Sher E Kashmir University Of Agricultural Sciences And Technology Tender

1:5:10 (1 cement : 5 fine sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)

1:3:6 (1 cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footings, bases of columns, etc. for mass concrete.

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cumof fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.

on bitumen surface @ 0.50 Kg/sqm.

Providing and laying of 25 mm thick open graded premix carpet (compacted) with specified graded stone aggregates for wearing course including loading of aggregates with FE loader and hot mixing of bitumen with filler and stone aggregates in hot mix plant, transporting the mixed material by tippers to paver at site of work and laying the mixed material with mechanical paver finisher to the required level and grade, rolling with power road roller to achieve the desired density and compaction including cost of priming coat/tack coat and seal coat, dressing of berms including cutting/filling with RBM up to 1 m width and 15 cm depth on both sides of the road surface including disposal of mulba to proper specified place including rolling with road roller and compacting (complete job) (Bitumen used shall be VG-30 and grading of mix sahll be as per the relevant clause of MORT & H) all complete including cost of bitumen and all sort of taxes.