Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Agriculture or Forestry Works
Eprocure
Opening Date17 Dec 2024
Closing Date8 Jan 2025
Tender Amount₹ 7,34,04,926
Costs
EMD
₹ 14,68,099Document Cost
₹ 6,000Tender Fee
Refer Documents
Summary
Establishment Of Potato Seed Multiplication Farm At Dhar Sarthal Bani Kathua
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_268254_1Tender No
e-NIT No.13 of 2024-25 Dated 17.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Hard rock (Requiring blasting) =10%
389.19
687
267412.45
... More
Earthwork in excavation in all kinds of soil by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 mtr.
27.93
256
7173.82
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : In all kinds of soil.
277.94
89
24945.12
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
972.99
218
212501.02
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. a) Crushed.
170.24
572
97513.47
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
51.79
6591
341360.84
... More
Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size)
32
5733
183475.2
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
610.65
5673
3464461.71
... More
Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size).
120
5202
624348
... More
Providing and laying cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size).
76.73
4826
370337.35
... More
Pre-casting & Placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.
750
859
644250
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
142.37
416
59297.11
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size).
199.77
7788
1555888.67
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
58.32
9395
547957.22
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:
a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
208.53
9821
2048150.38
... More
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: a) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
0.94
10377
9754.52
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth level: a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
21974.17
123
2707217.74
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level: a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
29457.25
123
3629133.2
... More
Centering and shuttering including strutting propping etc. and removal of form work for:-
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
538.46
286
154188.02
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1110.94
628
698725.71
... More
Suspended floors, roofs, landings, balconies
and access platform.
331.74
718
238255.67
... More
Shelves (cast-in-situ)
25.54
718
18342.83
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1448.25
577
836436.79
... More
Columns, pillars, piers, abutments, posts and struts.
666.13
742
494634.83
... More
Stairs (excluding landings) except spiral staircases.
6.3
851
5362.25
... More
Edges of slabs and breaks in floors and walls under 20cm wide.
127.96
262
33551.11
... More
Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections
61.06
62
3785.72
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand).
232.3
7571
1758871.07
... More
Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.
208.91
1455
304099.84
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : a)Cement mortar 1:3 ( 1 cement : 3 coarse sand)
178.8
981
175492.2
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
178.8
159
28545.42
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
178.8
126
22627.14
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
252.42
1229
310249.42
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) Sal Wood.
2.56
142085
363739.26
... More
Dash fastner/ Chemical fastener
312
15
4680
... More
Providing and fixing 35mm ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. a)With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
108.16
3234
349811.07
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured)
108.16
401
43415.42
... More
Providing and fixing 35mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : a)Second class deodar wood
35.73
4256
152066.88
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. A) Fixed to openings / wooden frames with rawl plugs screws etc.
804.37
231
185930.13
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. i) Float glass panes. a) 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)
80.44
2139
172137.58
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : a) 250x10 mm
112
373
41815.2
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete. : a) 300x16x5 mm
66
292
19308.3
... More
Providing and fixing bright finished brass handles with screws etc. complete : a) 125 mm
146
232
33959.6
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
73
143
10490.1
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made a) Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
10.53
10487
110433.9
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
a) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).
23.73
10083
239285.01
... More
b) Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
46.8
9678
452937.42
... More
Cast for Toughened glass 12mm thickness.
69.91
1750
122342.5
... More
Galavanised wire mesh of average width of aperture 1.4 mm sqm 250.00 and nominal dia. of wire 0.63 mm
40.22
250
10055
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. A) Welded.
31590.73
138
4365838.89
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. a) 80x1.25 mm M.S. laths with 1.25 mm thick top cover.
27
3305
89235
... More
Providing and fixing ball bearing for rolling shutters.
4
531
2126.2
... More
Extra for providing mechanical device chain crank operation for operating rolling shutters. A) Exceeding 10.00 sqm and upto 16.80 sqm in the area
27
1222
33010.2
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes
1250
156
196187.5
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. A) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
338.76
181
61518.82
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. A) M.S. tube
338.76
161
54557.3
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm.
592.49
1395
826582.8
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. a) Size of tile 600x600 mm
88.87
1448
128763.74
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. a) Size of tile 600x600 mm
592.49
253
150314.71
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63 mm thick with zinc coating not less than 275 gram/m2
1132.97
974
1103569.43
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. a) 0.63 mm thick with zinc coating not less than 275 gram/m2
102.95
761
78442.75
... More
Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. A) 1.25 mm thick with zinc coating not less than 350 gram/m2
22.5
1234
27774
... More
Providing and fixing flashing of 40cm overall width in plain G.S. sheets fixed with polymer coated J or L hooks, bolts and nuts G.I. limpet and bitumen washers complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand): a) 1.00 mm thick with zinc coating not less than 275 gram/m2
294.35
700
206177.46
... More
Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. a) 0.80 mm thick with zinc coating not less than 275 gram/m2
282.7
723
204462.78
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes
-
-
-
... More
a) 75 mm diametre
150
226
33922.5
... More
110 mm diametre
280
366
102564
... More
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. a) Coupler:
-
-
-
... More
i) 75 mm
40
134
5364
... More
110 mm diametre
100
179
17900
... More
Single tee with door i) 75x75x75 mm
10
176
1764.5
... More
110x110x110 mm
46
289
13335.4
... More
Bend 87.5° : i) 75 mm bend
35
114
3991.75
... More
110 mm
85
183
15559.25
... More
Shoe (plain): i) 75 mm shoe
30
119
3582
... More
110mm shoe
80
129
10360
... More
Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 75 mm
-
-
-
... More
a) 75 mm
30
323
9694.5
... More
110mm
198
328
65043
... More
Providing and fixing of Floor Traps 110mm with double chrome plated cover one Grated and one closed and all other fittings required. (LMR)
14
440
6160
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). a) 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
552.21
1964
1084650.88
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
94.2
2336
220093.59
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. A) Granite work.
97.2
381
37101.24
... More
Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in white cement with curing complete. A) Granite of any colour and shade.
21.27
3180
67658.81
... More
12mm cement plaster of mix. 1:6 (1 cement:6 fine sand).
1188.83
266
316466.55
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: a) 1 : 6 ( 1 cement : 6 fine sand)
1188.83
306
364792.49
... More
6mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand).
184.44
241
44496.15
... More
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as permanufacturers’ specifications: a) Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture
104.61
147
15382.9
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. A) 2 mm thick
1793.47
181
324707.74
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. A) With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter
1793.47
64
115051.1
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. A) Two coat
1793.47
86
155404.18
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
896.73
268
240727.17
... More
French spirit polishing, Two or more coats on new works including a coat of wood filler
216.32
380
82385.47
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: a) Two or more coats on new work.
1105.44
131
145752.26
... More
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
3000
153
459000
... More
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.
-
-
-
... More
a)On W.B.M. @ 0.75 Kg/sqm.
3000
74
223050
... More
On bitumen surface @ 0.50 Kg/sqm.
3000
55
165600
... More
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7mm size (Passing 11.2mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete. Note: Seal coat item to be operated only with the prior approval of Chief Engineer concerned.
3000
134
402270
... More
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. a) 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity
180
8734
1572273
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. a) 40/50 mm compacted thickness with bitumen of grade VG-30 @5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in drum Type Hot Mix Plant of 60-90 TPH capacity.
120
13180
1581684
... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
150
638
95835
... More
Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge.
100
893
89305
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
1200
816
979380
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
45
8563
385357.5
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. a) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
600
1880
1128180
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
900
1885
1697355
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. a) White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
5
5493
27466.25
... More
Providing and fixing white vitreous china pedestal type water closet (Euorpean type) with seat and lid, 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and CI brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. a) W.C. pan with ISI marked white solid plastic seat and lid. (Jaguar/Cera)
8
7713
61709.6
... More
Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: a) Single half stall urinal with 5 liter P.V.C automatic flushing cistern.
-
-
-
... More
a) Single half stall urinal with 5 liter P.V.C automatic flushing cistern.
1
10079
10079.55
... More
Range of two half stall urinals with 5 literP.V.C automatic flushing cistern.
1
15112
15112.55
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
14
4841
67776.8
... More
Providing and fixing stainless A ISI 304 (18/8) kitchden sink as per IS 13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherequired: a) Kitchen sink with drain board. i) 510x1040mm bowl depth 250mm.
7
6166
43168.3
... More
Providing and fixing 8mm dia CP / SS jet with flexible tube upto 1 metre long with SS triangular plate to Euorpean type W.C. of quality and make as approved by Engineer-in-charge.
8
412
3296.8
... More
Providing and fixing CP brass 32mm size bottle trap of approved quality and make and as per the direction of Engineer-in-charge.
14
869
12175.1
... More
Providing and fixing CP brass single lever telephonic wall mixer of quality aned make as approved by Engineer-in-charge. A) 15mm nominal dia. (Jaguar/Cera)
7
6805
47640.6
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: a) Flexible pipe : i) 40 mm dia
21
150
3166.8
... More
Providing and fixing mirrior of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. A) Rectangular shape 1500x450mm
14
2048
28676.9
... More
Providing and fixing toilet paper holder : a) C.P. brass
9
1011
9105.75
... More
Cutting holes up to 30x30 cm in walls including making good the same: a)With common burnt clay (non modular) bricks
79
363
28724.4
... More
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:
-
-
-
... More
a) Internal work-exposed on wall with clamps at 1.00 meter spacing. a) 2025 ( 25mm OD) pipe
175
425
74392.5
... More
2532 ( 32mm OD) pipe
60
518
31128
... More
3240 ( 40mm OD) pipe
33
749
24748.35
... More
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: a) Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc.
-
-
-
... More
a) 1620 (20mm OD) pipe
290
515
149553
... More
2025 (25mm OD) pipe
115
632
72777.75
... More
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: a) External work including trenching and refilling etc. complete. a) 4050 ( 50mm OD) pipe
1850
765
1416175
... More
Providing and fixing unplasticised PVC connection pipe with brass unions: a) 45cm length: i) 15mm nominal bore.
109
118
12949.2
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
a) 32mm nominal bore.
4
750
3000
... More
b) 25mm nominal bore.
12
691
8300.4
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
10000
8
87500
... More
Providing and installation of 1.5 H.P. three phase water pump with all fittings, connecting inlet and outlet, fixtures, electrical connection and starter all complete. (Incl. all carriages). (Crompton/Sharp/Khalsi) (LMR)
4
12200
48800
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
17
583
9915.25
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
37
712
26366.2
... More
Providing and fixing 15mm nominal bore CP brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931. (Jaguar/Cera)
68
582
39599.8
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
7
2072
14504.7
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : a) 150 mm diameter
7
722
5058.9
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
21
11533
242203.5
... More
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
4
23815
95263.2
... More
Supply, Installation of PVC gully trap of size 110mm. (LMR)
8
2600
20800
... More
Construction of motorable steel girder bridge single lane, 30 Rm in EPC mode. Inclusive of construction, Soil Bearing Test, Structural designing, getting the design vet from any IIT / NIT / GCET Jammu, before star of work of the bridge. As per instructions of Engineer-in-charge. (LMR)
30
500000
15000000
... More
Providing and fixing on wall 35 ltr. Electric Geyser with ABS body suitable for handling a pressure upto 8 bar. Make of standard company with warranty and as approved by Engineer-in-charge. (Havels/Crompton) (LMR)
10
12000
120000
... More
Providing and fixing water purified (RO based). Having atleast 12 ltr. Water storage tank. Make of standard company with warranty and as approved by Engineer-in-charge. (Kent/Blue Star/Euroka) (LMR)
7
13500
94500
... More
Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.
-
-
-
... More
Sand from Billawar for an av. lead of 197.00 km. by M.T.
741.33
2364
1752518.95
... More
Stone aggregate (Crusher bajree) below 40mm nominal size from Billawar for an av. lead of 197.00 km. by M.T.
1230.53
2364
2908997.53
... More
Bricks from Kathua for an average lead of 207.00 Km. by M.T.
126434.33
6596
834031.64
... More
Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI box earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required (Group-A)
370
1015
375550
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1782
334
595188
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1530
275
420750
... More
2 x 6 sq. mm + 1 x 6 sqmm earth wire
130
439
57070
... More
2 x 10 sq. mm + 1 x 6 sq. mm earth wire
20
570
11400
... More
2 x 16 sq. mm + 1 x 6 sq. mm earth wire
20
772
15440
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
200
754
150800
... More
4 x 10 sq. mm + 2 x 6 sq. mm earth wire
20
1005
20100
... More
4 x 16 sq. mm + 2 x 6 sq. mm earth wire
20
1365
27300
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. a) 1 x 1.5 sq. mm
842
45
37890
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required a) 25 mm
200
145
29000
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
50
103
5150
... More
3 pin 5/6 A socket outlet
50
122
6100
... More
15/16 A switch
5
156
780
... More
6 pin 15/16 A socket outlet
5
197
985
... More
Bell push
5
140
700
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
100
40
4000
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required
77
586
45122
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
40
676
27040
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"curve including connections, painting etc. as required.
7
727
5089
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (75mm x 75mm)
7
298
2086
... More
3 Module (100mm x 75mm)
1
327
327
... More
4 Module (125mm x 75mm)
1
343
343
... More
6 Module (200mm x 75mm)
1
402
402
... More
8 Module (125mm x125mm)
1
454
454
... More
12 Module ( 200mm x 150mm)
1
547
547
... More
Supplying & fixing of following way single pole and netural, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar netural busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.
-
-
-
... More
4 way (Double door)
1
1510
1510
... More
6 way (Double door)
1
2206
2206
... More
8 way (Double door )
1
2573
2573
... More
12 way (Double door)
1
2315
2315
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB /Isolator)
-
-
-
... More
4 Way (4+12), (Double door )
1
4091
4091
... More
6 way ( 4+18), (Double door)
4
4974
19896
... More
8 way (4+24), (Double door)
4
5967
23868
... More
12 way (4 +36), (Double door)
1
7950
7950
... More
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole 6/10/16/32 Amp
150
256
38400
... More
Single pole and neutral 32 Amp
10
599
5990
... More
Single pole and neutral 40 Amp
1
750
750
... More
Single pole and neutral 63 Amp
1
850
850
... More
Triple pole and neutral 40 Amp
8
1750
14000
... More
Triple pole and neutral 63 Amp
8
1850
14800
... More
Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit
protection ,THD 10% , P. F.≥0.95, CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than
the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by
Engineer in charge.
20/22 watt LED 4 feet with min. lumen output (2000- 2200) lm
90
600
54000
... More
Supplying & fixing of 10-12 watt 2 feet Tube light
6
400
2400
... More
Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power (15-18 watt) LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% . System Lumen efficacy of ≥ 110 lm / watt, THD 10 % , Pf.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.).
Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per approved by Engineer in charge.
180
1300
234000
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
40
369
14760
... More
Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required.
-
-
-
... More
Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.
40
2200
88000
... More
450 mm/18" Heavy duty
1
6800
6800
... More
300mm/12" sweep exhust fan (Metalic)
26
1900
49400
... More
400 mm sweep wall fan
4
2900
11600
... More
Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy =125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety , Power Factor 0.95 driver Efficiency 85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow trace ability/ authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.
-
-
-
... More
LED Street Light fixture with Minimum lumen output 8700 lm
12
5500
66000
... More
LED Street Light fixture with Minimum lumen output 11250 lm
20
7000
140000
... More
Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover.
7
15000
105000
... More
Providing and fixing of 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required.
50
1162
58100
... More
Providing and fixing 4.00 mm dia copper wire on surface or in
recess for loop earthing as required.
50
155
7750
... More
Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.
7
12000
84000
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
45
244
10980
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
50
70
3500
... More
Providing and fixing of lightning conductor finial, made of 25
mm dia 300 mm long, G.I. tube, having single prong at top, with
85 mm dia 6 mm thick G.I. base plate including holes etc.
complete as required.
14
518
7252
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For horizontal run)
360
126
45360
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For vertical run)
230
197
45310
... More
SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar ( 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.
80
2200
176000
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)
-
-
-
... More
40 Amp, 25 KA, FP MCCB ICU = 100% ICS
5
4500
22500
... More
63 Amp, 25 KA, FP MCCB ICU = 100% ICS
8
6500
52000
... More
125 Amp, 36 KA, FP MCCB ICU = 100% ICS
3
8209
24627
... More
160 Amp, 36 KA, FP MCCB ICU = 100% ICS
2
13500
27000
... More
200 Amp, 36 KA, FP MCCB ICU = 100% ICS
1
15206
15206
... More
Electrical Rubber Mat having thickness 6mm and width 1 Mtr
4
1050
4200
... More
ON Load Change Over Switch FP 100 amp. (Front operated)
1
7100
7100
... More
Aluminium Bus Bar 200 Amp set of 4 strips
1
800
800
... More
Aluminium Bus Bar 300 Amp set of 4 strips
1
1000
1000
... More
Aluminium Bus Bar 400 Amp set of 4 strips
1
1200
1200
... More
Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set etc.
4
5000
20000
... More
Supplying, installation ,testing and commissioning floor/wall mounted Busbar chamber of following capacity Bus Bar Chamber made up of 1.6 mm thick IP42 sheet steel enclosure duly painted with powder coating complete with following accessories.4NO Aluminium bus bars having current density of 130A/Sq.cm at nominal current rating in conveinant sections and suitable for 415V,3phase,4wire,50HZ A.C.SUPPLY with 1 No. incomer
1
8600
8600
... More
Supplying and fixing of twin core aluminium cable all along the wall surface unarmoured.
-
-
-
... More
10 sq. mm
10
85
850
... More
16 sq.mm
10
104
1040
... More
25 sq.mm
10
135
1350
... More
35 sq.mm
10
186
1860
... More
Supplying & laying of PVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade of following size on surfaces/ direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armoured cable)
-
-
-
... More
16 sq. mm 4 core
1895
221
418795
... More
25 sq. mm 4 core
500
288
144000
... More
35 sq. mm 3.5 core
50
359
17950
... More
50 sq. mm 3.5 core
20
476
9520
... More
70 sq. mm 3.5 core
180
640
115200
... More
95 sq. mm 3.5 core
180
800
144000
... More
120 sq. mm 3.5 core
10
995
9950
... More
240 sq. mm 3.5 core
10
1866
18660
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required .
-
-
-
... More
3½ X 25 sq. mm (28mm)
4
313
1252
... More
3½ X 70 sq. mm (38mm)
2
468
936
... More
3½ X 95 sq. mm (45mm)
2
588
1176
... More
4 X 16 sq. mm (28mm)
8
309
2472
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
1500
247
370500
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
170
368
62560
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
1
1448
1448
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. a) 2 Pair
140
38
5320
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
47
4700
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out
let and complete with connections, testing and commissioning etc. as required.
12
2590
31080
... More
Supplying & fixing of Ding Dong Bell
6
200
1200
... More
Supplying, fixing & commissioning of Storage Water Heater (Geyser) of following capacity along with PVC Pipes etc as required.
-
-
-
... More
25 Ltr
2
9500
19000
... More
35 Ltr
2
12500
25000
... More
Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced
twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch
Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as pre approved by Engineer in charge.
150
57
8550
... More
Supplying & fixing of RJ 45 Network Jack CAT6
10
350
3500
... More
Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge
-
-
-
... More
6 U
2
6500
13000
... More
9 U
2
8500
17000
... More
12 U
1
9500
9500
... More
Supply, Installation, Testing and comissioning of 16 port Layer ‑2 unmanagable Switch with Power on Ethernet (PoE) enabled, with 16 nos. 10/100/1000base Tx PoE port with 2 SFP port, 1 no. dual personality Gbe Port for copper/fiber uplink, 20 Gbps switching capacity, 14.88 MPPS Forwarding performance , maximum power consumption 64 watt. Make: Cisco/D-link
2
19200
38400
... More
Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge. Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord
-
-
-
... More
1 Mtr
5
223
1115
... More
3 Mtr
5
358
1790
... More
Supplying, Installation, Testing & Commissioning of inverter 2000 VA along-with 2 Nos. long tubular batteries 150 AH and trolly of suitable size.
2
53000
106000
... More
Supply fixing of Fire extinguisher 6 KG
2
6500
13000
... More
Supply and erection of Galvanized Iron pole with galvanizing done in single dipping (Average coating thickness Minimum 65 Microns) continuously tapered poles having Octagonal / Circular cross-sections designed to withstand the maximum wind speed as per IS 875, The pole shaft shall be made from sheet steel (HT Steel Conforming to grade S355JO) and confirming to BSEN 10025 and shall be continuously
tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. pole shafts shall be provided with the rigid flange plate of suitable thickness (Fe 410 conforming to IS 226 / IS 2062) with provision for fixing 4 no. foundation bolts, This base plate shall be fillet welded to the pole shaft at two locations i.e. from
inside and outside.The octagonal Poles shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension as per table P-01 with base plate and foundation bolt on the Existing cement concrete foundation. All asper pre approved by Engineer in charge.
6 Mtr.
10
11164
111640
... More
supply and erection of bracket for galvanized octagonal pole, the bracket should be fixed on the top of the pole having top outer dia 70 mm to 90mm (A/F) (Suitable size complete in all respect as approved by the Engineer-in -charge at site:
-
-
-
... More
Single arm bracket 1 metre long for galvanized pole
10
1490
14900
... More
Supply, laying, testing and commissioning of 3C x 2.5 sqmm cu wire (FRLS)
80
160
12800
... More
Supply, laying, testing and commissioning of connector FP 63 amp.
10
73
730
... More
Supply installation testing and commissioning of almunium lugs/thimle 16 sqm/10 sqm/25 sqm
40
5
200
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%