Public Works Department Tender

Design, Supply, Installation, Testing and Commissioning of 06 passenger (408kg) Elevator (Machine room less) with following specification: Make: - Johnson, ThyssenKrupp, Kone, OTIS or any other reputed make. Operation: Hydraulic Passenger Simplex Elevator with/without attendant. Controller/Drive: - Microprocessor based AC Variable Voltage. Travel:- 02 stop & 02 opening on one side of car. Speed: Minimum 0.35 to 0.5 m/s or above. Location of Machine: Electric Traction Gearless Motor to be mounted on the foundation in the lift well (05HP). Serving Floors: G+1(Single Entrance) Valve: Blain make valve, 24 V DC, 2 speed. Levelling: A separate automatic levelling device with accuracy of ±2mm shall be incorporated. Shaft Specifications: Fabricated constructed, Dimensions W1550mm x D 1500mm clear Dimensions Pit Depth 1500mm below the finished floor level of 1st landing Overhead 4800mm beyond finished floor level of last landing Car Specifications:-SS with honeycomb finish, Infrared Light curtain full length touch less door with SS honeycomb finish. Min. required Dimension 1100mmW×1000mmD×2200mmH, Hairline SS ceiling with 01 fan 04 no. LED Lights. Flooring: - PVC Mat Stud Type Floor. HLSS 304 car wall finish. Car Operate Panel COP: Standard battery operated Intercom system.Standard battery operated emergency Alarm. Standard battery operated emergency Light. Landing Door specifications: Centre opening horizontal sliding landing door. Dimension: 700mmW×2000mmH in stainless steel. Honey comb SS Landing door ground & First floor. Accessories: Automatic Rescue device (ARD), Battery operated car light surface mounted fixture with false ceiling. Digital floor indicator inside/outside. Up/down indicator. Car Here Indicator. Fireman switch at GF. Power Voltage: 3 Phase 380-440V AC; 50 Hertz. All the equipments and components of the lifts should be properly earthed as per standard. Complete Job includes material, labour charges and all kinds of taxes etc.

Design, Manufacturing, Supply, Installation, Testing and Commissioning of a digitally controlled oil cooled 15 KVA Servo Automatic Voltage Stabilizer (transformer oil to be the cooling medium confirming to IS-335 with latest amendments), Confirming to IS-8447-1989, IS 9815 I & II of 1994 amended up to date suitable to operate on unbalanced input voltage of 260-480 volts and delivering output voltage of 415±1% Volts, 3 phase 50±3% cycles/second frequency, copper wound duly painted with providing and filling of transformer oil. Complete Job includes material, labour charges and all kinds of taxes there of

Chemical Earthing of the digitally controlled oil cooled 15 KVA Servo Automatic Voltage Stabilizer including job of making pit of suitable size for chemical earthing. The job includes earth work by using labour for making pit of suitable size for proper earthing and after that laying Copper rod of suitable size (3 mtrs approx.) and filling the pit with chemical (Chemical Earthing). Job also includes clamping the copper rod with the copper strip of size (20 x 3 mm) with nut and bolts. Complete job includes cost of Copper rod, Copper Strips and Copper wire, chemical and other related material and cost of labour charges and taxes etc. (02 Nos. earthing)