Public Works Department Tender

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) all complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc all complete.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) all complete.

Brick work with common burnt clay machine moulded bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) incl. curing above plinth level & upto floor V-level with non modular bricks incl. all carriages involved from approved source to site of work complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length incl. circular works and applying a priming coat of approved brand and manufacture as directed by EIC etc all complete Second class kail wood

Providing and fixing 35mm thick ornamental panelled or panelled and glazed shutters for doors, incl. cost of panelling & beading and all necessary hardware items as required with synthetic enamel paint over priming coat of approved brand and manufacture as per direction of Engineer-in-charge complete. Second Class Kail wood.

Providing and fixing 35mm thick panelled or panelled and glazed shutters for windows and clerestory windows all necessary hardware items as required with synthetic enamel paint over priming coat of approved brand and manufacture as per direction of Engineer-in-charge complete. 2nd class kail wood.

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading incl. wood polishing all complete 2nd class kail wood all complete.

Proving and fixing of 4mm thick Glass panes with wooden fillets in doors, windows, clerestory windows including necessary beading and nails adhesives required etc all complete.

P/F of 12 mm thick Nordic pine wall paneling (T&G) fully finished & four sides planned,fungus and termite proof (seasoned moisture content 8% to 15% imported type ISO :14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved (including Budloo wood frame) work by 50 x 62 mm battens not more than 600mm c/c both ways, 12mm thick ply wood and touch wood polishing two or more coats complete in all respects finished work to be measured.

Providing and fixing wooden cornice of size 50x 50mm Kail wood where ever required, beadings nails polishing with clear varnish all complete as per the directions of Incharge Engineer.

P/F of 2nd class kail wood for Ornamental Eves boarding 300x25mm size with two or more coats of synthetic enamel paint over priming coat incl. all necessary nails and screws all carriage complete

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete (Popular wood) Complete.

Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work (2"x2") not more than 600mm c/c on both ways) and 12mm thick plywood and incl. wood polishing complete (Chaar Phool) incl. all carriages etc complete.

/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel. The sheets shall have wide panes with 3 No. stiffing ribs, effective water shedding and special male/female ends with fuil return legs on side lapps for purlins support and anti capillary flute inside lapp. The sheets shall have a hot dip metallic coated of zinc and alumunium (150 gms/sm) zinc/alumunium coating mass total on both side AZ-150 as IS-1397,550 PMA,yeild stress.Providing silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area).50mm incl. ridges/hips/valleys all complete.

Supply/Fixing of Electric items of approved brand and manufacture approved by EIC incl. all complete in all respects.

Light Points

Heating points

Fan pointsincl. Fan

Flood Lights

P/F of two core cable 16mm of approved brand and manufacture as service line complete in all respects.

Dismentalling the existing damaged structure by manual/mechanical means incl. stacking the serviceable material and disposal of the un-serviceable material upto a lead of 1 Km and as per the directions of EIC complete (11'x11' with wall thickness 2') size complete.

Carriage of material Sand/Stone agg. avg. lead of 10 Kms M.T and 250 Mtrs by Head load