Rural Development And Panchayati Raj Department Tender

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and Fixing of 12 mm thick imported wooden wall panelling with skirting, chair rails, cornice over 12 mm thick ply wood sheets and necessary wood frame work battens of 50 x 25mm fixed with rawl plugs and drilling necessary holes for rawl plug including priming coat and polishing all complete job.

Providing and fixing of 3.5 mm thick float glass of approved brand and manufacture including wooden beading, nails and necessary items all complete job.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 x 600 mm

Brick work with common burnt clay F.P.S. (non-modualar) bricks of class designation 75 upto V level in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows, partitions and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) in K.D wood

Providing and fixing 12 mm ply for partitions in rooms over/ in wooden frame of 3" x 3", including beading, nails etc and priming coat inc all fittings and fixtures complete job.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. KD Wood

Finishing walls with 12 mm Cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand)

Providing & applying 2mm thick wall putty on walls

Applying Priming coat with ready mixed pink or grey primer of approved brand and manufacture on new wood work (hard and Soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete. (40mm thick)

Wooden Cupboard / Wardrobe Providing and fixing in position 450 mm deep wooden Cupboards / wardrobes of required size made of 19mm thick BWP board of approved make on top, bottom, sides, partitions, shelves, shutters. and 12 mm thick BWP ply of approved make at back of cupboard / wardrobe as per drawing. 1.0 mm thick laminate of approved make and shade on shutters & exposed sides of cabinets wherever required and 1.00 mm thick laminate shall be fixed on all unexposed inner faces of cabinet. Back side of cabinet shall be finished in two or more coats of synthetic enamel paint of approved make and colour, wooden lipping, suitable locking arrangement, all types of screws , fasteners, hinges / piano hinges, wooden screws, adhesives, polishing / painting of lipping, magnetic catchers, tower bolts, door handles/ knobs and all other types of necessary fittings etc. complete as per design, drawing and site condition as directed by the Engineer-In-Charge.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

PVC connection=18-24” size

PVC waste 32/40mm for Wash Basin

CP gratings with lid

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100 x 10

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 100mm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250 x 16 mm

Providing and fixing bright finished brass hard drawn hooks and eyes 150mm

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap, with 10 litre flushing cistern including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer- in charge. Long pattern W.C Pan of size 580x440 mm

P/f of information sign board made of iron with (50x50x6)mm vertical post with iron sheet of thickness 3 mm of 600 mm x 450 mm enclosed along perimeter with angle iron of (30x30x4)mm painted in white with nomenclature of work with black paint i/c all items and carriage and fixing of same in M-15 grade of cement concrete in (220x220x220)mm , the overall height of board should not less than 2000 mm.

electric heating points complete job

ii) electric lighting points complete job

ii) fans/dimmers points complete job

ii)switches boards/mcb etc (To be paid as per actual) complete job