Sher E Kashmir University Of Agricultural Sciences And Technology Tender

Development of bore well with compressor till sand free water is available, including all sorts of labour charges as required at site for completition of bore well.

P/f of 200 mm Shoe

P/f of 25 HP submersible motor .Stage 10, 80mm outlet 300 LPM Make Kirloskar CAT No: KS8D-2510 or equivalent in Crompton Greaves/KSB. Complete in all respects with pump section etc and . Etc

Providing of submersible 10 sq mm flat cable copper Havels

GI pipe C type with flange after every 10 ft length with welding etc with 4 lengths having perforation standard Dia 3 Inches with Heavy Make Jindal /Prakash Surya

Bend / elbow GI 100 mm complete

Supplying, installation, testing & commissioning of 30 KVA copper wound voltage stabilizer with following specification: 1. No. of input phases : Three 2. Frequency : 50HZ ± 3% 3. Capacity : 20 KVA fitted with Voltmeter 0-50 (2-Nos) AE make with roter switch, RYB indication primary and secondary brass terminals with oil 4. Input voltage: 90--200 5. Output: 220—200 PN, 400-440V P-P 6. Oil Immersed with oil topping complete with high cut and low cut protection. Make Chinar

MCCB 125 A Make 4 pole 36 KA Hager /Legrand

S/I of Changeover Panel Mounted Standard Make 100 Amp TPN

Supply installation testing and commissioning of star delta starter 25 HP range (compatible type), oil immersed with tank (oil filled) with features as below: 1. Semi Automatic type 3. Under voltage protection 4. Thermal overload protection 5. Single phase preventor protection Kilburn/Equivalent 6. Overload /under load protection The job includes mounting of starter on underneath panel board Complete with internal and external connections etc, Duly tested on load. Make Bentex

Fabrication, supply, installation, testing & commissioning of intdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr 900 mm x 900 mm) and depth 30 Cm (NS) made out of 2mm thick CRCA sheet having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 200 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd.

2 X 10 sq. mm (19mm) termination

Cable 7/16 AWG for star to delta connection

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. DSR CODE 7.3.1 for 35 Sq mm

Supply , laying of 1100 V 1 core 3.5 C 70 AYY XLPE 1100V XLPE un-armored cable in ground , walls ,ceiling trenches etc complete with clamp and saddle cable tags , markers , sand tiles /bricks etc

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Nuts and bolts of size 70 MM with gas cut washers as required

Flat Iron Clamps of size 70 mm

Threading of GI pipes for delivery section and cutting etc

32 mm PVC conduit

20 mm flexible conduit

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work complete in all respects. : Geological Survey Consultancy and fixing /finalization of location shall be borne by the contractor of his own.