Small Scale Industries Development Corporation Limited Tender

M.S. Grill of required pattern as per design Square Bar Type

Angle iron fencing posts and flat strips mademof standard angle sections, cut and bend at bottom with holes drilled and top bent, duly red oxide painted (For fencing purposes)

Flat iron strips made of standard sections duly cut and holes drilled, complete with red oxide paint. (For fencing purposes)

Rolling Shutter made from HR/BP Sheet 22g

.80mm) strip width 4.5" (including bend) with side channels of 14g sheet, bracket 14g, lifting pipe 1.5" dia 12g, lock plates 6"-14g, assembly complete with red oxide priming.

Fitting, fixing

SIGN BOARDS Supply of sign boards made out of ISA 50x50x6mm legs and frame with M.S. Flat 40x5mm on CR Sheet 22 guage duly welded and fitted with nuts bolts wherever required incl. cost of painting and letter writing as per sizeof department. (as per requirement)

SIGN BOARDS Supply of sign boards made out of ISA 50x50x6mm legs and frame with M.S. Flat 40x5mm on CR Sheet 22 guage duly welded and fitted with nuts bolts wherever required without painting and writing as per sizeof department. (as per requirement)

Steel sign boards made out of 2" dia MS Pipe frame over legs with 16g CR Sheets fitted with M.S. Flat clips 40x5mm with pipe frame and MS plate 4"x4" at the bottom of the legs duly painted and lettering complete.

Steel sign boards made out of 2" dia MS Pipe frame over legs with 16g CR Sheets fitted with M.S. Flat clips 40x5mm with pipe frame and MS plate 4"x4" at the bottom of the legs without painting and writing

IRON NOTICE BOARD SIZE 6’X3’ Iron Notice Board size 6’x3’ frame made of angle Iron 50x50x6mm fixed with MS Sheet 0.80mm, front Side covered with doors of iron jail, with locking facility Board having legs of angle iron.

IRON NOTICE BOARD SIZE 4’X2.5’ Iron Notice Board size 4’x2.5’ frame made of anglre Iron 32x32x5mm fixed with MS sheet 0.80mm, front Side covered with doors of angle jail, with locking facility Board having provision to be mounted on wall

IRON GATES Iron Gate of double leaf made out of ISA 50x50x6mm frame and supports of M.S.Flat 40x5mm fitted on joints of CR Sheet cover 1.6mm incl. hold fasts and locking arrangement and vichetgate duly welded and painted with red oxide paint

IRON GATES Iron Gate of double leaf made out of ISA 50x50x6mm frame and supports of M.S.Flat 40x5mm fitted on joints of CR Sheet cover 1.6mm incl. hold fasts and locking arrangement and vichetgate duly welded and painted with red oxide paint Fancy type using fancy pipe, sq.bar and gate channel

IRON GATES Iron Gate of double leaf made out of ISA 50x50x6mm frame and supports of M.S.Flat 40x5mm fitted on joints of CR Sheet cover 1.6mm incl. hold fasts and locking arrangement and vichetgate duly welded and painted with red oxide paint Plane type using angle iron amd MS Sheet of 1.6mm

IRON GATES Iron Gate of double leaf made out of ISA 50x50x6mm frame and supports of M.S.Flat 40x5mm fitted on joints of CR Sheet cover 1.6mm incl. hold fasts and locking arrangement and vichetgate duly welded and painted with red oxide paint Using MS Pipe 40mm dia and wire mesh

Iron Sagri medium size made of 0.63mm CR Sheet

Waste paper basket standard size made out of CR Sheet 0.63mm with reducing base duly painted

Collapsible Shutters Collapsible steel shutters with vertical Channels 20x10x2mm and braced with Flat Iron diagonals 20x5mm size with top & bottom rail T-Iron 40x40x6mm with 40mm dia, Steel Pulley complete with Bolts Nut locking arrangement, stoppers, handles including applying a priming coat of app. Steel primer.

Collapsible Shutters Fixation charges per shutter

Guide Frame Angle Iron 40x40x6mm with 50” long 1.25” dia GI Pipe B-Class and Angle Iron 1”x1”x1 suter attached with the GI Pipe to the length of 1’ with slotting alongwith Nut Bolts complete job (As per drawing).

Gas Holder Frame work with 12mm Square bar with 79” long 2” dia GI Pipe fitted with the plates at bottom & top of size 6”x6”x6mm and fabricated with14 guage sheet round and 16 guage sheet at the top fitted with ¾” GI Socket and 4 Nos. of handle complete job (As per drawing).

PASENGER SHED Sainless Steel Pessenger Shed Made of 304 pure quality Steel of Size 8’x20’ which includes 6’’ dia Pipe for pillar 4Nos. of 10’Trusses/purlins, vertical section made of stainless steel pipe of 1.5’’x1.5’’, 9 Nos. & 3’’x1.5’’ pipe 1 No. of 20’, base plate 12’’x12’’, top plate 8’’x8’’ stainless steel & Iron base plate 6mm thick with a complete roofing Made of sinusoidal color coated sheet of standard thickness 2.0mm with Sitting arrangement with two No. chrome coated full length chairs (3 seater)

SKYLIGHT DOME: Skylight Dome (polycarbonate sheet dome) made of MS hollow pipe Section painted with enamel paint, anchored to the base concrete with Necessary base plates with fastener, aluminium profile with EPDM Gasket in between for fixing 10mm multiwall polycarbonate sheet (UV Coated) fixed in position, incl, erection

COCOON TRAY Cocoon Tray size 124x91cm having depth 7.5cm, base wire mesh 1.6cm Sq. sides with CGI sheet with partition in the middle of CGI Sheet. Tray Mounted on Angle Iron frame of angle iron 2.5cm, 4 legs of 2.5cm of Having height 21cms. Each leg with top collar of same thickness (3cm) Angle welded giving one cm. space for stacking of trays one above the Other. Total weight of Tray 11.500 kgs (+5%) To be supplied as per Sample

Garbage Container Blue /Yellow or as per requirement 4.5 Cubic Mtr. Made out of Plate/HR Sheet 5mm, 3mm & 2.5mm and CR Sheet1.6mm, Channel 75x40mm, Angle Iron 40x4x0x5mm; Bottom 5mm HR Sheet/Plate, Side 3mm, Top cover tall gate 2.5mm HR Sheet, Window 1.6mm CR Sheet Bottom & Side structure; Channel 75x40mm, Angle Iron 40x40x5mm Leading windows 4 No’s

Fabrication of R.C. bins: including painting and letter writing complete job for capacity 1m M.S Plate at sides 3mm, bottom 4mm, MS Angle at top frame 50x50x6mm, side handle 2 nos 25mm MS round, Bse 48”x30”, Top 60”x42”, Height of bin 36”, Bottom Support of MS Angle 65x6mm, Painting Body Blue / Green, Interior Anti Rust Coating

Handlomm Weaving Machine (Loom) made of pipe 3”x11/2”,2”x1” sq, 1” round, 3/4 “round, 1 1/2 “ round rings, pullers, sheet box etc fitted with nut-bolts with paint work

Passenger Shed / Vatika (Gazebo type) Made out of M.S steel pipes 6” dia fitted with gusset plates, angle iron 40x40x6mm and also provide 0.5mm profile sheet roofing with J/2 hook bolts and also provide cast iron heavy duty ornamental grills on bottom & top with hollow SW pipe railing to bottom end.(as per department requirement)

Seed Bins made of size 17’ length & 17’ height having a Storage capacity of 50 kgs of rice made out of GP Sheets 0.5 MM thickness including cost of Hings, Lock, Kundi, Handless, Revets etc complete job

Item: Steel Complaint Boxes Size: 18”x15”x8” (LxBxH) Sheet: GP Sheet 22 Guage Hings: 02 Nos. (3”) Lock: Link or Godrej Make Paint: Blue Enamel Paint with writing

Item: Steel Complaint Boxes Size: 18”x15”x8” (LxBxH) Sheet: CR Sheet 22 Guage Hings: 02 Nos. (3”) Lock: Link or Godrej Make Paint: Blue Enamel Paint with writing

Mobile Toilet Van Specification for Toilet Van • Length of the toilet van excluding hook 7 feet 6 inches. • Breadth of the toilet van including the walk way on both sides-6 feet 10 inches. • Height from ground-10 feet. • Cubical height - 6 feet. • Cubical width – 3 feet. • Cubical breadth- 3 feet. • Number of W.c of stain less steel Railway Type- 04 No’s for four seater toilet Van. • Night soil tank of 3mm M.s sheet painted with Anti corrosive paint-700 ltrs capacity. • Heavy Duty MS water tank with two taps mounted on the chassis-500 lts capacity. • Door of each compartment made of MS frame fixed with 3mm aluminum composite panel and the partitions of the same material. • The walk way of M.S. angle iron 40x5mm with flat iron supports 1”x6mm provided with hinges fitted with chequered M.S. sheet 3mm thick on top. • Railing of M.S. pipe 40mm and M.S. pipe 25mm dia. • There shall be ladder fitted on the both sides of the van. • One outlet valve 21/2” pipe for foul smell. • Roof shall be made of 24 SWG FRP sheet or Polycarbonate sheet 3mm to be bolted at the top. • Flooring of each cubical shall be chequered Aluminum sheet. • 100mm out let valve for drainage. • There shall be 2 wash basins with at the back of the van with proper disposal. • There shall be two mirrors at the back of the van. • There shall be 2 no’s handle, 1 clothes hook, 2 no’s locking bolts in each cubical. • The whole toilet van shall be painted with green and blue color or any other colour combination from outside as per the design with will be given by the Department. • 100mm dia 20 feet long steel wire reinforced synthetic rubber pipe for disposal of waste. • The chassis shall be movable on a chassis fitted with the tyres, tubes and Rims. • Heavy duty toeing hook shall be provided in front of the van.

Insect Proof Net House (Quantity – 01 no – 528 Sq Mtr) Type: Doom Roof Type – Net House ( GI Pipe Structure) Width: 6m x 3 no + 2m x 2 no corridor = 22m Length: 4m x 5 no + 2m x 2 no corridor = 24m Total Area: 528 Sq Mtr Structure: It consists of Galvanized Tubular structure with 2mm thick GI Pipe Foundation 48mm OD, Column 60mm OD, Arch 48mm OD, Bottom Horizontal Beam 33mm OD, Bracing 33mm OD, Purlind 42mm OD and 33mm OD Clamps, Nut Bolts, Accessories, Door ( 1mx2m), (Tolerance +/-10%) Covering Material: It consists of U.V. stabilized insect net 40 mesh for roof and side covering buried in ground Locking Profiles: It consists of aluminum locking profile with zig zag spring for fixing of shade net Shade Net: It consists of U.V. stabilized shade net 50% inside poly cum net house with nylon sports cables, pulleys, side support with clamps with manual collapsible arrangement Drip Irrigation System: It consists of Inline Lateral 16mm, 2.1 lph@30cm spacing, 4kg/cm2 PVC main and submain pipes, PVC Ball Valves, Ventury Assembly, Air release Valve, Flush Valve, connected to common plastic disc filter, fittings and accessories Foggers System: It consists of Four way anti – leak foggers with 28lph discharge at 2.5m x 2.5m spacing, PVC Pipes of 6 kg/cm2 pressure ratings of various sizes, PVC Ball Valves LLDPE laterals 16mm, Poly Joinners 16mm, Poly Take Off 16mm, Poly elbow 16mm, Flush Valves for flusing of submain, Plastic disc filter, fittings and accessories Installation & Transportation Charges

Poly House Semi Hitech Naturally Ventilated Poly House (Quantity – 01 no – 240 Sq Mtr) Type: Natural Ventilation (Channel Cum Tubular Sructure 2 mm thick) Gable Length: 8m x 1 no + 2m x 2 no corridor = 12 m Gable Length: 4m x 4 no + 2m x 2 no corridor = 20 m Total Area: 240 Sq Mtr Structure: Structure Consist of Pre Galvanized Channel cum Tubular structure made of lipped channel 15mmx50mmx80mmx50mmx15mm, 2.9mm thick columns and side corridor of size 10mmx40mmx60mmx40mmx10mm of 2mm thickness. GI Pipe Trusses 48mm OD 2mm thick, Gutter 2mmt thick, Bracings 33mm OD GI Pipe, Purlin 10mmx40mmx60mmx40mmx10mm 2mm thick. Side Ventilation with roll up curtain, curtain pipe, curtain handle, nut bolts, clamps (Tolerance +- 10%) Covering: U.V. Stabilized Polyethylene film 200 micron thickness, IR blocking, Anti Drip/Fog, Diffused (Multilayor) for covering. Apron of Polyfilm 1.2 to 1.5 mtr on all four sides with GI fixing arrangement and bottom of the poly film to be embedded in soil. Locking Profiles: Aluminum Locking Profile with zig zag spring for fixing of poly film for roof and side. Side Ventilation: It consists of manual Oporable side roll-up curtains 3.0 to 4.0 mtr on all four sides with curtain pipe, handles, Universal Joint and Insect net 40 mesh below the curtains with proper fixing mechanism. Insect Net: U.V. Stabilized, Insect Net 40 Mesh at ridge vent. Shade Net: U.V. Stabilized shade net 50% inside Poly House (Green/White Colour) with manual collapsible arrangement Drip Irrigation System: It consists of Inline Lateral 16mm, 2.1 lph@30cm spacing, PVC main and submain pipes -4kg/cm2, PVC Ball Valves, Poly Joinner 16mm, Poly Take Off 16mm, Air release Valve, Flush Valve, connected to Common Filtration and Pumping Unit, Fittings and Accessories. Fogging System: It consists of Four Way Anti Leak foggers with 28lph discharge at 2.5mx2.5m spacing, PVC Pipes of 6kg/cm2 pressure rating of various sizes, PVC ball Valves, Poly Joinner 16mm, Poly Take of 16mm, Poly elbow 16mm, Flush valves for flushing of submain, connected to Common Filtration and Pumping Unit, Fitting and accessories. Rain Water Drain Pipe: It consists of PVC Pipe 110mm Dia will provided from Gutter to Ground Mono Block Pump 2HP with Starter Air Circulation Fan – 02 Nos Water Tank 1000 Litre – 01 No Civil Work: Foundation of main column, corridor and midpoles only Installation & Transportation Charges

Iron Fencing of size 9’x6’ frame made of Angle Iron 40x40x5mm and 32x32x5mm fitted with GI Chain Link Mesh of size 50x50mm. Mesh strengthened with Flat Iron 40x5mm and 32x5mm fixed with 2mm dia wire. Total height of frame shall be 7 ½’ including 6’ height of frame and 1 1/2 ‘ angle iron for plenth

Supply, Fabrication & Installation of Sanitizing Tunnel structure size 8’x5’x8’ (LxBxH) made of M.S. Square Pipe 40x40mm (16 Gauge) for structure, M.S. Square Pipe 25x25mm for roof and internal support duly painted with white color including red oxide primer coat. Two sides fitted with ACP (Aluminum Composite Panel) 3mm Sheet & on the top color coated sheet. Fogging System consists of 6 nos foggers, lateral 16mm as submain & 32mm as main pipeline alongwith fitting & accessories. Water Storage Tank Capacity 500 Ltr – white color (minimum 3 layers) alongwith Mono block Pump of 1 HP (ISI Mark) alongwith fittings & accessories. Antiskid mat 5’x8’ for flooring. The structure shall have provision of LED bulb alongwith switchboard of mono block pump. The entrance & exit of the tunnel shall be covered with transparent sheet of standard quality. Providing flex as per logo design provided by the intending department. (Complete Job)