Sher E Kashmir University Of Agricultural Sciences And Technology Tender

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supply,Installation,Testing and Commissioning and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.(switch and 6 / 16A glossy white with modular plate 2/4/6/8/10 way and face plate) / equivalent

Supplying and fixing 32 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

40 Amps DP

63 Amps MCB DP

S/I of RCBO with overload 100 A 4 Module Four pole 300 mA

SITC of shunt trip coil of 24-30 V AC/DC. Complete in all respects as required at the site.

SITC of MSU Over Voltage Release protectiion 440 V AC Hager/ Legrand/Havells

Fabrication, supply, installation, testing & commissioning of Indoor type to be recessed in wall and compartmentalized Panel having front area not less than 0.60 Sqmtr (600 mm x 600 mm) and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, Double door arrangement i/c locking arrangement, having 300 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling,etc. complete as required. INCOMER/Outgoing Thermal Magnetic Based MCCB 160 Amps FP Icu=Ics=100% with Breaking Capacity 36 KA (01 Nos) MCB SP Spacing for 20 Nos , RCCB 300 mA - 1No , Indicating Lamps RYB (1 Set) Aluminium Busbar 300 Amps FP E-91 E Grade Electrolytic Aluminium Gland Plates to be 3.0 mm Thick. Outgoing 160 A MCCB (01No.) Bypass 3 Phase Changeover 100 A (02 No.)

Supply,Installation,Testing and Commissioning and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.

3.5 C X 150 Sq.mm A2XFY

Supply,Installation,Testing and Commissioning and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in the ground including excavation and refilling, etc. Complete Job

90 mm dia nominal

Supply,Installation,Testing and Commissioning and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)

3½ X 150 sq. mm (50mm)

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.l strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G. I. nut bolt & spring washer spaced at 50mml

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2. 7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required

Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

8 way (4 + 24), Double door

P/F of MCB TPN 63 A

Fabrication of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr (600 mm x 600 mm) and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 600 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) . Complete as per site requirement with INCOMER/Outgoing Thermal Magnetic Based MCCB 250 Amps FP Icu=Ics=100% with Breaking Capacity 50 KA (01 Nos) Indicating Lamps RYB (1 Set) Voltmeter-0-500 Volts(1 Nos) Ammeter(0-150 A)(1 Nos) Current Transformer 100/5 A 10 VA Burden, Class-1(1 sets) Aluminium Busbar 600 Amps FP E-91 E Grade Electrolytic Aluminium

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any, during the execution of work complete in all respects.