Sher E Kashmir University Of Agricultural Sciences And Technology Tender

On concrete work

Supplying and stacking at site

63 mm to 45 mm size stone aggregate.

53 mm to 22.4 mm size stone aggregate.

Stone screening 11.2 mm nominal size (Type B).

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.

New work (Two or more coats).

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

300 mm dia. R.C.C. pipe

600 mm dia. R.C.C. pipe

Providing & fixing PVC pipe of specified dia to proper slope and proper bed in (1:5:10) mix complete item.

150 mm dia

Providing and laying of 25 mm thick open graded premix carpet (compacted) with specified graded stone aggregates for wearing course including loading of aggregates with FE loader and hot mixing of bitumen with filler and stone aggregates in hot mix plant, transporting the mixed material by tippers to paver at site of work and laying the mixed material with mechanical paver finisher to the required level and grade, rolling with power road roller to achieve the desired density and compaction including cost of priming coat/tack coat and seal coat, dressing of berms including cutting/filling with RBM up to 1 m width and 15 cm depth on both sides of the road surface including disposal of mulba to proper specified place including rolling with road roller and compacting (complete job) (Bitumen used shall be VG-30 and grading of mix sahll be as per the relevant clause of MORT & H) all complete including cost of bitumen and all sort of taxes.