent Stage Effect Lighting
-
-
-
MODULAR WIRED FIXED HEAVY-DUTY STAGE LIGHTING BAR SYSTEM MAKES RIGGING LIGHTS QUICK AND EASY WITH POWER OUTLETS BUILT INTO THE BAR FOR LIGHTING APPLICATIONS As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Over Head Light Bar fabricated with Steel Rectangular Tube 4" x 4" x 16 Gauge dia pipe of full length interlocked with 2"inch square pipe lincked with 2"inch round pipe for trussing with adequate clamps, bars can be linked together side by side to form a single rigid bar, bar can be hung from wire ropes, chains or hung from an existing grid this lighting bar painted in side, outside with zinc chromate primer finally coated with black quick drying enamel paint to mounting for stage lighting, which is suspended from bars above the stage to focus/Wash the stage.
2
-
-
Truss FOH “FRONT OF HOUSE” LIGHT BAR As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete
40NB dia pipe of full length trussing with adequate clamps, this lighting bar painted in side, outside with zinc chromate primer finally coated with black quick drying enamel paint required which is suspended from ceiling in front of stage to focus stage. 36ft Length.
1
-
-
54X3W As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete as per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete..: Indoor RGBW slim LED Par, Aluminum Die Cast
16
-
-
200w COB Par LED As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete 1x200W warm white+white 2in1/warm white/white Voltage: AC110- 220V, 50-60HZ Power: 100W/200W Light source: 100W COB/200W COB Color: warm white, white Dimming: 0- 100% Control mode: voice, master and slave, self-propelled, DMX512 Channels: 4 / SCH Working temperature: -30 "C -40 "C +RGB Barndoor Optional
16
-
-
Splitter 8 channel As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete 4/8 independent amplification driver output.The signal amplifying and shaping function, extending the signal transmission distance.To enhance the capacity of data bus access equip men! number. To protect the lighting console DMX512 output interface.fault isolation, improve the safety and reliability of digital lighting.
1
-
-
Computer Light Controller: Supply of Light Controller Computer Light Controlller: Specifications:internal flash drive,Similar in functionaliy to hard disk but fast and more rugged. Enough storage for: the entire fixture library of more them 3000 Files , over a hundard show files. Removable external memoty stick. cache the entire fixture library of more than 3000 files, improved method of fixture selection for patching. New locate fixure button ,Fixture Selects (Selectingthe top row of Fafers).2048 channels. 240 Functions, shape generator for instant creation of patterns and effects. 15 playback masters Controlling 450 memories, Chases or cue lists MIDI and Bass, Mid treble sound to light tiggers. Colour VGA output Fitted as Standard
1
-
-
DMX 3-Pin Male XLR – 3-Pin Female XLR DMX Cable: As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Supply, Installation, Laying, Testing & Commissioning of DMX Data Signal Point Wiring : Using 2-core PVC insulated 22AWG multi-stranded Cu.Cond. high speed data cable designed for EIA485 ; lowcapacitance, twisted pair shielded ; FHDPE insulation - starting from DMX Splitter to each Light Bar - either sides, Side Ladders and Floor Points, as required to be terminated with suitable XLR connectors
32
-
-
Black Steel Hook: G CLAMP As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Strong metal G clamp fitted with protector strip designed for hanging light effects. Fits on bars up to 50mm diameter.
32
-
-
Supply, Installation, Testing & Commissioning of Wiring for Direct As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Points Using PVC Insulated Finolex 1.5 sqmm 3Core FRLS Cu.Cond. cable for 2 sockets/box ; 30 No. Core FRLS Cu.Cond. cable for 2 sockets/box ; starting from the supplied MCB Box/Panel, having 10A SP MCBs, to the Lighting bars/tree or stage points ; terminated at junction box with 2 x SHUCKO 16 Amp. Sockets/per point (all points to be marked & numbered)
32
-
-
PROVIDING AND INSTALLATION OF ACOUSTIC WORK
-
-
-
Acoustic Treatment for Walls and Ceiling: Supply and Fixing ( GI stud channel frame-work
as per design over fixing with backing infill in 75mm thick 64kg/m3 density rock wool insulation padding. With Maximum withstanding temprature 400 Degree.Covering with Acoustical 0.5mm tissue paper & over fixing 15mm
PVC Griper. The installed stretch system should provide NRC of 1.00 fabric colour of approved shade. Work complete in all respect.18x36mm GI stud Channel Frame work as per design. with backing infill 75mm thick 64kg/ m3 density rock wool insulation padding. Overlap 0.8mm thick tissue paper. Work complete in all respect. As Per Design.
2285
-
-
Acustic Woodwool Tiles: Providing & fixing 15 mm thick Cement-bonded wood wool acoustic panels for Auditorium stage side wall in size 1200 x 600mm overlapped with loopily jet black carpet or Spray Painted on stage as per Architectural Drawings, Work will be executed as per the instructions of Engineer-in- charge (EIC)including all tools, tackles, machineries, manpower, staging,any consumables, etc. complete Wood wool panel help to reduces reverberation & observe reflexion on performing stage as per desired finish,Premium Square Edge. Panels are made of Pine Wood fibres containing cellulose bonded with Magnetite. The panels will be screw fixed @ 200mm on GI metal frame of 50 x 50mm making a grid of 610 x 610 mm c/c. The frame is to be made in proper line after levelling. The panels will be backed with 50mm Rockwool of 48 kg/cum inserted inside the grid of 610 x 610 mm which will comprise of minimum NRC 0.90, Panels shall be overlaped with Black carpet or it can be spray painted with choice colour for final finish * Stage ceiling- * Stage Side Walls (Right & Left) & Rear Wall - 2400 Sq/ft. Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge or Project Officer.
107
-
-
Supply and fixing on site, the front of stage Procenium: To be fabricated on site out of tubular framework of MS Tubes section 25x25mm thick 3.2mm square at 600mm c/c bothways; fixing on 12mm ISI mark ply finishing 5.5mm Jali Work. Fixing with Fevicol adhesive & with Acrylic Sheets 3 mm as per approved design.
85
-
-
PROVIDING AND INSTALLATION OF ACOUSTIC DOORS Supply and Fixing on site 75mm thick acoustic sound reducing doors (with accessories) DOOR FRAME: - Door frame made out of Deodar Wood, section size: -120x90mm with double rebate fitted with ‘D’ type rubber gasket to block noise leakage from gap. DOOR SHUTTER: - A) 75 MM thick made from Superior quality ply & wooden batten, processed with environmentally, Friendly adhesive with Advanced Technology and Modern Techniques. B) This Composite is generally made of 12 MM thick commercial/BWP ply board at both side and 50 mm thick noise absorbing and dampening material filled in between both the ply Acoustic Material having a high Physical. Mechanical, Chemical Properties and stability. Total thickness of door shutter will be 75 MM. C) 3 mm sheet rubber interlayer and finished 01mm mica laminate shall be bonded with 12 mm thick non-Combustions board on both face of shutter by using high strength cross linked PVAC based adhesive ‘Korlok 472’ of National or “Fevicol SWR” of Pidilite industries ltd as per manufacturer’s specifications. D) The frame of shutter shall be made from hard wood stiles and top & bottom rails of size 94 mm and core made of lock rail 100 mm wide and 50 mm thick and three additional strips 50 mm wide and 25 mm thick (minimum). (E) The core of door shutter shall be filled with resin bonded glass wool conforming to IS:8193/ relevant International Standards (Twiga Insul -4000/50 mm or equivalent) of a minimum density of 48 kg/m3 50 mm thick. (F) Dorp Down seal comes at the bottom of the Door Shutter. (G) The door assembly shall be fixed to the door frame with heavy duty hardware i.e., G e z e /Assa Abloy/ Carbon Make or equivalent make SS Hinge Size: 4”x 3”x 3mm, 1200 mm SS door handle (Double Leaf Door), SS Tower bolt, and Mortise door lock (Single Leaf Door)
50
-
-
SUPPLY OF Khatambandi P/Fixing of heritage Ceiling (Khatambandi) made up of Budloo Wood. Base will be fixed on 12 mm ply board and with backing in fill in 48 mm thick 40kg/m3 density rock wool insulation padding. P/Fixing of GI frames Size: including cost of hardware (ornamental type) channels of thickness 0.45mm (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall partition with the help of nylon sleeves and screws, at 610mm centres Complete job
1269
-
-
SUPPLY OF Pinjra Kari Work : P/F of Pinjara Panels Persian Design made up of Deodar Wood with both faces having grooves horizontally & vertically with different pattern P/Fixing of ornamental cornice of 40mm x 40mm section fixed to the Pinjra panels on both sides of frames including cost of hardware including cost of necessary hardware channels of thickness 0.45mm (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending Gypframe intermediate channels 0.7mmthickness & size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle(0.45mm) of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners(Mtg by Saint Gobain Gyproc). Then Gyptrame Ceiling section (0.45mm ) of having web of 51.5mm Complete Job
1017
-
-
Polishing: Melamine polish work: consist thin resin that forms a thin film like coating when applied on wood surface. Melamine polish is a closed pore polish i.e. it makes the wood non-breathable product that protects wood from mainly hot and cold surfaces placed over it with paint complete Job
2335
-
-
AUDITORIUM CHAIR WITH WRITING PAD AND WOODEN ARMREST Back & Seat Sponge: High density PU, Molded by cold foaming. Back Cushion: High Density PU Density is 50 KGS/m3 Seat Cushion: High Density PU Density is 50 Kgs/m3 Back & Seat Cover: Premium deformation resistant high density hard plywood, high-standard treatment process. Fabric: Stain and discoloration resistant premium fabric. Leg: Made from top quality steel after precise pressing and welding, and gone through procedures of polishing, anti rusting, phosphing phosphing, spraying and powder coating with PP side pads by injection molding in one time. Size 80x40 mm (L*W) Foot: Thickness is 2.0 mm 310*60 (W*L) Armrest Cover: Imported timber externally applied with polyester coating Size 410*80 mm thickness 25 cm Writing Pad: MDF size 290x240x20 mm (W*L*H) Cushion Recovery: Spring plus damping for flexible recovery and free from noise Screws: Steel Hexagone socket cap screws and expanding nut Production process and quality recruitments: According to the national standard ''metal furnitue general techical conditions" (GB/T3 325-1995) production, all kinds of steel skelton of pickling on the surface, caustic wash oil removal, phosphating dring technology, such as using electrostatic powder coating (matte black). All welding points are straight strong no welding defects welding bumish is flat and level flat component parts namely the lap vertically socket fairing reliable and stable. Standard: BIFMA Certified Make: Greenscape, Goodrej & Wipro
1017
-
-
SUPPLY OF WOODEN FLOORING Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
258
-
-
SUPPLY OF AUDITORIUM CARPET Providing & Fixing of Flocked floor covering rolls or equivalent having a density of 70 million fires of nylon 6.6 per M2, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic certified by British allergy foundation, anti static, thickness 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The reaction to fire should be as per EN 13501-1: Bfl-s1. shade as approved by client and installed by approved applicator of manufacturer.Flocked flooring should be installed over cement base and use of high grade SR and pasting of 10mm Foam including installation complete job
1017
-
-
STAGE FURNISHING:
-
-
-
HORIZONTAL MAIN CURTAIN: 48'*24' As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM Flame Shield is a special chemical formulation Industries Inc., USA to provide fire retardant protection. It also holds certification from State Fire Marshal, California and City of New York. Flame Shield has been approved by the Government of the City of New York through the Bureau of Standard and Appeals under Colander Number 141-89- SM. Flame shield treated fabric is also geared to pass ASTM – E 84, NFPA-701 (not 100% nylon), EM 13501-1 and BS 5852 tests. All above tests are class A and considered to be toughest. The treated fabric would decompose under the influence of the flame forming a strong localized ‘char’ with no afterglow or no spread of flame outside the charred area. Flame Retardancy treatment will remain effective till it is washed irrespective of number of years (can withstand up to three dry-cleanings). Duration of flame resistance: Fire time – one hour for heat up to – 1000 degree centigrade. With Flame Retardant Treatment Certificatespecification ), double gathering every 4inch Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.“Decorative fancy gota embroidered three layer golden border gota Patti on bottom of front Curtain” FABRIC SPECIFICATION : 450 GSM FIRE RETARDANT & 4" GATHERING. FABRIC MAKE :RAYMONDS, RELIANCE & INNOVATIVE
1
-
-
HORIZONTAL CENTRE CURTAIN: 48'*24' As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM Flame Shield is a special chemical formulation Industries Inc., USA to provide fire retardant protection. It also holds certification from State Fire Marshal, California and City of New York. Flame Shield has been approved by the Government of the City of New York through the Bureau of Standard and Appeals under Colander Number 141-89- SM. Flame shield treated fabric is also geared to pass ASTM – E 84, NFPA-701 (not 100% nylon), EM 13501-1 and BS 5852 tests. All above tests are class A and considered to be toughest. The treated fabric would decompose under the influence of the flame forming a strong localized ‘char’ with no afterglow or no spread of flame outside the charred area. Flame Retardancy treatment will remain effective till it is washed irrespective of number of years (can withstand up to three dry-cleanings). Duration of flame resistance: Fire time – one hour for heat up to – 1000 degree centigrade. With Flame Retardant Treatment Certificatespecification ), double gathering every 4inch Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.“Decorative fancy gota embroidered three layer golden border gota Patti on bottom of front Curtain” FABRIC SPECIFICATION : 450 GSM FIRE RETARDANT & 4" GATHERING. FABRIC MAKE :RAYMONDS, RELIANCE & INNOVATIVE
1
-
-
HORIZONTAL REAR CURTAIN: 48'-00*24-00'' As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM Flame Shield is a special chemical formulation Industries Inc., USA to provide fire retardant protection. It also holds certification from State Fire Marshal, California and City of New York. Flame Shield has been approved by the Government of the City of New York through the Bureau of Standard and Appeals under Colander Number 141-89- SM. Flame shield treated fabric is also geared to pass ASTM – E 84, NFPA-701 (not 100% nylon), EM 13501-1 and BS 5852 tests. All above tests are class A and considered to be toughest. The treated fabric would decompose under the influence of the flame forming a strong localized ‘char’ with no afterglow or no spread of flame outside the charred area. Flame Retardancy treatment will remain effective till it is washed irrespective of number of years (can withstand up to three dry-cleanings). Duration of flame resistance: Fire time – one hour for heat up to – 1000 degree centigrade. With Flame Retardant Treatment Certificatespecification ), double gathering every 4inch Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.“Decorative fancy gota embroidered three layer golden border gota Patti on bottom
of front Curtain”
FABRIC SPECIFICATION : 450 GSM FIRE RETARDANT & 4" GATHERING.
FABRIC MAKE :RAYMONDS, RELIANCE & INNOVATIVE
1
-
-
STAGE FRILLS: 3'-00''*52'-00'' As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete made out of, 450 GSM double gathering glazed Velvet, Molfin, Mokel or Hitech Fabric; to be installed above the stage on 28mm dia GI pipe adjustable at position according to stage positioning plan; Cloth material of desired shade with Stitching. Flame Shield is a special chemical formulation Industries Inc., USA to provide fire retardant protection. It also holds certification from State Fire Marshal, California and City of New York. Flame Shield has been approved by the Government of the City of New York through the Bureau of Standard and Appeals under Colander Number 141-89- SM. Flame shield treated fabric is also geared to pass ASTM – E 84, NFPA-701 (not 100% nylon), EM 13501-1 and BS 5852 tests.
All above tests are class A and considered to be toughest. The treated fabric would decompose under the influence of the flame forming a strong localized ‘char’ with no afterglow or no spread of flame outside the charred area. Flame Retardancy treatment will remain effective till it is washed irrespective of number of years (can withstand up to three dry-cleanings). Duration of flame resistance: Fire time – one hour for heat up to – 1000 degree centigrade. With Flame Retardant Treatment Certificate FABRIC Thickness : 450 GSM Fire Retardant FABRIC SPECIFICATION : VELVET, Shade and fabric approved by Engineer in Charge or enduser Fabric Make :RAYMONDS, RELIANCE & INNOVATIVE
4
-
-
STAGE WINGS: 4'-00''*20'-00'' As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Providing and fixing of cloth wings made out of black glazed 450 GSM Velvet, Molfin, Mokel or Hitech fabric fixed on 32mm Pivoted Rotatable Bar Fixed with thick commercial plywood fixed on one side of Frame work with sliding assembly on top supported from ecisting structure & wheels on bottom for free movement.
Flame Shield is a special chemical formulation Industries Inc., USA to provide fire retardant protection. It also holds certification from State Fire Marshal, California and City of New York. Flame Shield has been approved by the Government of the City of New York through the Bureau of Standard and Appeals under Colander Number 141-89- SM. Flame shield treated fabric is also geared to pass ASTM – E 84,
NFPA-701 (not 100% nylon), EM 13501-1 and BS 5852 tests. All above tests are class A and considered to be toughest. The treated fabric would decompose under the influence of the flame forming a strong localized ‘char’ with no afterglow or no spread of flame outside the charred area. Flame Retardancy treatment will remain effective till it is washed irrespective of number of years (can withstand up to three dry-cleanings). Duration of flame resistance: Fire time – one hour for heat up to – 1000 degree centigrade. With Flame Retardant Treatment Certificate Wings Thickness : 4 to 5 inch thick , FABRIC Thickness : 450 GSM Fire Retardant FABRIC SPECIFICATION : VELVET, Shade and fabric approved by Engineer in Charge or enduser Fabric Make :RAYMONDS, RELIANCE & INNOVATIVE
6
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
11200
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type for (cat walk)
1050
-
-
Power High Gain Cinema Works Matt White Projector Screen : Providing & Fixing of Stage Cyclorama 40' x 24' Triangle Ms Pipe Frame Made Out Of 25 To 32 Mm Die Fix Frame Overlapped With 1.8 Power High Gain Cinema Works Matt White Projector Screen Onsite fabricated Triangle Cyclorama Frama As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete triangular truss onsite manufactured with a structural MS Frame as per detailed drawings and fixing details from floor, rear wall and ceiling with fasteners to gain the extreme strength that contains a high amount of manganese in order to control grain structure, resulting in a stronger design. The structure is artificially aged, and provides excellent corrosion resistance. Although the surface finish is not as smooth as similar truss, Triangle frame is favoured in the entertainment industry for its superior strength and durability which provides a safer stage and working environment to match visibelty angles and enhancement of Stage effect lighting overlapped with Grandview high-gain matt white screen duly stretched on large tubular MS pipe frame made out of 25 to 32 mm die fix frame for projection screen: Cyclorama Screen that is manufactured using quality assured raw components and advanced technologies. Hi-Gain Cyclorama screen has been installed for Slide / film projection in a multipurpose auditorium, besides using it as colour wash or for pattern projection for stage performance. Cyclorama lights are directed to fall on this screen to colour wash it from top as well as Moving Heads installed on the First Intelligent Bar provide infinite pattern and depth to the screen. High-gain front projection screen with four inch black masking studs on all sides. HD fabric Material is designed for DLP and LCD Cinema Projectors. This surface is the best choice when using a low contrast ratio projectors with a high definition video source. High Contrast is perfect for use in HD Cinema applications Screen Surface is safely washable with mild soap and water..
1
-
-
Cable Trays: As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Cable trays of size 4”x2”- 16 gauge sheet CRC, for wiring of stage lights & sound system and enrooted to control room.
100
-
-
Catwalk: A bridge fabricated from structural steel of 2.5”width and length according to the Auditorium for holding stage lights in front of stage, approach to cat walk is given from sides with help of ladder, lighting bar is fixed on the cat walk to hold the stage light and give focus on centre of stage, made from Plywood. Steel work inbuit up tubular (round,square or rectangular hollow tubes etc) trusses etc.,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, incluindg welding and boldted with special shaped washers etc complete. HOt finished welded type tubes
1400
-
-
Supply of Stage Furniture
-
-
-
Table should be of size 1200 mm Width × 600 Greensc mm Depth x 750 mm Height. The table top should be 25 mm thick MFC (Melamine Faced Chipboard). Also, there should be 30 mm MDF (Medium density fiberboard) black pad. The modesty panel should be of 18 mm thick MFC. The leg of the main desk should be 25 mm MFC plus 30 mm MDF right and left pad. The main table should be of duck noise profile edge in order to enhance the workspace aesthetics. The maestro joining table RHS should be of size 1200mm Width x 1050 mm Depth x 750 mm Height. The top panel should be 25 mm thick with MFC. The leg of the joining table should be of metal Polyurethane Coated joining table. The Maestro Mobile Pedestal size should be 400 mm Width x 560 mm Depth x 560 mm Height. The top panel should be 25 mm thick MFC plus all the other panels should be 18 mm thick coated with MFC. In Mobile pedestal all other panels should be of 18 mm thick MFC. In Mobile pedestal lock and Castors should be Provided. The handle should be of Metal. The maestro return desk size should be 1200 mm width x 600 mm Depth x 730 mm Height. The top panel should 25 mm thick MFC. The Modesty panel should be 18 mm thick MFC coated. The leg of the return desk should be 25 mm thick MFC plus the right and left pad to be 30 mm thick MDF coated.
8
-
-
Digital Podium: Compact, versatile and easy-to-assemble wireless Lectern Amplifier with built in 40W amplifier.Contains a built-in speaker system consisting of 3nos. 6.5” (165mm) coated dual cone speakers. Provision given for connecting external speaker, if required.Supplied with a detachable gooseneck condenser microphone and a reading light for the podium top.Contains a built-in VHF wireless diversity receiver. High quality VHF handheld wireless transmitter supplied. (Available in different frequencies).Provision for connecting a wired microphone through a 6.3mm phone jack or a line source through an XLR connector.Handheld wireless transmitter & gooseneck podium microphone have voice priority over all other inputs. This feature can be switched ON or OFF through a slide switch.Built in digital recorder cum MP3 player, which can record on USB pen drives or SD cards.Facility for connecting a stereo auxiliary source through L&R RCA plug. It accepts four different sensitivities of auxiliary signal which are selectable through a slide switch.Seperate output connectors for LINE OUT & REC OUT through mini male XLR & 6.3mm phone socket respectively, allowing the lectern system to be connected to external amplifiers for further amplification, if required.Tonal adjustment can be done through cut-boost type Bass & Treble controls.Rugged & stable floor standing base. Can be fixed to the floor with brackets (provided), if required.Operates on 240V 50Hz mains supply.
2
-
-
Wooden Chairs Maharaj Type High Back Made up of Sesam wood Duly Polished. Seat and back pasted with 32 density foam with covering of upholistry of fire retardent approved as per engineer-in-charge size of chair: back: 540 mm x 635 mm seat: 540 mm x 540 mm overall height of chair: 635mm
16
-
-
Conference Hall
-
-
-
Conference table 40'-00''*10'-00''* having different basic modules with top made of 35 mm thick high quality medium density MDF/particle board faced with 0.8mm thick lamnate for scratch resistant with 300 mm gap in center duly covered and having provisions for wires (Wire manager). All exposed edges to be covered by 2 mm thick edge banding glued with hotl melt EVA glue. The vertical members of conference table made of 25 mm thick pre laminated MDF/Particle board and modesty of 25 mm thick pre laminated MDF/Particle board. All panels are interconnected with rastex, dowels and sockets.
48
-
-
Executive Revolving chair 360 o revolving chair with leatherette upholestery overall dimensions width 550 mm Depth-500 mm Height 1100mm high back chair with gas lifter wooden arm rest wooden pedestal base of size 710 m. seat is made up of 15 mm thick plywood tilt tension adjustment single point control 4 position locking system with anti shock feature
4
-
-
Non Revolving Chair Ergonomically designed with leatherette upholestery soft cushioned powder coated frame made in combination of round pipe with P.U upholested handle. High density cushion on seat and back fitted on 15 mm thick steam pressed moulded ply. overall height of chair is overall chair height 1100 mm width 550 mm Depth 500 mm
84
-
-
Acoustic Treatment for Walls and Ceiling: Supply and Fixing ( GI stud channel frame-work
as per design over fixing with backing infill in 75mm thick 64kg/m3 density rock wool insulation padding. With Maximum withstanding temprature 400 Degree.Covering with Acoustical 0.5mm tissue paper & over fixing 15mm PVC Griper. The installed stretch system should provide NRC of 1.00 fabric colour of approved shade. Work complete in all respect. 48x36mm GI stud Channel Frame work as per design. with backing infill 75mm thick 64kg/ m3 density rock wool insulation padding. Overlap 0.8mm thick tissue paper. Work complete in all respect. As Per Design.
246
-
-
Supply, Installation, Laying, Testing & Commissioning of Motorized Screen 2400MM x 2400 MM WITH SILVER PASIV FABRIC AND REMOTE CONTROL SYSTEM SIZE-240"DIAGONAL (2400 MM X 2400 MM) Screen is designed to be clever to make your installation easy, like always the screen has multiple mounting points and can be mounted on the wall or ceiling. The Grandview Smart-Screen is designed to be clever to make your installation easy. Like always the screen has multiple mounting points and can be mounted on the wall or ceiling. Features: As standard is supplied with IR Remote, 12V Trigger, Close Contact and a manual override switch. Simple mechanical limit setting adjustmentsvia the motor. Install is simplified with multi fit brackets that can be installedanywhere along the length of the casing allowing for mounting to wall stud positions. Brackets suit wall, ceiling or suspended installation. Projection surface is Plana R. Casing is extruded aluminium, finished in white. 12 V Trigger Using 1.5mm output on screen and 3.5 on the projector end. Make: Prima/ Seemax
1
-
-
Wiring for the following light points & exhaust fan points with 1.5 Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole switch of approved quality in modular grid plate and GI box and Earthing of fixtures and the outlet box with 1.5 sqmm PVC insulated copper wire. One light controlled by 6 Amp Switch
1
-
-
Wiring for 240 volts single phase and neutral 16 amps switched socket outlet with 4 sqmm PVC insulated copper wire in concealed or surfaced mounted PVC conduit including providing and fixing of 16 amp 3-pin switched socket of approved make with modular grid plate and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire up to the DB (complete as required).
1
-
-
Wiring for ceiling fan /wall fan point same as above at Sr.No.1 but controlled by electronic stepped regulator and 6 amp control switch.
1
-
-
Wiring for 230 VAC, 5-pin 3x 6 amps socket outlets for light duty power with 230 VAC 5/6 amps, SP switch, on same modular grid plate mounting with 2x1.5sqmm PVC insulate copper wire of approved make with modular grid plates and Earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire up to the DB (Complete as required).
1
-
-
Wiring for 230 VAC, 5pin 6 amps socket outlets for light duty power with 2x1.5 sqmm PVC insulate copper wire of approved make with modular grid plates and Earthing the third pin of socket outlet with 1.5 sqmm PVC insulated copper wire, loop point (Complete as required).
1
-
-
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing of 6 amp modular switch, connection, painting etc. as required.
1
-
-
Wiring for Light/ Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in existing surface/ Recessed medium class PVC Conduit along with 1 No. 4 sqmm FRLS PVC Insulated copper conductor single core cable for loop and Earthing as required.
1
-
-
Wiring for Light /Power Plug with 2 x 2.5 sq.mm FRLS PVC Insulated Copper Conductor single core cable in existing surface/ Recessed medium class PVC Conduit along with 1 No. 2.5 sqmm FRLS PVC Insulated copper conductor single core cable for loop and Earthing as required.
1
-
-
Wiring for Circuit/ Sub main Wiring along with earth Wire with the following Sizes of FR PVC insulated copper conductor, single core Cable in existing surface/ Recessed medium class PVC conduit as required. 2x1.5 sqmm + 1x1 sqmm Earth Wire
-
-
-
2x2.5 sqmm + 1x2.5 sqmm Earth Wire
1
-
-
2x4 sqmm + 1x2.5 sqmm Earth Wire
1
-
-
2x6 sqmm + 1x2.5 sqmm Earth Wire
1
-
-
2x10 sqmm + 1x6 sqmm Earth Wire
1
-
-
4x4 sqmm + 2x2.5 sqmm Earth Wire
1
-
-
4x6 sqmm + 2x2.5 sqmm Earth Wire
1
-
-
4x10 sqmm + 2x6 sqmm Earth Wire
1
-
-
4x16.0 sqmm + 2x6.0 sqmm Earth Wire
1
-
-
Supplying and Fixing of suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 6/10 amps modular socket outlet and 6/10 amps modular switch, connection, painting etc. as required.
1
-
-
Supplying and fixing of suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing of 3x6 pin 6/10 amps modular socket outlet and 6/10 amps modular switch, connection, painting etc. as required.
1
-
-
Supplying and fixing of modular blanking plate on the existing modular plate and switch box excluding modular plate as required.
1
-
-
Supplying and fixing of suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 16/20 amps modular socket outlet and 16/20 amps modular switch, connection, painting etc. as required.
1
-
-
Supplying and Fixing of suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing of 6 pin 32 amps modular socket outlet and 32 amps modular switch, connection, painting etc. as required.
1
-
-
Supplying and fixing of the following Prewired TP&N PPI Distribution Board of Sheet Steel for 415 Volts on surface/ Recess complete with Ready to use DBs - Provided with 100A insulated phase bus-bars, neutral bar/s with shroud/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels. The D.B should be IK-09 Compliant. (The Cost of D.B is without MCB's) (IP Rating-43) reputed make
-
-
-
4-Way (8 Module Incomer), (2+2+2 incomer DP RCCB), (4+4+4) SP MCB's O/G's)
1
-
-
6-Way (8 Module Incomer), (2+2+2 incomer DP RCCB), (6+6+6) SP MCB's O/G's)
1
-
-
8- Way (8 Module Incomer), (2+2+2 incomer DP RCCB), (8+8+8 ) SP MCB's O/G's)
1
-
-
12-Way (8 Module Incomer),(2+2+2 incomer DP RCCB), (12+12+12 ) SP MCB's O/G's)
1
-
-
Supply, transportation, Unloading, installation, testing & Commissioning of the following rating of UPS System (IGBT Based) including unloading, transportation from store to site, erection insulation, testing of UPS System including Battery and Battery rack erection & Installation under the supervision of supplier of UPS. Note:- Contractor has to submit the drawings & battery selection detail before procurement. Specification of UPS system shall be provided with Static by pass and Maintenance by pass facility with distribution board
-
-
-
60 KVA (input 3 phase 4 wire & output 3 phase 4 wire with backup of 30 min).
1
-
-
70 KVA (input 3 phase 4 wire & output 3 phase 4 wire with backup of 30 min).
1
-
-
80 KVA (input 3 phase 4 wire & output 3 phase 4 wire with backup of 30 min).
1
-
-
90 KVA (input 3 phase 4 wire & output 3 phase 4 wire with backup of 30 min).
1
-
-
100 KVA (input 3 phase 4 wire & output 3 phase 4 wire with backup of 30 min).
1
-
-
Supplying, Installation, Testing and Commissioning of 4-Pole, 415V, MCB in the existing MCB DB With Connections Testing and Commissioning etc. as required.
-
-
-
40-63 Amps
1
-
-
25-32 Amps
1
-
-
Supplying, Installation, Testing and Commissioning of D.P Pole 220V, MCB in the existing MCB DB with Connections Testing and Commissioning etc. as required:
-
-
-
25 Amps
1
-
-
32 Amps
1
-
-
40 Amps
1
-
-
63 Amps
1
-
-
100 Amps
1
-
-
Supplying and fixing of 5 amps. to 32 amps. Rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole 6-32 amp
1
-
-
Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required (reputed make)
1
-
-
Supplying, Installation, Testing and Commissioning of pre-wired Surface Mounted LED Ceiling 4 ft. Fitting including connections with 1.5 sqmm FR PVC insulated copper conductor single core cable and Earthing etc. as required.
1
-
-
Supplying, Installation, Testing and Commissioning of pre-wired Surface Mounted LED Ceiling 2 ft. Fitting including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and Earthing etc. as required.
1
-
-
Supplying, Installation, Testing and Commissioning of pre-wired Recess Mounted LED 2 x 2 Panel Ceiling Light including connections with 1.5 sq.mm FR PVC insulated copper conductor single core cable and Earthing etc. as required.
1
-
-
Supplying, Installation, Testing and Commissioning of pre-wired Recess or surfaced Mounted LED Ceiling Light including connections with 1.5 sqmm FR PVC insulated copper conductor single core cable and Earthing etc. as required. 6 watt led light
-
-
-
9 watt led light
1
-
-
10 watt led light
1
-
-
12 watt led light
1
-
-
15 watt led light
1
-
-
18 watt led light
1
-
-
18 watt 1’x1’ led light
1
-
-
Supplying, Installation, Testing and Commissioning of AC 230/250 Volts, 50 Hz exhaust fan with louvers of the following sizes including connection etc. complete as required.
-
-
-
300 mm
1
-
-
200 mm
1
-
-
Supplying installation testing and commissioning of pre wired celling fan complete with connection as required
1
-
-
Supplying installation testing and commissioning of pre wired ornamental celling fan complete with connection as required.
1
-
-
Supply & Laying of Following size dia PVC Conduit including cost of Junction Box’s, bends, elbows, sockets, tees etc. laying slab cutting, chases and making good or surface mounted including all fixing hardware as required.
-
-
-
25mm dia
1
-
-
32mm dia
1
-
-
40mm dia
1
-
-
Supplying and laying of the following 1100 volt grade XLPE insulated PVC sheeted Aluminum conductor Armoured cable as per specification in existing trenches cable trays ducts over bed of sand connecting testing and commissioning complete as required
-
-
-
Single core 16 sqmm.
1
-
-
Single core 25 sqmm
1
-
-
Single core 35 sqmm
1
-
-
Single core 50 sqmm
1
-
-
Single core 70 sqmm
1
-
-
Single core 95 sqmm
1
-
-
Single core 120 sqmm
1
-
-
Single core 150 sqmm
1
-
-
Single core 185 sqmm
1
-
-
Single core 240 sqmm
1
-
-
Single core 300 sqmm
1
-
-
2 core 10 sqmm
1
-
-
2 core 16 sqmm
1
-
-
2 core 25 sqmm
1
-
-
2 core 35 sqmm
1
-
-
2 core 50 sqmm
1
-
-
2 core 70 sqmm
1
-
-
2 core 95 sqmm
1
-
-
2 core 120 sqmm
1
-
-
2 core 150 sqmm
1
-
-
2 core 185 sqmm
1
-
-
2 core 240 sqmm
1
-
-
2 core 300 sqmm
1
-
-
3 core 10 sqmm
1
-
-
3 core 16 sqmm
1
-
-
3 core 25 sqmm
1
-
-
3 core 35 sqmm
1
-
-
3core 50 sqmm
1
-
-
3 core 70 sqmm
1
-
-
3 core 95 sqmm
1
-
-
3 core 120 sqmm
1
-
-
3 core 150 sqmm
1
-
-
3 core 185 sqmm
1
-
-
3 core 240 sqmm
1
-
-
3 core 300 sqmm
1
-
-
4 core 10 sqmm
1
-
-
4 core 16 sqmm
1
-
-
3.5 core 25 sqmm
1
-
-
3.5 core 35 sqmm
1
-
-
3.5 core 50 sqmm
1
-
-
3.5 core 70 sqmm
1
-
-
3.5 core 95 sqmm
1
-
-
3.5 core 120 sqmm
1
-
-
3.5 core 150 sqmm
1
-
-
3.5 core 185 sqmm
1
-
-
3.5 core 240 sqmm
1
-
-
3.5 core 300 sqmm
1
-
-
Supplying and Installing of the following Size of Perforated Hot Dipped Galvanized Cable Tray with Perforation not more than 17.5% in convenient Sections ,joined with connectors ,suspended from the Ceiling including bolts and Nuts ,etc. as required.
-
-
-
100mm (W) x 50 mm (H) wide cable tray perforated type
1
-
-
200mm (W) x 50 mm (H) wide cable tray perforated type
1
-
-
300mm (W) x 50 mm (H) wide cable tray perforated type
1
-
-
450mm (W) x 50 mm (H) wide cable tray perforated type
1
-
-
600mm (W) x 100 mm (H) wide cable tray perforated type
1
-
-
750mm (W) x 100 mm (H) wide cable tray Ladder type
1
-
-
Providing of the following size of Under Floor Trucking and POP Up Boxes (Make: Honeywell) of the following items including accessories as required.
-
-
-
M Track 300 mm x 38 mm x 1.6 mm- 3 compartment
1
-
-
Cross over 300mm x 300 mm x 60 mm-75 mm 3 comp.
1
-
-
Access Outlet 300 x 300 x 60-75mm 3 comp.
1
-
-
Dusking Module 8M
1
-
-
Supplying installation testing and commissioning of Microprocessor Based MCCB 125 Amps 4-P with Breaking Capacity 36 KA (Icu=Ics=100%)
1
-
-
Microprocessor Based MCCB 100 Amps 4 P with Breaking Capacity 36 KA (Icu=Ics=100%)
1
-
-
Supplying installation testing and commissioning of Air circuit Breaker 800A 4P 50ka EDO Type microprocessor Release based
1
-
-
Supplying installation testing and commissioning of Microprocessor Based MCCB 400 Amps 4-P with Breaking Capacity 36 KA (Icu=Ics=100%)
1
-
-
Supplying installation testing and commissioning of MCCB 100 Amps 4-P Motorized with Breaking Capacity 50KA (Icu=Ics=100%)
1
-
-
Supplying installation testing and commissioning of MCCB 630 Amps 4-P Motorized with Breaking Capacity 50KA (Icu=Ics=100%)
1
-
-
Providing and Fixing 25 mm x 5 mm Copper Strip in 40 mm dia. G.I Pipe FRL Earth Electrode including connection with Brass nut ,bolt,spring,washer,excavation and refilling etc. as required.
1
-
-
Design, fabrication, assembling, supply, installation, testing, and commissioning of LT sub main panel for air conditioner (indoor type) suitable for 415 V 3 phase 4 wire power supply system panel shall be fabricated out of 1.6mm thick CRC sheet powder coated free stand, having front doors mounted on angle iron pedestal and necessary wiring and other penal accessories comprising of the following Incomers
a) 250 amp 4pole 36ka MCCB b) Spreaders links & phase barriers
c) 250 amp TPN Alu BAS BAR
d) Digital multifunction meter
e) CT’s coils
f) Indication lamps
Outgoings
g) 63 amp DP 6 no’s h) 32 amp TPN 26 no’s
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements