Public Works Department Tender

Supply, installation, testing and commissioning of 15Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). commericial series

Supply, installation, testing and commissioning of 18 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro). commercial series

Supply, installation, testing and commissioning of 100Watt LED Flood lighting luminaries having aluminum body, minimum 100im/w,the luminary housing should be aluminum and the luminary optics shall have ahigh efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/Wipro).

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans , incl. cost of ceiling rose (if required) and making of necessary connections. (Havells/ Philips/ Crompton/ Anchor). including 02 module fan regulator (Legrand/Schneider/Anchor Roma plus

Supply, installation, testing and commissioning of 200 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/ Anchor).

Supply and fixing of modular blanking plates on modular switch plates, excluding cost of switch plates.

Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, including cost of conduits(Havells/ Polycab/ Finolex/ Anchor).

2 x 4 sq.mm + 1x 4 sq. mm Inverter sub main

2 x 10.0 sq.mm + 1 x 6 sq. mm Lighting sub main

4 x 16 sq.mm + 1 x 6 sq. mm Heating sub main

Supply and fixing of deep / concealed boxes made of heavy gauge sheet in RCC slabs

Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs

Supply and fixing of 8 way (4 + 24), Double door surface/ recess mounting , vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.(Havells/Legrand/Scheneider /ABB )

Supply and fixing of 8 way , Double door surface/ recess mounting , vertical type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.Havells/Legrand/Scheneider /ABB )

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. (Legrand/ / Schneider/ABB/L&T).

Supply, installation, testing and commissioning of 40A DP rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections.Legrand/Scheneider/ABB/l&T)

Supply, installation, testing and commissioning of 63A DP MCB rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. ( Legrand// Schneider/ABB/L&T).

Supply, installation, testing and commissioning of 63A TPN MCB rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections.Legrand/Scheneider/ABB/l&T)

Supply and fixing of single pole blanking plates on existing MCB distribution boards.

Supply, installation, testing and commissioning of wall/floor mounted compartmentalized ,415 volts, TPN MCCB main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: Legrand/Scheneider/ABB/l&T) 1.NORMAL INCOMING 320A TPN MCCB 50KA 01 no. Icu = Ics 100% 600A TPN bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 200A 4 pole change over switch 01 no. front operated. 400A TPN bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 3.INVERTER/ SOLAR INCOMER 125A DP MCB 10KA 01 no. 200A P&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. OUTGOING 125A TPN MCCB 25KA 03 no. for heating. 63A DP MCB 10KA 03 no. for lighting 40A DP MCB 01 no for solar/ inverter lighting 32A DP MCB 02 no for motor and street/security lights. The contractor has to submit the test certificate of main switch gear.

Earthing with GI earth pipe 4.5 mtr. Long 40 mm dia. Including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.

Providing and fixing of 25mmx5mm GI strip on surface or in recess for extending the earthing from earth electrode to controlling panelin one rim to be laid through required dia. of PVC conduit.

Supply, laying, connecting and commissioning of 95 sq. mm 3.5 core XLPE insulated and steel armored 1.1 KV grade Aluminum LT cable from LT panel to LT pole, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). (Havells /Polycab/RR)

Supply, laying, connecting and commissioning of 50 sq. mm 3.5 core XLPE insulated and steel armored 1.1 KV grade Aluminum LT cable from LT panel to Generator and main panel to sub distribution panels, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).(Havells /Polycab/RR)

Supply, installation , testing and commissioning of 50 KVA, 3-Phase, 415V,LT, Unbalanced AVR of Essentials, KE, ALBA, Chinar make, operating from input voltage of L-L=155-460V & L-N=90-265V, thereby producing the output voltage of 415V +_2% Phase to Phase and 230V +_2% Phase to Neutral. The AVR should have inbuilt Over voltage protection, Under voltage protection & Over loading with TDR. The stabilizer shall be servo controlled automatic, ONAN cooled and provided with first filling of fresh filtered transformer oil having required di-electric strength. The stabilizer shall be capable of smooth operation up to 10% un-balanced in the load currents complete with servo bye pass system consisting of 200A four pole change over switch, 200A four pole MCCB 35KA 01 no. and required bus bar, incl. wall mount panel type sheet steel enclosure. The supplier has to give guarantee for any manufacturing defect with three servicing of the equipment for two years reckoned from commissioning. The job also includes all applicable taxes, carriages , loading and unloading.

Supply, installation, testing and commissioning of 1450-1650VA Power Inverter having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC battery trolley for resting of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes.

Supplying and fixing of modular switch /Socket on existing modular plate and switch box incl.Connections etc as required

3-pin 5/6A Socket

6A Indicator