Public Works Department Tender

Supply, installation, testing and commissioning of 12 to 15 Watt LED commerical type recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar). the firm to submit LM 79 and 80.

Supply, installation, testing and commissioning of 50Watt LED commerical type Flood lighting luminaries having aluminum body, minimum 100im/w,the luminary housing should be aluminum and the luminary optics shall have ahigh efficiency with transmittance, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton).

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans of Havells/ Crompton Greaves/Bajaj/ Anchor (Sample to be got approved), incl. cost of ceiling rose, extension of Gi pipe/rod (if required) and making of necessary connections.

Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/ Anchor).

Supply and fixing of two module stepped type electronic type fan regulator on the existing modular plate switch box including connections, but excluding modular plate etc. as required. (Legrand/SSK/ Anchor Roma Plus/ Schneider)

Supply and fixing of modular blanking plates on modular switch plates, excluding cost of switch plates.

Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excluding cost of conduits(Havells/ Polycab/ Finolex/ Anchor).

2 x 4 sq.mm + 1x 4 sq. mm Inverter sub main

2 x 10.0 sq.mm + 1 x 6 sq. mm Lighting sub main

4 x 16 sq.mm + 1 x 6 sq. mm Heating sub main

Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in RCC slab / walls including refacing of walls complete. (For First Floor complete and only down conduit of Ground Floor as the slab conduit for ground floor has been laid)

Supply and fixing of 32 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in walls/ under floors including refacing the same complete.

Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs

Supply and fixing of 6 way (4 + 18), Double door surface/ recess mounting , vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excl. cost of MCBs and Incomer. (Legrand/Schneider/ABB/SSK)

Supply and fixing of 12 way , Double door surface/ recess mounting , vertical type, 240 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excl. cost of MCBs and Incomer. (Legrand/Schneider/ABB/SSK)

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA MCB suitable for inductive load in the MCB distribution board complete with necessary connections. (Havells/ Legrand/ L&T/ABB/ Schneider).

Supply, installation, testing and commissioning of 40A DP rating 240/415V, 10 KA MCB suitable for inductive load in the MCB distribution board complete with necessary connections. (Havells/ Legrand/ L&T/ABB/ Schneider).

Supply, installation, testing and commissioning of 63A TPN MCB rating 240/415V, 10 KA MCB suitable for inductive load in the MCB distribution board complete with necessary connections. (Havells/ Legrand/ L&T/ABB/ Schneider).

Supply and fixing of single pole blanking plates on existing MCB distribution boards.

Supply, installation, testing and commissioning of wall/floor mounted compartmentalized ,415 volts, TPN MCCB main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 400A TPN MCCB 50KA 01 no. (Havells/ Legrand/ L&T/ABB/ Schneider). 800A TPN bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 200A 4 pole change over switch 01 no. front operated. 400A TPN bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 3.INVERTER/ SOLAR INCOMER 125A DP MCB 10KA 01 no. 200A P&N bus bar AL. Strips 01 set OUTGOING 250A TPN MCCB 25KA 02 no. for heating. 200A MCCB 25KA 02 no. for lighting 40A DP MCB 02 no for solar/ inverter lighting 32A DP MCB 02 no for motor and street/security lights. The contractor has to submit the test certificate of main switch gear.

Supply, installation, testing and commissioning of wall mounted compartmentalized ,415 volts, TPN MCCB sub distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 160A TPN MCCB 25KA 01 no. for heating 300A TPN bus bar AL. Strips 01 set 100A TPN MCCB 16KA 01 no. for lighting 200A TPN bus bar AL. Strips 01 set 32A DP 10KA 01 no. for UPS supply 100A P&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set.

Earthing with GI earth pipe 4.5 mtr. Long 40 mm dia. Including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.

Providing and fixing of 25mmx5mm GI strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one rim to be laid through required dia. of PVC conduit.

Supply, laying, connecting and commissioning of 120 sq. mm 3.5 core XLPE insulated and steel armored 1.1 KV grade Aluminum LT cable from LT panel to LT pole, incl. cost of required al. thimbles duly crimped. (Over head/ under ground).Havells/Polycab

Supply, laying, connecting and commissioning of 70 sq. mm 3.5 core XLPE insulated and steel armored 1.1 KV grade Aluminum LT cable from LT panel to Generator , incl. cost of required al. thimbles duly crimped. (Over head/ under ground). Havells/Polycab.

Supply, laying, connecting and commissioning of 50 sq. mm 3.5 core XLPE insulated and steel armored 1.1 KV grade Aluminum LT cable from LT main panel to sub distribution panels, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). Havells/Polycab.

Supplying and fixing of modular 6A socket out let/ indicators on existing modular plate and switch box, incl. connections, etc. as required. i. 5/6A socket.

ii. indicator.

Supplying and laying of B- Class 75mm dia. PVC pipes under ground , incl. earth work in excavation / under floor and making good the same after laying the pipes. (Prince)