Public Works Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Road Construction
Building Construction
Eprocure
Opening Date11 Oct 2024
Closing Date31 Oct 2024
Tender Amount₹ 15,36,42,468
Costs
EMD
₹ 30,72,849Document Cost
₹ 11,000Tender Fee
Refer Documents
Summary
Construction Of Transit Accomodation For Kashmiri Migrant Employees
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_259551_1Bid Award Id
ViewTender No
22 /ZNP/RnB/e-Tendering/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)including all carriage complete
2160
669
1445439.6
... More
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment)Screened through sieve of I.S. designation 4.75 mm including all carriage complete
120
485
58291.08
... More
Fine dressing of ground.
4800
3
15753.6
... More
Supplying and staking of Fine sand, incl. royalty and carriage. Reduce payment by 5% by stack measurements.including all carriage complete
144
1221
175915.87
... More
Spreading of sludge, manure, good earth in required thickness , incl. mixing of good earth , sand and manure.
2424
46
113814.07
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) 17.10.1 In rows 5 cm apart in either direction
4800
15
75681.6
... More
Plantation
-
-
-
... More
a) Deodar 2'-0" high
450
206
92768.4
... More
b) Cypress 2'-0" high
400
123
49476.4
... More
c) Ornamental plum
200
144
28861.2
... More
d) Olander
300
123
37107.3
... More
Compound Walling Part B
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
2160
225
486432
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1728
191
330894.72
... More
Providing and laying stone soling hand packed.incl all leads lifts, carriage complete.
270
700
189247.05
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)Including all cost and carriage complete.
135
4801
648201.56
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete.
732.8
8477
6212345.71
... More
Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete.
342.73
5266
1805023.19
... More
Centering and Shuttering including Strutting, propping etc removal of form work
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
3341.85
251
839031.6
... More
Columns, pillars, piers, abutments, posts and struts.
7929.46
651
5162617.66
... More
P/L and placing high strength deformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more.Including all cost and carriage complete.
102592.35
108
11081512.69
... More
Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) upto floor level V including curing complete incl all carriages complete,
427.42
8225
3515530.35
... More
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)incl all carriages complete
7207.2
235
1697410.92
... More
Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (Grill Work)
18000
121
2181024
... More
Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface.
8400
58
492349.2
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
8400
162
1364008.8
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution(Grill Work)
720
130
94092.48
... More
Part B1 Dormitory
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
326.99
225
73638.15
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
56.68
700
39727.86
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.Including all cost and carriage complete.
80.94
1056
85481.22
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.Including all cost and carriage complete.
277.5
191
53138.48
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including all cost and carriage complete.
23.13
4800
111025.71
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete.
114.8
7067
811369.09
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete.
131.69
8850
1165536.3
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete.
40.71
6018
244992.82
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)Including all cost and carriage complete.
47.76
5213
248983.72
... More
Centering and Shuttering including strutting, propping etc and removal of form for
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
75
251
18831.98
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
176.59
551
97388.86
... More
Suspended floors, roofs, landings, balconies and access platforms. (Steel plates only)
555
629
349512.36
... More
Edges of slabs and breaks in floors and walls, Under 20 cm wide
192.96
229
44359.96
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
520.42
506
263536
... More
Columns, pillars, piers, abutments, posts and struts
115.2
651
75003.03
... More
Stairs (excluding landings) except spiral staircases.
133.59
746
99696.21
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
9250
121
1120804
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
33276.26
108
3594335.22
... More
Providing & fixing corrugated pre colour coated G.S sheet roofing with polymer coated J or L hooks, nuts,bolts washers (0.50 mm thick) complete job using approved brand as directed by Engineer incharge
286.75
907
260101.46
... More
Providing ridges or hips of width 60 cm over all width plain pre colour coated G.S sheet fixed with polymer coated J or L hooks.bolts,nuts (0.63mm)
46
618
28448.93
... More
Valleys
40
618
24738.2
... More
Providing and fixing G.I eves boarding sheets of required thickness as directed by EIC.
76.22
288
21998.01
... More
Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) upto floor level V including curing complete incl all carriages complete,incl all carriages complete,
156.71
8225
1288941.32
... More
Providing and fixing of imported K.D wood work in frames of doors, windows, clerestory windows, partitions and other frames, wrought framed and fixed in position with hold fast, lugs or with dash fasteners of required dia and length including all carriage of materials as involved upto site of work as directed by EIC complete.
5.65
41230
232951.27
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Kiln Dried imported wood 35 mm
46.48
2143
99652
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Kiln Dried imported wood ) complete all inclusive.
46.48
1979
91986.48
... More
Providing and fixing (35mm thick) panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln Dried imported wood
57.54
1979
113874.82
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln Dried imported wood
61.6
1814
111750.65
... More
Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood / steel work complete all inclusive.
572.77
56
32438.26
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
572.77
115
66213.36
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
408
181
74174.81
... More
Providing and Fixing of hardware fittings of approved brand including necessary screws etc.
-
-
-
... More
Tower Bolts 100mm
372
82
30675.49
... More
Tower Bolts 150mm
72
98
7124.62
... More
Handles 100mm
186
65
12270.23
... More
Handles150mm
72
70
5046.62
... More
L-Drop 200mm
36
292
10538.46
... More
Eye Hook
93
24
2300.63
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 including all carriages complete
1264.42
270
341790.43
... More
12mm Cement plaster of mix: 1 : 6..including all carriages complete
596.62
234
140011.8
... More
6mm cement plaster to ceilings of mix 1:3 (1 cement : 3 fine sand) including all carriages complete
545.93
212
116172.81
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
1617.2
118
191565.43
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
1617.2
112
181415.88
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
596.62
162
96880.35
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 over 75 mm bed of dry brick ballast 40mm nom. Size well rammed consolidated and grouted with fine sand incl. finishing the top smooth cutting levling etc complete. Including all cost and carriage complete
81.33
502
40846.04
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In all colours, shades
92.18
1026
94623.78
... More
Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.Including all cost and carriage complete
312.42
448
140167.86
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
193.15
1077
208153.51
... More
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)
including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
675.76
1223
826603.82
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling /grouting and finishing complete as per direction of Engineer-in-charge.
675.76
210
142140.03
... More
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 18mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete all inclusive (Udaipur green marble)
101.01
1747
176498.01
... More
Providing and fixing of Fixed Glass Panes including wooden fillets, nails etc complete job (3.5 mm thick float glass).
43.99
717
31558.73
... More
Sanitary
-
-
-
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge in all kinds of soils
104.31
164
17129.79
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
1.79
783
1402.24
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including all cost and carriage complete
1.79
4800
8592.13
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).Including all cost and carriage complete
11.57
7623
88205.16
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including all cost and carriage complete
4.78
8850
42305.9
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
415.58
108
44888.87
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
51.7
551
28510.69
... More
Suspended floors, roofs, landings, balconies and access platforms. (Steel plates only)
28.62
629
18022.56
... More
Edges of slabs and breaks in floors and walls, Under 20 cm wide
17.12
229
3935.75
... More
Dry random rubble masonry with hard stone in foundation and plinth:including all carriages complete
36.81
2656
97791.91
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN- 16 pipe.
-
-
-
... More
a. 25mm OD(SDR-7.4)
300
288
86583.6
... More
b. 32 mm OD
230
356
82037.09
... More
c. 50 mm OD
250
476
119234
... More
Providing and fixing (PPR) Ball valve including fittings complete.
a. 25mm OD.
1
346
346.34
... More
Providing and fixing (PPR) Ball valve including fittings complete.
b. 40mm OD.
2
437
874.08
... More
Providing and fixing (PPR) Ball valve including fittings complete.
c. 50mm OD.
2
515
1030.76
... More
Providing and fixing in position PVC floor traps including all fittings complete.
a. 100mm dia.
20
206
4123.04
... More
Providing and fixing in position PVC floor traps including all fittings complete.
b. 75 mm dia.
20
164
3298.42
... More
Providing and fixing PVC cowl 50mm dia including all fittings complete.
4
82
329.84
... More
Providing and fixing PVC stay and clamps for PVC pipes.
a) 100mm dia.
20
28
577.22
... More
Providing and fixing of bend of required degree including all fittings complete.
a) 100mm dia.
6
206
1236.91
... More
Providing and fixing of bend of required degree including all fittings complete.
b) 75 mm dia.
6
164
989.53
... More
Providing and fixing of plain bends including all fittings complete.
a) 100 mm dia.
20
164
3298.42
... More
Providing and fixing of plain bends including all fittings complete.
b) 75mm dia.
20
144
2886.12
... More
Providing and fixing of Tee - junction all inclusive.
a) 100mm dia.
20
247
4947.64
... More
Providing and fixing of Tee - junction all inclusive.
b) 75mm dia.
4
206
824.61
... More
Providing and fixing PVC reducer 100 – 75mm dai including all fittings complete.
6
206
1236.91
... More
Providing and fixing of water heater geysers of approved brand and manufacture with ISI certified mark make of 50 litre capacity including all fittings/ fixtures as required complete.
20
14842
296858.26
... More
Providing and fixing 15 mm nominal bore C.P. brass Health Faucet of approved quality conforming to IS : 8931 complete all inclusive.
20
1154
23088.98
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete all inclusive.
56
510
28593.82
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg complete all inclusive.
7
1816
12717.75
... More
Providing and fixing C.P brass single long swing type lever wall sink mixer including fittings complete all inclusive.
1
5967
5967.35
... More
Providing and fixing C.P brass double lever wall mixer with concealed shower including all fitting and accessories complete all inclusive.
20
3945
78912.34
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid complete all inclusive.
20
4856
97127.9
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap..
7
3394
23760.86
... More
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
7
2020
14140.44
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x510mm bowl depth 200mm complete all inclusive.
1
3840
3840.84
... More
Providing and fixing PVC waste pipe 32mm.
8
120
963.74
... More
Providing and fixing 8mm dia C.P / SS jet with flexible tube upto 1 Mtr long complete.
20
361
7226.52
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
20
1398
27971.64
... More
Providing and fixing CP towel rail complete with brackets fixed with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long.
20
641
12830.88
... More
Providing and fixing of CP grating 100mm dia including all fittings complete.
23
45
1036.5
... More
Providing and fixing of PVC connections 15mm dia including all fittings complete.
66
104
6874.82
... More
Providing and fixing of Master trap of required size and shape as including all fittings as directed by EIC complete all inclusive.
1
519
519.5
... More
Providing and fixing 2HP motor Crompton / Havells or equivalent make including all fittings and fixtures as required complete as directed by EIC, all inclusive.
1
14842
14842.91
... More
Constructing masonary chamber of specified of specified size, in brick work work with common burnt clay bricks of class designation 7.5 in cement mortar 1:4 and RCC top slab 1:1.5:3 mix including necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement complete as per standard design and size as directed by EIC complete.
20
4123
82460.62
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5000
7
38345
... More
Providing and Fixing soil waste and vent pipes including all fittings complete (PVC S&S Pipe)
-
-
-
... More
a) 100mm dia.
120
288
34633.44
... More
b) 75mm dia.
120
247
29685.84
... More
c) 150 mm dia.
130
371
48239.49
... More
Electrification Facility to Dormitory(G+2)
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
250
836
209243.75
... More
Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit.
950
275
261648.05
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.)
64
371
23748.67
... More
Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1050
226
238105.35
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.)
64
486
31137.15
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
30
330
9920.01
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/ Anchor/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
(a) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
95
636
60476.62
... More
(b) 2 X 10sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
95
470
44652.47
... More
(c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
95
362
34390.19
... More
Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete
-
-
-
... More
25mm
150
119
17935.2
... More
Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends.
50
28
1443.05
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
15
32
494.76
... More
Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.)
15
70
1051.38
... More
Supply installation testing and commissioning of AC/DC Bell including Bell push and battries GM/ standard make
3
371
1113.22
... More
Sub Head-2 - Fixtures and Fittings
-
-
-
... More
Supply installation testing and commissioning of 12 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation..
30
865
25975.11
... More
S/F testing and comm. Of 20 Watt + 4 ft. wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with minimum system lumen efficacy of 100 lm/W and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation.
150
371
55660.95
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton make, sample to be approved before installation..
50
1855
92768.2
... More
Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tivsha/schneider Livia /Havell Coral make.
50
263
13193.7
... More
Supply installation testing and commisioning of 250-300 mm Sweep exhaust Fan Shutter type of havell/Usha/Crompton/Equivalent make as directed by Engineer in charge, including making of space in wall. Window as per site requirement and necessary connections.
12
1525
18306.26
... More
Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door
6
4920
29522.56
... More
S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ L&T ./equivalent make as directed by engineer incharge.
-
-
-
... More
a) 6-32 Amp SP MCB
150
211
31664.85
... More
b) 40-63amp DP MCB
15
1030
15461.37
... More
Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound.
2
10307
20615.16
... More
S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.
-
-
-
... More
a) 120 sq.mm 3.5 core
50
1071
53599.4
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required
-
-
-
... More
160 mm dia (OD-160 mm & ID-135 mm nominal)
50
297
14884.15
... More
Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.
4
5359
21439.76
... More
Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 3 No.
22
1855
40818.01
... More
Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. Normal Incoming
-
-
-
... More
a)250A 4P MCCB 50 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make.Normal INCOMING:
1
19378
19378.25
... More
b) 4 No. of Aluminium Bus Bar of 400 Amp.
1
2102
2102.75
... More
c)Digital meters and phase indicators -1 set.
1
989
989.53
... More
d) onload Change over switch 160 Amp for generator.Front operated.
1
12863
12863.86
... More
e) 4 No. of Aluminium Bus Bar of 250 Amp.
1
1525
1525.52
... More
c)Digital meters and phase indicators -1 set.
1
989
989.53
... More
Inverter/ Incommer
-
-
-
... More
(a) 100 amp DP MCB
2
3710
7421.46
... More
(b) 200 Amp 2 strip bus bar
1
1113
1113.22
... More
c)Digital meters and phase indicators -1 set.
1
989
989.53
... More
c) space for 12 way MCB's
1
700
700.92
... More
Outgoing
-
-
-
... More
b)100 amp DP MCCB 10 K Legrand/ Shinider/ABB make, sample to be approved before installation..
3
2515
7545.15
... More
c) space for 24 way MCB's
1
700
700.92
... More
Construction of Security Picket
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
120
225
27024
... More
P/L stone soling nallah hand packed in bed including all carriages etc including all cost and carriage complete
12.5
700
8761.44
... More
Providing/ laying position cement concrete of specified grade excl. cost of centering and shuttering all work upto plinth level 1:4:8 ( stone agg. 40mm nom. Size)including all cost and carriage complete
12.5
4970
62136.14
... More
Providing/ laying in position Reinforced cement concrete of specified grade excl. cost of centering and shuttering all work above plinth level 1:1.5:3 ( stone agg. 20mm nom. Size)including all cost and carriage complete
34.5
7238
249728.01
... More
Providing/ laying in position Reinforced cement concrete of specified grade excl. cost of centering and shuttering all work above plinth level 1:1.5:3 ( stone agg. 20mm nom. Size)including all cost and carriage complete
41.7
8647
360611.97
... More
Providing/ laying in position cement concrete of specified grade excl. cost of centering and shuttering all work upto plinth level 1:2:4 ( stone agg. 20mm nom. Size) incl all carriages and costs.
11.9
6188
73646.93
... More
Providing/ laying in position cement concrete of specified grade excl. cost of centering and shuttering all work upto plinth level 1:3:6 ( stone agg. 20mm nom. Size) incl all carriages and costs.
5.95
5384
32035.06
... More
Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) upto floor level V including curing complete incl all carriages complete,
73.15
8224
601656.48
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.including all cost and carriage complete
38.25
191
7324.49
... More
Supplying and filling of RBM in plinth incl. spreading, dressing,watering with all carrriage etc complete
24.85
700
17417.74
... More
Reinforcement for RCC work incl. Straightening , bending,binding and placing in position all complete using approved brand steel ( sail/tata tiscon/jindal panther etc)or equivalent make.
4142.9
108
447495.34
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.50 mm thick with 20mm nominal size stone aggregate. Including all cost and carriages complete
73.1
512
37486.12
... More
Providing and fixing of 35mm wide glass strips in level incld all carriage and wastages complete
112.5
28
3246.86
... More
Centering and shuttering including strutting, propping etc and removal of same
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
169.2
251
42480.71
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
127.4
506
64514.21
... More
Columns, pillars, piers, abutments, posts and struts.
156
651
101566.61
... More
Suspended floors, roofs, landings, balconies and access platforms. stairs, slab edges.
159.3
629
100314.24
... More
Structural steel work in built up sections incl. cutting, hoisting, fixing in position i/c providing & applying priming coat of approved steel primer(using brands as directed by engineer incharge) including eaves boarding with 14 gauge sheet and soffits where ever requred complete as directed with frame complete Stairs, doors windows included with all carriage and painting with enamel paint .
2662.1
121
322561.33
... More
Providing & fixing corrugated pre colour coated G.S sheet roofing with polymer coated J or L hooks, nuts,bolts washers (0.50 mm thick) complete job using approved brand as directed by Engineer incharge
69.75
907
63267.92
... More
Providing/Fixing ridges or hips of width 60 cm over all width plain pre colour coated G.S sheet fixed with polymer coated J or L hooks.bolts,nuts (0.63mm)
90
618
55660.95
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6. Including all cost and carriages complete
342.2
274
93887.02
... More
12mm Cement plaster of mix: 1 : 6..including all carriages complete
429
238
102412.6
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)Including all cost and carriages complete
78.8
216
17087.54
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
342.2
118
40535.3
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 over 75 mm bed of dry brick ballast 40mm nom. Size well rammed consolidated and grouted with fine sand incl. finishing the top smooth cutting levling etc complete . Including all cost and carriages complete
48
522
25062.77
... More
Finishing outside walls with water proofing paint of required shade (snowcem) on new work two or more coats of approved brand
429
78
33851.1
... More
Electrification of Security Picket
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
30
836
25109.25
... More
Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit .
75
275
20656.43
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /ABB Tvisha make./schneider Leiva /Crabtree athena make.)
10
371
3710.73
... More
Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
75
226
17007.53
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.)
10
486
4865.18
... More
Sub Head 2 Fixtures and Fittings
-
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton make, sample to be approved before installation..
10
1855
18553.64
... More
Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tvisha make./schneider Livia/Havell Coral make.
10
263
2638.74
... More
Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. And 12 watt LED Lamp, Philips/Trulux/Wipro make / sample to be approved before installation..
20
226
4535.34
... More
Supplying and fixing Double door following way, single pole and neutral, sheet steel, MCB distribution board ( Indo Asian/ legrand/ Schinider/SSK make) , 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way,
5
1030
5153.79
... More
S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ ABB./equivalent make as directed by engineer incharge.
-
-
-
... More
a) 6-32 Amp SP MCB
15
211
3166.49
... More
b) 40-63amp DP MCB
5
1030
5153.79
... More
S/L , testing and commissioning of PVC XLPE insulated alluminium unarmoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.
-
-
-
... More
a)10 sq.mm 2 core
250
90
22676.75
... More
Internal Roads
-
-
-
... More
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
14870.63
134
1994850.4
... More
Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade.
14870.63
2
36507.4
... More
Providing and laying granular sub-base material having P.I not more than 6, incl. spreading in layers not exceeding 150mm compacted thickness and consolidation by 8-10 Ton power road roller at OMC to achieve at least 98% of max dry density as per IS..2720 to the required and grade. Grading-I as per specifications with CBR value not less than 20.incl all leads lifts, carriage, taxes Octroi etc..
2974.13
745
2216568.53
... More
Supplying and stacking at site, laying, spreading and compacting stone aggregate of 63-45mm size to WBM Specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller of 8-10 tonne capacity in stages to proper grade and camber applying and brooming 13.2 mm type A screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to required density including all carriages of materials as involved complete (Finished work to be measured 75mm thick compacted thickness)
1115.3
2192
2444748.75
... More
Providing, laying, spreading and compacting 75 mm thick graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge Complete
999.14
1653
1652185.9
... More
Providing and applying tack coat using hot straight run bitumen of grade -VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. (On WMM/WBM Surface @0.75Kgs/Sqm)incl. all leads, lifts,loading, unloading,carriage of all materials complete
13321.88
65
868453.36
... More
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50mm compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacityincl. all leads, lifts,loading, unloading,carriage of all materials complete
666.09
7532
5017374.88
... More
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.incl. all leads, lifts,loading, unloading,carriage of all materials complete
13321.88
257
3435286.55
... More
Providing and laying 6mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete incl. all leads, lifts,loading, unloading,carriage of all materials complete
13321.88
88
1184408.39
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
260.82
7508
1958369.32
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
3024
58
177251.76
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work
3024
174
527905.73
... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe,
glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign
material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
669.38
560
374978.64
... More
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesivebacking which shall be activated by applying heat and pressureconforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.
10
6037
60371.02
... More
Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm.
10
4592
45925.67
... More
Storm Water Drain
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
1500
225
337800
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1200
191
229788
... More
Provdiing and Laying Stone Soling Hand Packed including all leads lifts carriage complete
225
700
157705.88
... More
Providing and laying in position cement concrete 1:4:8 ((1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete
150
4799
719892.45
... More
Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4(1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size)including all carriages complete
562.5
6017
3384680.63
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)including all carriages complete
10.5
8476
88999.69
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete (Thermo-Mechanically Treated bars of grade Fe-500D or more.
840
108
90732.6
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement
slurry and curing complete, but excluding the cost of nosing of steps etc. complete (50 mm thick with 20mm nominal size stone aggregate)
450
492
221801.4
... More
Centering and shuttering including strutting, propping etc and removal of form work
-
-
-
... More
Walls any thickness including attached buttresses, plinth and string courses etc.
3000
551
1654392
... More
Suspended floors, roofs, landings, balconies and access platforms.
40
629
25188.76
... More
Edges of slabs and breaks in floors and walls
240
229
55174.08
... More
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete
2200
233
513491
... More
CD Works E2
-
-
-
... More
Providing and laying of RCC Spun Pipes (18'' Dia) of required dia to the recorded cross slope in proper position with proper cushion including trench excavation and refiling of excavated material as proper cushion incl. all carriages involved with loading and unloading all complete
48.8
3875
189131.67
... More
Providing and laying of RCC Spun Pipes (24" dia of required dia to the recorded cross slope in proper position with proper cushion including trench excavation and refiling of excavated material as proper cushion incl. all carriages involved with loading and unloading all complete
48.8
5277
257541.02
... More
Protection Work R/Wall B/wall
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
1950
225
439153.65
... More
Providing and laying stone soling hand packed.incl all leads lifts, carriage complete.
253.5
700
177681.95
... More
Providing and laying in position cement concrete 1:4:8 ((1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages complete
169
4800
811312.89
... More
Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4(1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size)including all carriages complete
1872
7624
14272491.17
... More
Centering and shuttering including strutting, propping etc and removal of form work
-
-
-
... More
Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
5200
551
2867784.4
... More
Supply and filling of RBM (River bed material) as Back filling behind R-walls including dressing , leveling, compacting and loading , unloading including all carriages complete
1560
700
1093427.4
... More
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)including all carriages complete
3185
235
750118.46
... More
Crate Protection Work
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
2275.2
225
512390.97
... More
Supply and Filling of Nallah boulders in wire crates of 100mm*100mm mesh incl. binding, tipping and laying of crates after filling in proper position incl cost and carriages of all materials involved complete
4315.9
2143
9253186.02
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including all carriages complete
144.1
6016
867031.83
... More
Main Gate
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :
4.62
225
1040.46
... More
P/L, of dry stone soling duly hand packed with ramming, dressing, watering and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete.
0.61
700
427.56
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including all carriages complete
0.45
4800
2160.07
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete
7.68
8476
65098.86
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
921.25
108
99515.27
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
8.36
251
2098.96
... More
columns, pillars, piers, abetments posts and struts
25.28
651
16459
... More
arches domes, vaults upto 6m
12.55
2000
25102.07
... More
Providing and Fixing steel clading including cutting bending to proper shape, frame work and all accessories complete job
37.54
5359
201212.19
... More
P/F Steel Gate complete job (Built up sections, ISA, ISMC etc tubular (round, square or rectangular hollow tubes etc.) trussesetc.,including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
1008
121
122143.39
... More
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S.angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge all complete.(Board over Gate)
9.29
6037
56084.68
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
20.82
130
2720.92
... More
Miscellaneous Items
-
-
-
... More
Providing, fabricating, supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick) including cost of frame work and all fittings complete as per directions of EIC
1793.88
2473
4437734.43
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements