Public Works Department Tender

Wiring for 6Amp Plug with(P+N+E) 3 x 2.5 sq.mm FRLS PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 2.5 sq.mm FRLS PVC Insulated copper conductor single core cable for loop Earthing of approved quality and IS! marked as required, with Anti Bacteria,2No.6Amp .Modular switch, 2NO. Modular 6 Amp. 5-PIN Socket, 6-8 Module Modular gride plate, cover and suitable GI box etc as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly, connections etc. as required.) complete excluding cost of Conduits

Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. (wire shall be approved before execution of wok by SITE In-charge Engineer strictly

4 X 16 sq. mm + 1 X 6 sq. mm Earth wire (3phsae +N+E) of Havells /Polycab

2 X 10SQ.MM+1 X 6. SQ.MM EARTH WIRE(P+N+E) of Havells /Polycab

2x6 SQmm + 1x6 SQMM P+N+Eof Havells/Polycab

Supplying, Installation, Testing and Commissioning of Following rating C Curve Miniature Circuit Breaker Four Pole(TPN) 415V,MCB in the existing MCB DB With making of Connections etc as Required

63Amp F.P

40 Amp F.P

Supply and fixing of following way Horizontal type TPN THREE POLE and Neutral),sheet steel MCB Distribution boards 415v on surface /recoss complete with tinned COPPER BUS BAR,noutral Bus bar,Earth bar inter connections .powder coated painted including earthing etc

8 way (4+24) Double door Legrand/Havelis//HoneywellABB/Schnelder/ L&T

Supply and fixing of following way,Horizontal typa SPN Single POLE and Neutral),sheet steel MCB Distribution boards 415v on surface /recess complete with tinned COPPER BUS BAR,noutral Bus bar,Earth bar Inter connections powder coated painted including earthing etcnormal Lighting sub main

18 way SPN Double door Legrand/Havells//Honeywell/ABB/Schneider/ L&T

Supply and fixing of 25/32 mm dia Medium grade PVC conduit including its allied accessories like bends and conceled deeps etc for laying of wires recessed In RCC slab/walls including refacing of walls with necessary clips and rowels plugs complete

Supplying and fixing of 5Amp to 32Amp Rating .240v, "C Curve Miniature Circuit Breaker suitable for inductive load of following poles in existing MCB. DB Complete with connections testing and commissioning etc as required

SINGLE POLE (5-32Amp) Legrand /Havells or L&T/Schneider/ABB

Supplying and fixing following rating, Double pole, (P +N) 240 V, C Curve Mineature circuit breaker (MCB),having a sensitivity current 30 mA in the 10 existing MCB DB complete with connections, testing and commissioning etc. as reqd.

40Amp. Legrand /Havells or L&T /Schneider/ABB

63Amp. Legrand /Havells or L&T/Schneider/ABB

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHINGSYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. bags also having Earth pit chamber (300mm x 1300mm) with man-hole cover for the above. Including cost of 20MM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job

Supply Installation testing and commissioning of 18 W+ LED Surface Mounted Panel light Juminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F0.95 THD10%,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V The Fixture should have In- built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt upproved In-house NABL lab/ government of India authorised lab. The Job Includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips or Havel's or Wipro or Jaguar or Bajaj make should be Commercial

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019),THD less than 10%, Including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), Insulation resistance more than 2 moga ohm, suitable for 230 V, 50 Hz, single phase A Supply, etc. complete as required.

Supply Installation, Testing and Commissioning 320 Cu.mur. AC 220-240 Volts, 50 liz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dll of Following Sizes including connection etc. Compt UPTO 450mun size

Supply installation testing and commissioning of 15 W+ LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P..0.95,THD10% CCT 5700K, CRI SU.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V.The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM180 test report should be from govt approved In-house NABL lab/ government of India authorised lab. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips or Havel's or Wipro or Jaguar or Bajaj make should be Commercial

Supply, Installation .Testing and Commissioning of Main Controlling Panel fabricated out of heavy gauge sheet steel,dully Painted with powder coated paint dust protected,earth terminal fitted on epoxy cleats, volt meter & Ammeters with selector switch & CT Coil of required ratio with all necessary connections & inner wiring of panel on both heating and lighting circuits. The switches are connected with bus bars inside panel. The switch are adjustable type made of L&T/ABB/ Legrand/Sirens make and change over switch should be of havells / L&T make (1) Normal Income: 400 Amps TPN MCCB With adequate breaking capacity 1 No 800 Amps TPN AI. Bus Bar Set = 1 set Digital Voltmeter,Ammeter,C.T Coils with Selector Switch & Phase Indicator set(2) Generator Incomer: 100 Amps Four Pole Change over switch panel mounted = 1 No 250 Amps TPN Al. Bus Bar Set = 1 set 16 Digital Volt meter, Ammeter,C.T Coils with Selector Switch & Phase Indicator set (3) Invertor Incomer 100-125Amps DP MCB = 1 No: 200 Amps Al. Bus Bar Set = 1 set Outgoing: (a). 63 Amps F.P(TPN) C-CURVE MCBS = 11 No's (b).40-63 Amps DP MCB =11+11= 22 no

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supply, laying, Connecting and Commissioning of 300sq mm 3.5 core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cablo of Havel's with required sizo of thimbles dully crimped with hydraulic crimping tool Including p/ fixing of saddies /clips with making of connection and partially to be laid underground through DWC High Density Polyethyleno Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14030 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grado under Ground cable Directly In Ground at a Depth of 50 CM Including excavation and Rolling the Tronch

Supply, Installation, Testing and commissioning of 30 Watts LED flood lighting luminaries having Aluminium Body,minimum lumens 100 Im/w the luminaries housing should be aluminium and the luminary optics shall have a high efficiency with transmittance, average life of 50000 hrs operating temperature -10 C to +45 C of Phillips/Bajay/Trilex/WIPRO/Jaguar make incl making of necessary Connections. The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. The fixture should have LM-79/LM-80 certificates and same are to be submitted before approving of fixture.

Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for O'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires

Supply,installation testing, &commissioning of 100 KVA three-Phase SERVO control VOLTAGE Stabilizer of Approved brand COPPER wound of /Chinar / Electric Field Alba AE /Cosco ete ISI/ISO certified for smooth functioning/ constant voltage supply having Technical Specifications: Input voltage L-L= 155-460 volts& L-N = 90-265V & output voltage-415V+ volts+- 2% l'hose to phase & 230V2% phase to neutral Buck Boost Transformer Copper wound 99.9% OIL, Immersed COOLING OIL. High cut/Low Cut /Time delay/Over Cut through Micro Control and Spike Protection including .Carriages installation charges, testing & taxes complete job also including cost of BYPASS facility BWO MCCB 100 Amps 4 pole 16ka und bushar Including AMC for 1 year after DLP is over.

Providing and Laying of shock proof rubber mats of 2m x 1m x 12mm thick in size