Sher E Kashmir University Of Agricultural Sciences And Technology Tender

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Taking out doors, cupboards,windows and clerestory window shutters (steel or wood) including stacking of disposable material at location as per EIC. :Of area of 3 sqm. and below

Dismantling cement asbestos, or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials as per the directions of EIC..

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.

cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc complete job

Removing dry or oil bound distemper, wall putty,water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing . Cement mortar 1:4 ( 1 cement : 4 coarse sand);

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms including plastering partition walls.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 18mm thick Granite of any colour or shade.Area of slab upto 0.5 sqm.

Providing & fixing modular type labortory counter cupboards/cabinets made of mild steel coated with pure epoxy powder with thickness around 50 micron .The members such as top bottom & stiffeners should have a thickness of 0.8 mm & should be load bearing welded body construction type .shelf & each cabnet 0.8 mm thick adjustable in multiples of 150 mm. the shutters/ frame shall be provided with corrosion resistant. A magnet catcher 180 degree cam lock, higes ( two in each shutter) & handles to be made of SS 304 GRADE. It should have a sandvich door construction with shutter front & shutter cover with 1.2mm thick hinge stiffeners ,runners/fly wheels fixed with screws etc.Complete including sliding arrangement in Racks/Cupboards/cabinets shutter with stainless steel rollers to run inside a channel section.powder coated telescopic drawer channels 500mm long with necessary screws etc.complete as per directions of EIC.Including all fittings & fixtures.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. (A) PN-16 pipe , 25mm OD

Providing & Fixing on wall face un-plastcized Rigid PVC water pipes conforming to IS:13592 Type B including joining with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion including all fittings plain bend,tee,trap,door bend,collar etc complete as directed by EIC. (a)75mm dia

Providing & Fixing of CP bath fixtures/fittings of Approved brand preferably jaquar make (continental series) or equivalent as directed by EIC of following nominal bore or dia. (a) bib cock

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.