Sher E Kashmir University Of Agricultural Sciences And Technology Tender

Supply , Loading, Transportation, insurance, Unloading, Carriage and Delivery at Site and erection of 9 Mtr. Long ST Poles (410, SP-33) with pit excavation

S/I of GI V cross arm for 11 KV Line with angle iron brace fabricated 75x40x6 mm x 5ft , clamps etc

Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1700mm for 9 mtrs Long ST Poles (the leftover pit after concreting to be filled with soil and boulders)

Supply and painting of each Pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint)

Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr (900 mm x 900 mm) and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. Details as under Panel Powder Coated 2.0mm MCCB 160A 4P 50kA , Thermal release 50KA 1 No. Bty Pass changeover 100A 4 Pole Havells/L&T /Equivalent = 1No Digital V,A,F, PF Meter Class 1.0 L&T 2 No.CT 600/5 AE 2 Set Spreader Terminals For DU MCCB 1 Set , , Panel Accessories like nut bolts, locks, etc

P/f of 11 KV disc insulator Heavy duty

Supplying and erection of 11 KV pin insulator complete with large steel head G. I. pin, nuts, washers etc. as required DSR 13.10

33 kV link set Heavy duty complete with all accessories ISI standard Heavy duty 600 Amp

11kV lightening arrester set Heavy duty complete with all accessories ISI standard Station type

11kV drop out set Heavy duty complete with all accessories ISI standard

GI Wire 8 SWG with termination

Ch iron 75x40x6mm x 9ft DSR code 2018 13.4

Angle iron 50x50x4mmx6ft Brace ( 50 mm X 50 mm X 6 mm angle iron )DSR code 2619 Rate per mtr 369/Mtr

Muky claps /J hook , galvanized nuts and bolts as required for all items included . Complete job for entire work

S/l of Guy with turn buckler and Guy insulator etc, 8 SWg twisted GI wire laid in cement concrete . Complete job in all respects.

Ch iron 100x50x10ft x 6 mm with angle iron brace 5 ft x4 No .

Supply, fixing, testing and commissioning of Prodigy LT Energy meter 3 phase 4 wire- Make Havells /L&T / Eqvivalent including panel mounting stand as required etc , as per actual site requirements. Termination and cabling 300 MM Armoured XLPE etc included. Complete job in all respects

SITC of Steel tabular poles as per 410 SP 15 with base plate of size 1.5’x1.5’ x 8 mm with GI rod for earthing etc . Including Cement BottoMing. Complete Job

Supply and laying of ACSR Dog conductor 0.05 with jumpering and termination works.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required.

SITC of copper bonded earthing 3mtr long with excavation and refilling works , Complete job in all respects.

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.