Public Works Department Tender

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with Acrylic smooth exterior paint of required shade Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) incl. cost of scaffolding

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all carriages

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. all carriages

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. all carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT Bars

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.incl. all carriages

P/F of 50mm thick coloured interlocked tiles coloured tiles in required line and curvature incl.laying of 50mm thick second class sand beneath tiles for cushioning and providing and laying of cement concrete mix in 1:2:4 on side edge of tile work wherever required and as directed by engineer in charge at site inc.all carriages of materiel involved from nearest source to site of work complete

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as perstandard design : Inside size 90x80 cm and 60 cm deep including C.I. cover withframe (light duty) 455x610 mm internal dimensions, total weight ofcover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type "B") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation including all fittings & fixtures complete job

100 mm

75 mm

Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia, of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC.

Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness.

Upholstery to the chairs (single seats) by way of removal of wornout regzine, cloth, cushions,foam,linings etc and by providing and fixing new regzine/cloth/leather of superior quality ,foam of high density of appropriate thickness incl.stiching whereever necessary,repairing of arms and legs (all materials involved to be approved by engineer in charge) incl cost involved for labours for displacement of sofa sets from rooms to working space area and vice versa complete job.

Providing and fixing of Vertical blinds of required colur as approved by EIC

Providing and fixing of Roller blinds of required colur as approved by EIC