Sher E Kashmir University Of Agricultural Sciences And Technology Tender

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Foundations, footings, bases of columns, etc. for mass concrete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and laying River Bed Material (RBM) including digging, carrying, loading, watering and compacting

Provididng and fixing door frames size 2.1,0.98m with shutter complete shall be made fropm pressed CR steel four sided of size section 75 mmx 45mmx45m thick conforming to IS:5131994.2.08x0.915m door shutters made out of 32mm thick flush door frame with 4 nnos MS oxidised hings 100 mm long with providing and fixing windows size 1.2 m x 0.98 m outer dimension shall be made from pressed CR steel four sided of size 75mm x 45mm x 1.5mm conforming to IS:5131994. It will have 4 nos 75 mm MS oxidized but hinges welded on to frame with providing & fixing 60 mm thick puff panel with 0..5mm sheet both side having machine bounded puff of density (40+0.2) kg/m3. The panels should be made with overlapping male/female ends having telescopic joints arngs to provide a smoonth joint with providing and fixing of Tubular Truss made of MS rectangula hollow section 96 mm x 48mmx3.2mm structural steel conforming to IS4923 with a spacing 3.5m centre to centre supported on suitable columns to meet the stipulated design criteria. the structs shall be of 66mm x 33mx2.9mm with providing corrugated G.S. sheet roofing inlcuding vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and GI impet washers or with GI limpet washers filled with while lezad and including a coat of approv steel primer with providing ridges or hips of width 60 mm overall width plain G.S. isheets fixed with polymer coated J or L hooks, bolts and huts 8mm dia GI limpet and bitument washers complete 0.63mm tnhick with zince coating not less than 275 gm/m2 with providing and fixing false ceiling panels of sixe 1070mmx2150mmx30mm each made out of 0.5mm thick MS Sheet fals3e ceiling panels shall be placed into a suspended grid frame of size 610mmx1220mm made from GI 'L'&T sections of 0.63mm conforming to IS:277-1992 with amendment to having mon.GSM of 120gm/sqm.

Providing and fixing 6 amps to 32 amps rating 240 volts, 'L' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqired (category B)

Single Pole - 6 to 32 A

Light point on board with copper wiring in ISI marked PVC conduit wiring for 3 Pin 6 amp plug point with 1.5sqmm PVC insulated multistrand copper conductor cable including P/F of 3 Pin 6 amp socket outlet on switch board in surfaced recessed PVC conduit wiring system and 6 amp piano type swithc, earth the 3 pin as required with 01 No. PVIC insulated green colour wire.

Supply and fixing of following rating, 2P 230 volts MCB SPN single pole in the existing MCB DB complete with connections, testing and commissiong etc. as required

40 amps SPN

S/F of 4 feet long tubelight fixture with all necessaries complete.

Wiring for light / fan / exhaust fan / call bell point with 2x1.5 Sq mm sq.mm ISI marked PVC insulated copper conductor cable in surface / recessed ISI marked PVC conduit(2mm thick)including providing 5 amp switch and earthing complete as required.

Wiring for light plug with 2 x 2.5sq.mm. ISI marked PVC insulated copper conductor single core cable in surface / recessed ISI marked PVC conduit along with 1No. 0.75 mm copper wire for loop earthing required

Wiring for power plug with 2 x 4 sq.mm. ISI marked PVC insulated copper conductor single core cable in surface / recessed ISI marked PVC conduit along with 1No.0.75 Sq mm copper wire for loop earthing as required

Supplying and fixing of 10 way SPN double door DB box complete with all accessories with connection testing etc as reqd.

Supplying and fiixng of 180x100x60 mm deep M.S. box with phenolic laminated sheet cover in the front and providing and fixing of 15/16 Ampere switch socket inlcuding connection testing etc. as reqd.

Supplying and fixing of 2x6.0 sqmm PVC copper wire.

S/F of Angle holder alongwith 7 W LED connection testing.

S/F of street light 25 Watt LED including M.S. pipe bracket

Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories (with charcoal or coke and salt) complete as required for earthing and lightning protection.

Supplying and laying of 0.8 mm G.I. wire on surface from earth electrode to DB complete with all accessories.