Shri Mata Vaishno Devi University Tender

Main chair for HOD Cabin Supplying, and placing in position of High back 360°-degree revolving chair all over size is: 590mm(l)x 505mm(d)x 1280mm(h),the chair made of full leatherette in black colour.it will comes in matte black finish in contemporary style .arms : chrome finish arms with pu padding .use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) .seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back . backrest support foam design based on symmetrical lumbar support mechanism: knee tilt mechanism. only seat size is 505mm(l)x 505mm(d)x 610mm(h) & the back size is 590mm(l)x 710mm(h) seat maximum height is 610mm & minimum height is 510mm & back height from floor maximum height is 1280mm & minimum height is 1180mm gas lift 100 mm telescopic haudraulic base: 650 mm chrome base with smooth castors. . The product should be as per above given specification under the guidance of Engineer in charge.

Visitor chair for HOD Cabin fix cantilever chair all over size is : 610mm(l)x 505mm(d)x 990mm(h) ,The chair made of full leatherette in black colour.it will comes in matte black finish in contemporary style .arms : chrome finish arms with pu padding .use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) .seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back . backrest support foam design based on symmetrical lumbar support backrest support only seat size is 610mm(l)x 505mm(d)x 485mm(h) & the back size is 610mm(l)x 540mm(h) ,base : chrome finish tubular frame of cantilever type . The product should be as per above given specification under the guidance of Engineer in charge.

Sofa for HOD Cabin Dimension(W)1380mm X (D)880mm X (H)760mm Supplying, and placing in position of sofa as per photograph. The contemporary design is boldly finished in a stark burgundy red premium leatherette upholstery that covers the cushioned seat for a truly invigorating experience. The paneled back cushions offer great lumbar support for the lower back. The curved arms flow effortlessly into the base of the sofa for a uniform structure giving it a seamless finish.The sofa sits strong on PVC legs that are made to last. Material:Premium Leatherette,Seating Height 460mm,Legs: PVC.The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. . The product should be as per above given specification under the guidance of Engineer in charge.

Main Table for Incharge Room Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top made out of 32mm thk prelam Ply confirming to IS-1328:1998 with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thickPly .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Ply confirming to IS-1328:1998 with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated Ply confirming to IS-1328:1998 and rest all storage to be made out of 18 mm thick prelaminated Ply confirming to IS-1328:1998 . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The product should be from the manufacture which have FSC Certification, BIFMA Compliance Certification , Green Pro Certification and from the approved make of Durian, Godrej & HNI . The product should be as per above given specification under the guidance of Engineer in charge.

Back Storage for Incharge Room Dimension: 2400mm(L) X 450mm(D) x 750mm(H) Supplying, and placing in position of low height back storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick prelam Ply confirming to IS-1328:1998 and rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelam Ply confirming to IS-1328:1998 while back to be made of 8 mm thick Ply. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with D shape handles & locking arrangement. . The product should be as per above given specification under the guidance of Engineer in charge.

Chair for Teaching room Supplying, and placing in position of Fix cantilever all over size is: 595mm(l)x 510mm(d)x 875mm(h) as per image., the chair made of full leatherette in black colour .it will come in matte finish in contemporary style. arms: padded armrest. Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back). seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support only seat size is 500mm(l)x 510mm(d)x 455 mm(h) & the back size is 440mm(l)x 595mm(h), back height is @ 440mm. base: 4 legs metal powder coated. . The product should be as per above given specification under the guidance of Engineer in charge.

Meeting table for College council room Dimension : 5000mm(L) X 1500mm(D) X 750mm(H) Supplying and placing in position Conference table of the following specification with wire manager size shall be 5000 Width mm x 1500 Depth mm x 745 Height mm . The top shall be made from 25 mm thick pre- laminated Ply confirming to IS-1328:1998 with 2 mm PVC edge beading. The understructure shall have side panels of 25 mm thick pre-laminated ply confirming to IS-1328:1998 twin with 2 mm thick PVC lipping of same color on sides and 0.8 mm PVC lipping of matching coloron the bottom curve. The Modesty shall be made from 18 mm thick pre-laminated Ply confirming to IS-1328:1998 with 0.8 mm PVC lipping of matching color. Centre Support Panel For Seater shall have panels made from 25 mm thick pre- laminated ply confirming to IS-1328:1998 twin with 2 mm PVC lipping of matching color on sides and 0.8 mm PVC lipping of matching color on the bottom curve.

Table for Museum room / Skill Lab

Dimension : 2400mm(L) X 1000mm(D) X 750mm(H)

Dimension : 3600mm(L) X 1000mm(D) X 750mm(H)

Supplying, and placing in position of table as per photograph/drawing. The table shall be made out of 36mm thick prelam Ply confirming to IS-1328:1998 with pvc edge banding. .Table top shall be supported with 36mm thick Side panel and modesty panels shall be made out of 18mm thick prelam Ply confirming to IS-1328:1998 with pvc edge banding . All exposed edges shall be provided with machine pressedpvc edge banding. Provision of 6 module flip top box for wire management and raceway under the table top for wires flow. . The product should be as per above given specification under the guidance of Engineer in charge.

Medium back chair for Museum room / Skill Lab

Supplying, and placing in position of medium back 360°-degree revolving chair all over size is: 610mm(l)x 470mm(d)x 1040mm(h) as per image. the chair made of full mesh in black colour.it will comes in matte finish in contemporary style. Arms: armrest is having two adjustment heights (up & down). use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat, back: frame of design shall be curved made of two pieces injection moulded frame cover with mesh. backrest support adjustable lumbar support mechanism: self-weighted multi locking mechanism. gas lift 100 mm telescopic haudraulic base: 650 mm chrome base with smooth castors.. The product should be as per above given specification under the guidance of Engineer in charge.

Medical Bed for Demo room

Dimension:(L) 2250mmX (W)1050mmX (H) 560mm Supplying, and placing in position of medical bed as per Image. The bed is made from ABS stainless steel and the Two Section Top is Made of Perforated Sheets While the Framework is Made of Rectangular M.S. Tube. The screw handle is very smooth and works perfectly if you want to tilt the upper portion of the bed. This is a full fowler bed that is available in ergonomic design. It also has head and foot Plys for the ease of use. 4 Wheels Fitted in Leg Stand,Material: ABS Plastic,Four Segment Punctured Bed Used for Knee Rest & Backrest Capacities. Removable PP head Ply and foot Ply should have cut outs , for better gripping. Lying surface should be made of CRCA sheet of thickness of 1 mm. This lying surface should have 4 sections for bed profiling i.e. back adjustment, fixepelvic section, upper and lower leg adjustment. High endurance metal castors provided with dual locking arrangement are diagonally placed. Wheel Dia 125mm Diagonal locking should provide better Stability to bed in the locked position. The product should be as per above given specification under the guidance of Engineer in charge.

Main Table for CEO Room/ED Principal room

Main Table Dimesnion: (L)2300mm X (D)900mm X (H)750mm All over Side Runner Dimension: (L)1940mm X (D)450mm X (H)650mm Supplying, and placing in position of a straight line table with wire manager as per photograph/drawing. The main desk of size 2400mm (L) X 900mm (D) X 750mm (H) shall be made out of 42mm thick pre laminated Ply confirming to IS-1328:1998 with the approved shade. Table top supported with side panels and modesty panel. The side panels made out of 42mm thick pre laminated Ply confirming to IS-1328:1998 & modesty panel made out of 36mm thk pre laminated Ply confirming to IS-1328:1998 of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Pop-up - cable manager box in the table .The Fixed Side Runner attached to the table of all over size 1940mm (L) x 450mm (D) x 650mm (H) has a provision for three drawer with locking facility , two openable shutters with locking arrangement , open storage with shelf & one open storage for cpu.The another side panel of table top having a provision of two attached drawer as per photograph. The table top rest on SS studs for design purpose same as per image. The product should be as per above given specification under the guidance of Engineer in charge.

Back Storage for CEO Room/ED Principal room

Dimension (L) 2300mm X (D)450mm X (H) 900mm Supplying, and placing in position of medium height back storage @ 900mm height as per photograph/drawing . The storage unit having combination of open storages & Openable shutters with shelf in it. The modular storage unit top shall be made from 25mm thickPly and rest of the sides as well as shelves and shutter to be made up of 25 mm thick pre- laminated Ply confirming to IS-1328:1998 while back to be made of 8 mm thick Ply. All edges to be provided with 2 mm thick PVC lipping. The product should be as per above given specification under the guidance of Engineer in charge.

Main Chair for CEO Room/ED Principal room

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made up of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (32 & 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with polypropylene arm with cushion base leatherite covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged MS CRCA powder coated with 40-60µ thick having pitch circle dia. 600 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 710±10 mm(H) from seat. Overall height shall be = 1140±10 mm, overall depth/width = 700±10 mm.

Visitor Chair for CEO Room/ED Principal room

Providing and supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+30)mm thick having density (30, 32)kg/m³ in seat and (40+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with polypropylene arm with cushion base leatherite covering top. The frame structure shall be cantilever support type made of MS CRCA powder coated 50-60µ (DFT) thick round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 480±10 mm(D) X 520±10 mm(W) and back size shall be 540±10 mm(W) X 600±10 mm(H) from seat. Overall height shall be = 1055±10 mm, overall depth = 640±10 mm & overall width = 660±10 mm.

Sofa for CEO Room/ED Principal room

3 seater Dimension (L)1985mm X (D)975mm X (H)920mm

2 seater Dimension (L)1425 mm X (D)975mm X (H)920mm

Supplying, and placing in position of sofa as per photograph. The contemporary design is boldly finished in a stark burgundy red premium leatherette upholstery that covers the cushioned seat for a truly invigorating experience. The paneled back cushions offer great lumbar support for the lower back. The curved arms flow effortlessly into the base of the sofa for a uniform structure giving it a seamless finish.The sofa sits strong on PVC legs that are made to last. Material:Premium Leatherette,Seating Height 460mm,Legs: PVC.The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. . The product should be as per above given specification under the guidance of Engineer in charge.

Side Table for CEO Room /ED Principal room

Dimension(L)680mm X (W)530mmX (H)460mm Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood ( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy, Style:Contemporary. . The product should be as per above given specification under the guidance of Engineer in charge.

L-Shape Workstation for Support Staff area/ Establishment Section area

Dimesnion: (L)1350mm X 1350mm(L) x (D) 600mm X (H)1200mm Supplying and placing in position of sliding tile base modular Workstation as per photograph/drawing. Free standing partition height 1200mm and should be minimum of 65-67mm thick. Partition inner frame is 1.1-1.2 mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.mm thick. All Panels/trims shall be powder coated with 50 microns. Aluminum trims are elegantly fixed with special fixtures in the partition. The frame work shall be fitted with 9mm thick pre laminated ply confirming to IS-1328:1998 tiles of approved shade. Partition shall have provision for pin up Ply with fabric/ white marker/ laminated of approved shade. Partition framework shall have adequate provisions for the movement of electric data cables at desired 2 levels; one at skirting and another above / below the table top. The complete partitioning work shall be carried out as per the approved drawing. Tabletop for workstation made up of 25mm thick pre laminated Ply confirming to IS-1328:1998 of approved shade. The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated Ply confirming to IS-1328:1998 of approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. . Provision of one PVC key Ply tray and Metal CPU trolley with lockable castors for each seating. Also a provision of Mobile Pedestal Unit (size:- L-400mm x D- 450mm x H-600mm) with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle Ply with provision of handles & central Locking arrangement. The product should be as per above given specification under the guidance of Engineer in charge.

Table for store room

Supplying, and placing in position of office desk office desk structure of rectangular shape as per image . Primary work surface overall size is 1200mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of 25mm thick prelaminated Ply confirming to IS-1328:1998 work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel made of 18mm thick ply, wire management hole with pvc grooment on table top. Construction right side of table top is based on a fixed pedestal 3 drawers & from left side of table top is based on 18mm thk engineered wood pvc edge banding pedestal back, top, bottom & drawers are made of 18mm thick with 1 cpu trolly made in black metal powder coated. Fixed pedestal: l:410mm(l)x 580mm(d)x 750mm(h) ,in provided with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with facia of drawers.. The product should be as per above given specification under the guidance of Engineer in charge.

Metal Sofa for Passage area

Dimesnion: 1200mm(L)X 690mm(D)X 790mm(H) Supplying and placing in position of a mild steel visitor bench as per image. the complete mild steel bench has seat & back single section. per seat length is @ 520 mm & seating height is @ 430 mm from ground, perforated mild steel. owing to the smooth finish, durability and tensile strength beam made of mild steel 1.6mm thick. Seat is made by 1.2mm thick mild steel border with chrome plating for every seat & back; mild steel handles chrome plated & die pressed legs at the end of chairs. Gross weight of regular 2-seater will be 23 kg. The steel grade 202 high yield strength as per is:513 & is:304 grade. . The product should be as per above given specification under the guidance of Engineer in charge.

Reading table for Dep Library area

Dimension: (L) 1200mm X (D) 600mm X (H)750mm

Supplying and placing in position of table as per image/drawing.The Table top are made out of 25mm thk prelam Ply confirming to IS-1328:1998 with 2mm thk pvc edge banding with ms powder coated "C" shape legs of size 50mm x 50mm Comprising of metal powder coated cross connectors of size 40mm X 40mm.Providing metal wire raceway & junction box/pole for connectivity of wires & cables. Also having a provision of 6 module fliptop box for wire flow. . The product should be as per above given specification under the guidance of Engineer in charge.

2 Seater : Front Desk With TOP for Lecture Theatre Providing and supplying student desk cum bench. The top of the desk shall be 25mm thick made up of Ply of grade II of IS confirming to IS-1328:1998 with approved laminate and shade. To protect the wall from kicks, abrasion and serve as a decorative moulding the front of the desk shall be covered with 25mm thick Ply confirming to IS-1328:1998. The edges of the Ply shall be sealed with 2mm thick PVC edge banding. The desk shall be supported on CRCA rectangle shape pipe with cross-section area 80mm X 40mm with 2.5mm thick and table understructure shall have two nos. metal base leg made of CRCA elliptical shape pipe of 75x25x2.0 mm thick and welded together and base plate shall be 10mm thick. A CRCA powder coated sheet frame 2.0 mm thick shall be provided below the top for structural support. The seat shall be made up of metal insert moulded polyurethane foam having density 45Kg/m³ and covered with PP/ABS cover. The back shall be made up of 9 mm thick hot pressed plywood upholstered with high resilience polyurethane foam having density 35Kg/m³. The seat and back shall be padded with leatherite tapestry with 1±0.2mm thick. The seat shall have tip-up mechanism in which the seat shall be able to pull down for sitting on and return to an upright position. The Ply shall be supported on CRCA rectangle pipe having size 80mm X 40mm X 2.5mm thick. The pipe frame shall be electrostatically coated with epoxy powder with 40-60µ thick. Size Desk height- 750mm +/- 10mm, Seat Height - 450mm +/-10mm , Seat Size-450mm(W)x480mm(D), Back Size - 450mm(W)x450mm(H) Top Size- 400mm(W)x1200mm(L)x25mm thick(Two Seater).

Table for Lecture Theatre Supplying, and placing in position of office desk office desk structure of rectangular shape as per image . Primary work surface overall size is 1200mm(l)x 600mm(d)x 750mm(h) 25mm thick table top made of 25mm thick prelaminated Ply confirming to IS-1328:1998 work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. modesty panel made of 18mm thick, wire management hole with pvc grooment on table top. Construction right side of table top is based on a fixed pedestal 3 drawers & from left side of table top is based on 18mm thk engineered wood pvc edge banding pedestal back, top, bottom & drawers are made of 18mm thick with 1 cpu trolly made in black metal powder coated. Fixed pedestal: l:410mm(l)x 580mm(d)x 750mm(h) ,in provided with central lock for security and handles are provided for easy of opening. Overall construction of pedestal is 18 mm along with facia of drawers. . The product should be as per above given specification under the guidance of Engineer in charge.