Small Scale Industries Development Corporation Limited Tender

Providing and fixing glazing in aluminium doors window, ventilator shutter with PVC /neoprene gasket etc complete as per the architectural drawings ( cost of aluminium snap beading included in basic item) with glass panes of 5 mm thickness plain glass (Weight not less than 13.50 kg/sqm) of saint gobain as per architects/ client approval

P/F of 12 mm pre laminated 3 layer medium density exterior grade particle board Ist conforming to 12823 bonded with thermal funal deldyde reason approved brand and manufacture in panelling fixed aluminium doors windows shutters and partitions frames with CP bosses stainless steel screws etc. complete.

Double action hydraulic floor springs of approved brand and mfg. IS 6315 make for doors incl. the cost of cuttings floors as required embedding in floors and cover plates with brass rivet and single piece MS sheet outer with slide plate etc. complete job.

P/F 100 mm long (4”) ISI marked aluminium tower bolts anodized anodic coating not less then grade AC as per IS 1868 transparent of dyed to required colour or shade with necessary screws etc. complete ,.(powder coated)

P/F 150 mm long (6”) ISI marked aluminium tower bolts combined anodized anodic coating not less then grade AC as per IS 1868 transparent of dyed to required colour or shade with necessary screws etc. complete ,.(powder coated)

P/ 100 mm (4”) long size double lever marked brass lock made of approved quality for aluminium doors I.C necessary cutting and making good complete job. (link locks)

P/F 125 mm long (5”) size ISI marked aluminium handles anodized anodic coating not less then grade AC to as required colour on shade with necessary screws etc complete . (D handle)

P/F 200 mm long (8”) size ISI marked American aluminium door handles anodized anodic coating not less then grade AC to as required colour on shade with necessary screws etc complete .

P/F 100 mm long 4” size superior quality ISI marked hinges necessary screws/stainless steel complete.

Providing and fixing of air hooks/air brows

Providing and fixing IS 3564 marked aluminium die cast body tubular type universal hydraulic door closer, best make of approved quality embossed on the body, door weight upto 35 kg and door width upto 700 mm with necessary accessories and screws ete complete.

Providing and fixing of aluminium floor door stopper ISI marked anodized (anodic coating not less then grade AC 10 as per IS 1868 transparent of dyed or required colour or shade with necessary screws etc complete.(twin rubber stopper)

Providing and fixing of fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

Providing and fixing ACP ( Aluminium Composite Panels 3.50 mm without V/U grouping

Providing and fixing ACP ( Aluminium Composite Panels 3.00 mm V/U grouping

Providing and fixing ACP wooden shade ( Aluminium Composite Panels 3.50 mm without V/U grouping

Providing and fixing ACP wooden shade wooden shade ( Aluminium Composite Panels 3.00 mm V/U grouping

Providing and fixing glazing in aluminium doors window, ventilator shutter with PVC /neoprene gasket etc complete as per the architectural drawings ( cost of aluminium snap beading included in basic item) with glass panes of 5 mm thickness plain toughen glass (Weight not less than 13.50 kg/sqm) of saint Gobain as per architects/ client approval

Providing and fixing glazing in aluminium doors window, ventilator shutter with PVC /neoprene gasket etc complete as per the architectural drawings ( cost of aluminium snap beading included in basic item) with glass panes of 5 mm thickness reflective or coloured toughen glass (Weight not less than 13.50 kg/sqm) of saint Gobain as per architects/ client approval

P/F of Aluminum partition colour 14 guage section 2 ½ “ x 1 ½ “ with 12mm thick pre laminated particle board flat pressed three layer wherever required including cleat angle, aluminum snap beading for glazing / paneling C.P brass/ stainless screw rubber all complete as per architectural drawing & engg Incl pre laminated particle board with decorative lamination on b/s.

P/F of steel frame railing of size 1 ½ “ x 1 ½ “ of stainless steel 18 guage for fixing of 12mm grinded glass in front of work station including patch fitting screw complete job.

P/F of 12mm thick glass grinded in front of work station cabin.

P/F of 5mm frosted glass with aluminum frame of 2 ½ “ x 2 ½ “ including all necessary fitting complete job at top of partition.

P/F of door/windows shutters & frame 2 ½ “ x 1 ½” aluminum section including hinges, lock, handle, tower bolt, doors topper. 5mm glass plain complete glass

P/F of 12mm thick framed toughened glass approved brand & manufacture including P/F including pnot & lopping type arrangements & necessary holes etc for fixing of fitting etc all complete.

Fabrication, Assembly & supply of Galvanized Steel Towers and Tower Accessories. Fabrication, Assembly & supply of Galvanized Steel Towers and Tower Accessories. Specification: i. The design of Tower shall be carried out in accordance with provisions covered as per IS:802 of 1992. ii. Steel section in conformity to IS:808-1976 are to be used in Towers ectension and steel setting template conforming to IS 2062-1992. iii. High Tensible steel as per IS 8500 is permitted for fabrication of Towers. iv. Structural steel angle section manufactured accordingly to IS 808-1976 and tested according to IS 2062-1992 having yield strength not less than 250N/ Sqmm and stress value of high tensible eteel ( Fe 490 & Fe 540) according to 8500-1992. v. Straightening shall be done so that it does nnot injure the materials no hamerring permitted. vi. the cut surface shall be clear, smooth, reasonable square. vii. Holled in the members shall either be drilled or purchased to jig and shall not be formed by flame cutting process. viii. Bending of mild steel angles shall be bent odd. ix. Fasteners, Bolts , Nuts & Washers shall confirm to IS 6639-1972 & IS 12427-1988. All bolts, nuts, washers shall be galvanized. x. All taxes ......... and stabe shall be fully galvanized conforming to IS 2629-1966 & IS 4759-1968. The section must withstand test as per IS 2633 1972. For fastuers it shall conform to IS 5358-1969. Spring washers shall be galvanized as IS 1573-1970 xi. All galvanized tower stell and stab angles shall be handled and transported to work site by the contractor with care to avoid damages.