Rural Development And Panchayati Raj Department Tender

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.Schneider /ABB /L&T /Honeywell/Eqt.make as per IS standard

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Polycab /Havells / Finolex/Eqt. as per IS Standard. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For 6A UPS & Light Circuit Point

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Polycab /Havells / Finolex/Eqt. as per IS Standard. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For 16A Power Circuit Point

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Polycab /Havells / Finolex/Eqt. as per IS Standard. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire For AC Circuit

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required Polycab /Havells / Finolex/Eqt. as per IS Standard. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire For DB Submain wire

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)

Supplying and fixing following size/ modules, Gl box alongwith modular base &cover plate for modular switches in recess etc. as required 3 Module (100 mmX75 mm)

Supplying and fixing following size/ modules, Gl box alongwith modular base &cover plate for modular switches in recess etc. as required 4 Module (125 mmX75 mm)

Supplying and fixing following size/ modules, Gl box alongwith modular base &cover plate for modular switches in recess etc. as required 12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. As required. Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. Double pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 40 amps

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 63 amps

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 40 amps

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 63 amps

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.Legrand / Siemens/ ABB /Schneider /L&T/Eqt. as per IS Standard. 100 amps

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Earthing with G.l. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.as required.

Supplying and laying 6 SWG G.l. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and laying earth connection from earth electrode with 6 SWG dia G.l. Wire in 15 mm dia G.l. pipe from earth electrode including connection with G.l. thimble excavation and re‐filling as required.

Supply, Laying and Commossioning of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.Polycab /Havells / Finolex/Eqt. as per IS Standard. 120 mm² AB (LT) Cable ( 3 x 120 + 1 x 25 + 1 x 95 mm²) XLPE (1.1kV, 3+1 C, Al) cable cost @461/mtr

Supply, Laying and Commossioning of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal. Polycab /Havells / Finolex/Eqt. as per IS Standard. 120 mm² AB (LT) Cable ( 3 x 120 + 1 x 25 + 1 x 95 mm²) XLPE (1.1kV, 3+1 C, Al)cable cost @461/mtr

Supply, Laying and Commossioning of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 120 mm² AB (LT) Cable ( 3 x 120 + 1 x 25 + 1 x 95 mm²) XLPE (1.1kV, 3+1 C, Al)

Supply, installation of LED batten 4ft 20-22W, IP20 made of extruded aluminium housing with high efficiency polycarbonate diffuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =110lumens/watt with Minimum system Lumens 4000 with maximum input power of 18 Watt. Life of LED: 50000 burning Hrs. @ L70B50 Lumen maintenance at 45deg C design ambient temperature, CCT of 6500K (SDCM5) , CRI 80, PF 0.95 & THD10%, an operating Voltage Range of 140 - 270 VAC. Driver efficiency should be more than 85%. Minimum Internal Surge Protection 3KV. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer. Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete as required, as per IS standard.

Supply, Installation, Testing and commissioning of 18 watt LED surface mounted Down lighters having Aluminium Body ,minimum lumens 100 lm/w ,the luminaries housing should be aluminium and the luminary optics shall have a high efficiency with transmittance ,average life of 50000 hrs operating temperature -10 C to + 45 C of Phillips/Bajaj/Trilex/WIPRO/Jaguar/Eqt.make as per IS standard, incl making of necessary Connections.. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. The fixture should have LM-79/LM-80 certificates and same are to be submitted before approving of fixture.

Supply, installation, testing and commissioning of 2 feet long LED Flat Batten Tube Lights 9-12 watt of Phillips/Bajaj/Trilex/WIPRO/Jaguar/Eqt.make as per IS standard incl making of necessary Connections as Mirror lights. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. The fixture should have LM-79/LM-80 certificates and same are to be submitted before approving of fixture.

Supply, Installation testing and commissioning of decorative type 4 blade 1200mm sweep Ceiling Fans of Crompton Greaves / Havel's / Usha /Bajaj make ( Sample to be got approved ) with 3 way ceiling rose of SSK make Complete incl making of necessary connections.

Supply, Installation testing and commissioning of 250-300 mm sweep Shutter type Exhaust Fans of Usha / Crompton Greaves / Havel's/BAJAJwith way ceiling rose of SSK make incl making of necessary connections and making of necessary space in walls / Windows as per site.(Samples are to be approved by Engineer Incharge before execution or third party to be nominated by department if required ) The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department.

Providing and fixing of 9 watt LED Bulb including supply fixing of holder and other acc. (Havell/ Equivalent as per ISI Standard).

Supply, Installation, Testing and Commissioning of AC/DC Bells of standard make with its batteries.

Supply/ installation/testing and commissioning of Wall / floor mounted compartmentalized , 415 volts TPN MCCB Main Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming 200 Amp TPN MCCB with breaking capacity of 50 KA thermo magnetic adjustable based of Legrand / Siemens/ ABB /Schneider /L&T make = 1 no 400 Amp TPN Bus bar Al Strips = 1 Set Digital meter and phase indicators= 1 set (2) Generator Incomer 100 Amp Four Pole Change over switch of Havells /Eq.make = 1 no 200 Amp TPN Bus bar Al Strips = 1 Set Digital meter and phase indicators= 1 set (3) Invertor / solar Incomer 125 Amps DP MCB (10KA) of of Legrand / Siemens/ ABB /Schneider /L&T make =1 No. 200 Amps P&N Aluminium Bus Bar = 1 Set Digital meter and phase indicators= 1 set Outgoing . 63 Amps DP MCB (10 KA) of Legrand / Siemens/ ABB /Schneider /L&T make = 6 No 40 Amps DP MCB (10 KA) of Legrand / Siemens/ ABB /Schneider /L&T make = 6 No 32 Amps Double Pole MCB (10 KA) of Legrand / Siemens/ ABB /Schneider /L&T make = 10 No The Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing clearly dimensions of panel with spacing of switchgear as per IE Standards ) and same is to approved by Engineer Incharge before manufacturing or to be referred to third party for approval if deemed necessary

Supply,Installation,Testing & Commissioning of 2 KVA Power Invertor (pure sine wave type) having generator compatible & provided and fitted with 2 No's of 12 Volts ,180 AH Tall tubular batteries of Exide make and battery rack to be fabricated of Angle iron (As per approved drawing ) for resting of batteries (complete job including cost of invertor ,batteries and angle iron rack ) .The specification are envisaged thereof. 1. Capacity of power invertor :2 KVA 2. Output waveform : Pure Sine wave 3. Operating input voltage ± 10V 4. Input frequency : 40 HZ to 60 HZ 5.Protection: Short circuit trip ,overload trip , Battery low & over charging protection ,over temperature protection ,AC Fuse trip/MCB Trip protection ,phase reverse protection. 6. Display : Tri colour LCD Display ,which shows main input voltage ,Battery voltage ,applied load in percentage ,Battery charging /Charged ,Battery Low / over charge ,short circuit ,overload ,over temperature. 7. Total harmonic distortion @ linear load : 3% 8. Output frequency :50HZ ± 1HZ 9. Battery voltage & AH :12 Volts /180 AH Tall tubular type Complete job including terminal connections of batteries and input and output leads of required size and length ,carriage and applicable taxes .The job further includes AMC of invertor and batteries for a period of three years reckoned from date of successful commission (Which includes replacement of defective items of UPS's /Batteries by fresh on during AMC period)

Supplying and fixing modular Indicator Lamp on the existing modular plate & switch box excluding modular plate as required.

Supplying and Fixing of Cat 5, PCB based RJ-45 UTP Information Outlet with face plates in recessed zinc chromate passivity MS box, cable bend limiting, strain relief caps for voice communication as per TIA / EIA 568-B.2-1 standard in existing floor recessed box/ recessed galvanized MS box complete as per specifications and as required.

Supplying, laying, and drawing of UPT 4-pair CAT 6-LAN cable drawn partly in existing recessed/surface conduits, partly in existing recessed/ surface mounted raceways or pvc conduits s per site requirement complete as per specifications and as required. Including cost of conduits for net points and CCTV Cameras. approved make as per IS Standrd.

Supply, Installation, Testing and Commissioning of 8 port network switch managed PLUS 2 SFP ports of D-Link/equivalent make.

Supply, Installation, Testing and Commissioning of lockable 4U with 5A strip and two fan for distribution mounting of patch panels , hubs, switches compete.