Small Scale Industries Development Corporation Limited Tender

Repair to Existing Panel:- Repair to existing panel for Road lighting N/W by way of replacement of following items Contractor MNX 45 -3 No. Timer- 3No. MCB 63A 4P -2 No. TPN 25Amp-----10No job also includes replacement of wiring and painting of panel & fencing etc at site Including job.

Painting of poles:- Job charges painting of existing Steel tubular poles with bracket and connection boxes with white silver paint etc as required.

Flexible Nylon Pipe:- Supply/ fixing of nylon flexible pipe ½ dia.

Cable Looping Box:- Supply and fixing of dust and weather proof gasketted 200mm x 200mm x 150 mm deep cable looping box (nominal) size made out of 18 SWG fitted with pole with the help of 2 Nos. MS clamp (25x3mm) thick flat strip of suitable size with nuts and bolts. Complete with hinged cover locking L-Key/Nut Bolts type, earth studs suitable for poles mounted including supply and fixing of 6A MCB SP, MCB carrier and 4-way 63A terminal block fixed on suitable size and suitable for receiving PVC armored cable complete with connections and painting etc.

Connection Strip:- P/f of connection strip 63Amp 4pole with connection of incoming and outgoing of cables.

MCB:- P/f of SP MCB 6Amp. in existing connection box

Connection Wire Supply/ Drawing of Following Sq.mm PVC insulated Multi stand copper wire with Flexible conduit:- 2x1.5 Sqmm

G.I pipes:- Providing, fixing, laying of GI pipes 50 mm dia. B-Class for road crossing etc as required complete job

Repair to Existing LED 120/150Watt high mast lights :- Repair to 120/150 watt LED fittings installed on 11mtr steel tubular pole in the premises of ADM block and Truck terminal of Industrial complex Ghatti Kathua Complete job includes cost of material, moving ladder charges, skilled labour and tool-tackles, etc as per site requirement

Re-Construction of Pole Muff:- Re-Construction of Damaged Cement Concrete Muff in cement concrete in the ratio of 1:3:6 (1 cement :3 coarse sand :6 graded stone, 40mm dia nominal ).The foundation upto 1mtr above ground level the pole tapered suitably in to the collar in round shape of 0.5 M dia. The exposed portion of the block is to be plastered properly and white washed. complete job in all respects.

Wire Mesh Shield:- Fabricated, supplying & fixing of 3 mm wire mesh shield made out of angle iron & mesh. Wire for protection to 60 Watt LED fitting on pole. It should be painted with red oxide and silver white aluminum paint and proper clamped and should be detachable for maintenance of fixture. Complete job in all respect.

Internal Electrification at Tube wells:- Repair to internal wiring system of tube wells by way of Providing/ fixing of holders with LED Lamps, LED fitting 20 Watt, wiring 1 X 1.5 Sq.mm and (15/5Amp) switches/Sockets etc as per site requirements

Providing & Fitting of Lighting Arrestor:- Providing/ Fixing of Lighting Arrestor (Station Type) at distribution substations of ADM block.

Providing & Fixing of Chain link fencing:- Chain link fencing (7ftx7ftx4ft) (LxBxH) supported with angle iron and making door for Entrance. Complete with grouting with cement concrete painting, welding, required aggregate 40mm dia in each t/wells etc. (1,2,3,4,5,6,7,CFE and Near Adm Block)

P/f of Prodigy meter:- P/f of PDD approved make prodigy meter at various t/wells along with cable and allied components etc. (T/well no1,3,4,5) complete job

Upgradation of Existing Tube Wells Providing & Fixing of GO/DO for tube wells NoAdm/CFC/store shed/ Main Road 400 Amp. with allied accessory complete with connection & testing at site complete job.

Supplying of Heavy duty Aluminum tilt able tower extendable telescope square type ladder of height 16 Ft when closed and 28 Ft when open consisting of two ladders with one overlap made out of extruded tested quality Aluminum ladder section of size 66mm (2.5/8”) x 31mm (1.14”) x (3mm) (1/8’) thick approx with steps made of Aluminum fluted pipes of 25mm (1”) dia approx. At a distance of 300mm (12”) complete with a set of rope pulleys and winch arrangement with suitable size steel rope for extending and closing the extended section of ladder to any required height fabricated on M.S channel frames duly covered with 16 SWG M.S sheet for carrying materials and four tube less typre. Complete with tow bar. The platform of size 2’x2’ on the top guarded from three sides should be provided, for safe working. Further the ladder should be provided with mechanical system to tilt the complete ladder on rest and again lift the same for working having additional winch set complete with required M.S pulleys and steel wire rope to enable to reduce extra man power to handle the ladder. The ladder should be anodized and provided with a special system for operating the ladder to any angle and 10 Mtr. chain with locking system. Note:- the ladder should be heavy duty with tubeless tyres.

Supplying of 3/5Ton chain block of 6mtr chain of reputed make for extraction/lowering of submersible pumps at site

Supplying of various tools for maintenance purpose like plier, spanners, screw driver, digital meters, clamp meter, hammer, chisel, cutter, drill machine etc.

Providing & Fixing of LED Fitting:- Providing & fitting of 100/120 Watt LED Security Light fixing on board with help of angle iron Bracket of suitable size and length, Clamps & Nut Bolts etc. complete job includes cost of material with labour charges etc. at site. Complete job

Dismantling of Existing steel Tubular poles:- Job charges for Dismantling of Existing steel Tubular poles by means of skilled labour/ electrician and crane etc. and same shifted to store by mechanical Transport. Complete job includes carriage charges, labour charges and taxes etc