Sher E Kashmir University Of Agricultural Sciences And Technology Tender

(a)1:4:8( 1 cement: 4 coarse sand: 8 graded stone agg/ 40mm nominal size) crushed aggregate)

(b)1:3: 6( 1 cement: 3 coarse sand: 6 graded stone agg/ 20mm nominal size) crushed aggregate) for mass concrete works.

Providing and laying in position D.P.C of specified grade of cement concrete 1:2:4 (1 cement :2 Coarse sand : 4 grade stone aggeregate using 20mm thick crushed stone agg. excluding the cost of centering, shuttering, finishing and reinforcement.(Upto Plinth Level)

Structural steel work in welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying of priming coat of approved steel primer complete in all respects..(All work at all levels complete.)

Providing and fixing M.S Round holding down bolts for trusses, 300 mm to 450 mm in length and 16 mm dia including nuts, washers , Plates and threading etc. complete.( All work at all levels complete.)

Providing form work including Centering ,shuttering , strutting, propping etc. using ply wood sheeting with water proofing ply board (12 mm min .thickness) and removal of the same for( All work at all levels complete.).-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying, filling with river sand mixed with boulders in 20 Cm layers including watering, compacting & dressing under flooring in ground floor complete in all respects.

Brick masonry with FPS bricks of class designation 75 in super structure up to floor V level in cement mortar 1:6 (1cement: 6 cement coarse sand).

Providing and laying in position . of specified grade of cement concrete 1:2:4 (1 cement :2 Coarse sand : 4 grade stone aggeregate using 20mm thick crushed stone agg. in Copings,string courses etc.including the cost of centering, shuttering, finishing complete upto F-2 level.

Providing wood work in frames of doors, windows, clerestory windows and other frames Wrought framed and fixed in positions (Its class Kail wood ).

Providing and fixing 35mm thick paneled or paneling and glazed shutters for windows and clerestory windows including I.S.I. Marked black enameled M.S. butt hinges with necessary screws excluding paneling, (which will be paid separately) ( Ist class kail wood)

Providing and fixing 35 mm thick panelled door shutters for doors only (Ist class Kail Wood) with ornamentals Kail Wood pannels of required thickness including neceaary stainless Steel Butt hinges /screws etc.design of shutter and pannels as per the instructions of Engineer encharge

Providing and fixing paneling or paneling/ glazing in paneled or paneled & glazed shutters for windows and clerestory windows (area of opening for panel inserts excluding portion in side grooves or rebates to be measured). Paneling for paneled or paneled glazed shutters.

Providing 3.5 mm thick panels of plain glass for glazing shutters (only panel area to be measured) including cost of teak wood beadings of required size complete.

Providing and fixing 40x5mm flat iron hold fasts 40cms long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement conc. blocks 30x10x15 cms 1:3:6 ( 1 cement: 3 coarse sand : 6 graded stone agg. 20mm nominal size).

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws ( ist.Class kail wood.)

P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for Ceiling , roof soffits etc. on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mmx 65 mm in sections or as required at site). including cost of necessary adhesive & cost of nails etc. Complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and Fixing ornamental cornice of 1/2x50 x 50 mm size of Ist class kail wood including cost of necessary adhesive & cost of nails etc. Complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing planed eves boarding of Ist class kail wood (250 x 35 mm ) N/S with necessary grooves and chamfer as per detailed drawing / as per the directions of Engineer Incharge (ornamental Eaves Boarding):-

Providing and fixing Track deck CRIL make or equivalent H.I. rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 255 mm T.C.T(total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 no stiffing ribs, effective water shedding and special male/female ends with full return legs on side Lapps for purlins support and anti-capillary flute inside Lapp. The sheets shall have a hot dip metallic coated of zinc and aluminum (150 gms /sm) zinc/aluminum coating mass total on both sides AZ-150 as IS -1397 ,550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M.P over 5 micron polyester back coat over 5 micron primer coats on both surfaces including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end Lapps etc (.measured for unit of laid area) (0. 50 mm thickness )

As per item ( above ) for plain 0. 50 mm total thickness S.M.P. coated Galvalume steel of similar material for ridge, capping pieces at apex of sky lights/hips, valleys etc. including notching, turning down of edges of capping between ribs etc .complete(500 mm to 1000 mm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.

Providing and fixing ist quality ceramic tiles in walls(Tile Cladding) etc. confirming to IS: 13753 of min. thickness 10 mm of approved make like NITCO, Orient, Somany, Kajaria or equivalent make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq. m including pointing in white cement mixed with pigment of matching shade complete (300mm x450 mm )

Providing and fixing black Granite ( gang saw cut mirror polished (pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc. of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of Required colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

Providing and laying Kota stone slab in finishing and pre-polished in flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete with base of cement mortar 1:4 (1 cement :4 coarse sand ) :(18 mm avg. thickness)

Providing and fixing black Granite Slab (black) ( gang saw cut mirror polished (pre-moulded and pre-polished), machine cut with requisite text of University at Main Gate of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. (including cost of all material, leads, lifts and carriages etc. upto site of work complete

15 mm thick cement plaster on rough side of single or half brick wall in (1 cement: 6 fine sand mix). Upto floor V level complete in all respects (including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Providing and applying cement based wall putty of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. (Birla make) (including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Supplying and fixing rolling shutters of approved make made of M.S Laths interlocked together through their entire length and jointed together at the end by end locks mounted on speicially designed pipe shaft with brackets ,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cms long wire springs grade No.2 and M.S Top cover of required thickness for rolling shutters complete as per specifications 80x 1.20 mm M.S laths with 1.20 mm thick top cover and ball bearings Complete in all respects.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work and wooden based surfaces complete.(including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces complete.(including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Providing and applying ceament based Wall Primer (ready made) of approved manufacturers Two or more coats on new work to prepare the surface for painting.(including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Painting on Walls /Ceilings with Acrylic emulsion paint of approved brand and manufacture to give an even shade (Two or More Coats) including all necessary scaffolding etc. (Including cost of all material, leads, lifts and carriages etc. upto site of work complete).

Providing and fixing steel Gate as per the approved design by consultant/Engineer Incharge including cost of necessary hold fasts and moving wheels , rails as required including two or more coats of steel paint over priming coat of approved colour/ shade all complete as per the directions of consultant/Site Engineer .

Providing and fixing hardware fittings of approved brand and of required type as approved by consultant .Heavy Grade Aluminium complete as per the specifications

a) Tower bolts 200 mm

b) Tower bolts 100mm

(b)Sliding door bolts/AL drops

c) Handles

125 mm

150 mm

Note:-The rates quoted are inclusive of all carriages (Mechanical/Manual) of materials from source to site work and all extra charges complete in all respects.