Sher E Kashmir University Of Agricultural Sciences And Technology Tender

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 coarse sand)

Applying 10mm Cement plaster ceiling of mix 1 : 4 ( 1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): (Imported wood)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (Imported wood35 mm thick)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. (Imported wood 35mm thick)

Providing and fixing panelled or panelled and glazed shutters for doors, with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws , Including panelling for panelled or panelled 25 mm to 40 mm thick, and necessary butt hinges and screws all complete as per direction of Engineer-in-charge . (Imported wood) 35 mm thick

Providing and fixing Track deck CRIL make or equivalent H.I. rib profiled sheets 1000 to 1020 mm cover width 28-35 mm high crests at 250 to 255 mm T.C.T(total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 no stiffing ribs, effective water shedding and special male/female ends with full return legs on side Lapps for purlins support and anti-capillary flute inside Lapp. The sheets shall have a hot dip metallic coated of zine and aluminum (150 gms /sm) zinc/aluminum coating mass total on both sides AZ-150 as IS - 1397,550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M. over 5 micron polyester back coat over 5 micron primer coats on both surfaces including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end Lapps etc (.measured for unit of laid area) (0. 50 mm thickness )

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges/Valleys plain (500 - 600mm)

Providing and fixing plained eaves boarding. 2nd class Kail Wood 300x40 mm (nominal size )

Providing and Fixing Imported wood panelling in Soffit including cost of Frame work underneath of imported wood: (Thickness 12mm)

Varnishing with varnish of approved brand and manufacture: Two or more Coats of glue sizing with Spar varnish.

Applying priming coat: With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more Coats on new work

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,.including fixing of Balasters upto 900mm all complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one meter or part thereof beyond 10 meters.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Structural Steel including cutting, hoisting Available and fixing in position.

new steel

Pointing on Brick Masonary in Lime Surkhi ( 1 Lime : 2 Surkhi ) Including finishing the joints with lime surkhi pigments to give a local heritage touch as per the directions of engineer incharge upto desired height complete in all respects( including all lead , lift, labour , materials, tools, plants complete as per specification and as directed by Engineer In Charge related to type of pointing :

Providing and fixing bright finished brass door latch necessary screws etc. complete. : 300x16x5 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :

150mmx 10mm

250x10 mm

Providing and fixing bright finished brass handles with screws etc. complete :

100 mm

125 mm

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.