Public Works Department Tender

Providing and Fixing of suspended false celling 19mm thick ply board ribs finshed with satin paint fixed to hard wood framing of required section including adhesive, nails, secrew, wooden beading/profile and all necessary arrangements as per design drawing details Excl GST

Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on Perimetre wall angle pre-coated steel size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. Note: - Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC Excl GST

Providing wood work in frames of false celling, partitions etc sawn and fixed in position Budloo/fir wood including cost and carriage of all m,aterial from source to site of work Excl GST

Providing and fixing of 12mm thicjk AC4 laminated flooring in specifed pattern As per drawings in flooring/band on existing leveled flooring/screed free from dirt, oil and grease with approved adhesive and underlay 3mm thick foam cishion including wooden skirtings, corner profile etc, complete as per specification drawing and ti the satisfacation of EIC Excl GST

Providing and fixing of 10mm thick plybaord of approved quality with necessary nails etc completed including frame workm dixtures and beading as per requirement Excl GST

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 18 mm thick Excl GST

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Excl GST

Providing and fixing 30mm thickglazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws kail wood Excl GST

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. kail wood Excl GST

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) Incl coat and carriage of all material upto site of work complete job Excl GST

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) Incl coat and carriage of all material upto site of work complete job Excl GST

Providing and fixing of wall paper of approved sample as per pattern shown in drawing ( excluding base of POP, Putty, Primer) incl, of adhesive ect complete as per drawing, pattern, shades, specification and directions of EIC Excl GST

Providing & fixing of 1mm decorative laminated sheet with 19mm ply to ply base as approved and required section, as per pattern shown in drwaing in cluding finishing of gap, joints provision of MEP fixtures, adhesive, nails, secrew and all necessary fixing arrangements etc. completed as per detail drawing, pattern, sghade, specification and direction of EIC Excl GST

Providing & fixing of 1mm decorative laminated sheet over 12mm ply to ply base as approved and required section, as per pattern shown in drwaing in cluding finishing of gap, joints provision of MEP fixtures, adhesive, nails, secrew and all necessary fixing arrangements etc. completed as per detail drawing, pattern, sghade, specification and direction of EIC Excl GST

Providing & fixing of 12mm MDF base with wood molding slats finished in duco paint,as per pattern shown in drwaing in cluding finishing of gap, joints provision of MEP fixtures, adhesive, nails, secrew and all necessary fixing arrangements etc. completed as per detail drawing, pattern, shade, specification and direction of EIC Excl GST

Providing & fixing of 1mm decorative laminated sheet over 19mm MDF base with MDF slats of required width and thickness finished in white deco paint in required sections, as per pattern shown in drwaing in cluding finishing of gap, joints provision of MEP fixtures, adhesive, nails, secrew and all necessary fixing arrangements etc. completed as per detail drawing, pattern, sghade, specification and direction of EIC Excl GST

Providing and fixing of 19mm MDF vertical slats as per drawing detailed and spacing including all necessary fixing arrangements and finished with glossy white ducco paint, two coats as directed by EIC Excl GST

Providing and fixing of Khatam BANDI finished wall mounted raised TV panel Boxing, finished over 19mm ply base made & hardwood framiong of required section, as per pattern shown in drawing including finishing of joints, making of groove & light cove, making provision of MEP fixtures, adhesive, nails, secrews and all necessary fixing arrangment etc complete as per detailed drawing, pattern, shade,specification and directed by EIC. Excl GST

Providing and fixing of headboard Accent wall with 19mm rubber wood, including ornamental carving asd per design schedule for the required section and conrnice of required size along edge over 12mm plyboard underneath finished with clear coat PU polish of required shade till smooth surface is required as per specified shade complete job as directed by EIC Excl GST

Providsing and fixing in position wardrobe/cabinet made of 19mm ply to ply finished with 1mm decorative laminated and 25mm wide metal strip as per design details including inner shelves, inner mica, shutter, supporting ply backing supporting hardware and accessories, framing, secrew, nails, withrequired/specified adhesive, edge tape, making opening for profile light drivers and installation of strip casing and necessary fixing arrangments as required etc complete as per detailed drawing, pattren, shade, specification and directied by EIC Excl GST

Providing and fixing of 25mm thick wall mounted console shelf along TV unit, built with boiling water proof (BWP) board, finishingh with high glass Duco paint of required shade, mounted with nails/screws & necessary fixing arrangements as required.Excl GST

Providing and fixing of 19mm thick MDF curtain pelmet with edge detail finished with deco paint of required shade as per drawing complete & as directed by EIC Excl GST

Supply and installation of full length mirror suspended/Wall mounted as directed by EIC Excl GST

Providing and making of king size bed (6X6'-6") in 19mm plyboard and necessary wooden framework finished with laminated top incl faux leathwer upholstery with cushion over 12mm thick ply baord in the back or approved sample as per detailed drawing, pattern, shade, specification and approval of Designer/EIC Excl GST

Providing and fixing of side table 18" deep in 19mm Ply-Ply finished in laminated top of approvwed sample as per the detail drawing, pattern, shade including drawers, inner mica, shutter, supporting hardware and accessories nails with required adhesive edge tape, specification and as directed by Engineer incharge. Excl GST

Providing and fixing of 6" to 8" deep 12mm CNC Carved BWP panel measuring hung on MS framing of required section , spacing as per pattern showing in drawing including finishing of joints, making provision of MEP fixtures, adhesivce, nails , secrew and all necessary fixing arrangments finished with glossy ducco paint, important to ensure installation as detachable casing for maintenance of radiator Excl GST

Providing and fixing of wall panel made of 19mm rubber baord CNC carved as per design for the required section and crown moulding along edge, finished with clear coat PU polish till smooth surface is required, as per the specified shade over 6mm plyboard underneath complete job. Excl GST

Providing and fixing 5mm thick wall mirror accent panel unsing relevant mirror tile size and pattern as per design incl. cost of necessary bevelling framing, adhesive, supportive accesoried,complete job. Excl GST

Providing and fixing of 19mm MDF drop box of required size finished in gllossy duco finish wall mounted unsing secrew/nails and necessary fixing arrangments. Excl GST

Providing and fixing in position study table made of 19mm MDF and 60cm deep finished with glossy white deco of approved quality. Rate to be inclsive of specified paint, shelves, supporting ply , back framing secrerw, nails with required /specified adhesive . moulded edges. chamophered edge, making groove, malking opening/holes for equipment, labour, scaffolding & necessary fixing arrangments as required etc., complete as per detailed drawins, pattern, shade, specification and as directed by Engineer incharge. Excl GST

Providing and fixing in position study table made of 19mm HDHMR board(OSL) and 1mm thick laminated on the top of approved quality Rate to be inclsive of specified paint, shelves, supporting ply , back framing secrerw, nails with required /specified adhesive . moulded edges. chamophered edge, making groove, malking opening/holes for equipment, labour, scaffolding & necessary fixing arrangments as required etc., complete as per detailed drawins, pattern, shade, specification and as directed by Engineer incharge. Excl GST

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade, Two or more coats on new work complete excl GST

Finishing wood work with PU polish incl, sanding, filler etc to achieve smooth finish complete one or more coats as per direction of EIC excl GST

Finishing of celling( existing and new installation) with satin paint two coats, including necessary additions of sanding, wood filling and putty filler to achieve a smooth finish as directed by EIC Excl GST

Providing and fixing 12mm MDF board with CNC cutting as per design and fixed on 4" raised ply to ply base board frame as shown iun drawing including finishing of joints, adhesive, nails, secrew finished with glossy ducco paint complete job Excl GST

Providing and fixing of 50mm dia stainless steel railing of 304 grade of hollow tube 1.6mm thick of jindal / salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc complete and fixing stainless steel balusters upto 900mm height and SS tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws, etc in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite / marble floors and fastening with lead grouting if required, complete in all respects all inclusive main bullaster posts. Excl GST

King post Excl GST

Providing and fixing of electro coated aluminum work including glazing with glass panes of 5mm thickness (weight not less than 13.75 Kg/Sqm) and 12mm thick decorative type pre-laminated particle / MDF board (both side laminated) in partitions / Door openings and necessary hardware fittings including leaf spring machine with extruded built-up tubular sections / appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixed with raw plugs and screws including necessary filling up of gaps at junctions, at tops, bottoms and sides with required PVC/neoprene felt etc all complete as per directions of Engineer I/C for fixed portion, Electro coated aluminum minimum thickness of coating 50 microns complete as per approved drawings and sample to be approved by the EIC. Excl GST

Supply and fixing rolling shutters of approved make, of required size M.S laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire spring manufactured from high tensile steel wire of adequate strength confirming to IS: 4454 part-1 and M.S top cover of required thickness for rolling shutters 80x0.90mm M.S laths with 0.90mm thick top cover complete. Excl GST

Providing and fixing of brass hardware fitting of standard qua,lity incl cost of necessary secrew complete.Excl GST

100mm T. Bolt/Handle

Aldrop

Providing and fixing precoated galavanised sheet roof Gutter 0.50mm, 600mm over all grith (+0.05%) total coated thickness, Zinc coating 120grams per SQm as per IS;277, in 240 mpa steel graded,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15'-18' microns unsing self drill/self tapping secrews complete Excl GST

Providing and fixing of PVC 3" down take pipes including clamping, coupling necessary fittings etc complete job as directed by EIC Excl GST

Providing and fixing of snow guard on roofs in built up sections including all necessary fittings and fixtures complete job Excl GST

Providing and fixing of 1' back lit acrlyic signage complete job Excl GST

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.Excl GST

Add GST 18% by applying factor @ 0.219512 on basic total Amount of items.

Total Construction Cost

Consultancy Charges

Add Consultancy/Architect charges @ 1.20% ( including GST)