Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Dec 2024
Closing Date24 Dec 2024
Tender Amount₹ 3,87,00,000
Costs
EMD
₹ 7,74,000Document Cost
₹ 6,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_266624_1Tender No
E-NIT No. 26 of 2024-25 Dated 02.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
20% Qty. in Ordianry Rock
531.76
493
262423.56
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
32.94
6540
215442.42
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
166.62
5202
866907.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as
per design mix is content considered payable or recoverable separately All works upto plinth level
364.53
8021
2923931.58
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as
per design mix is content considered payable or recoverable separately All works above plinth level upto floor V level
217.28
9412
2045050.22
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
77982.23
123
9607410.74
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
265.98
7571
2013880.87
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
221.42
1455
322310.02
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
300.12
947
284288.67
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
282.84
159
45155.41
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
125.91
5733
721917.58
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
1425.31
286
408137.52
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts
360.77
742
267889.76
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
457.43
577
264188.7
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms
979.61
718
703555.9
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide
266.76
262
69944.47
6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
771.21
241
186054.41
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
2494.36
306
765394.37
20mm cement plaster finished with a floating coat of neat cement of mix : 1 : 4 ( 1 cement : 4 fine sand)
48.23
459
22156.86
12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
1067.96
266
284290.95
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm thick.
2961.46
181
536172.33
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
2961.46
66
197973.6
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats
2961.46
115
341752.48
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1067.96
185
197786.19
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1946.66
218
425150.54
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.
d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin- charge With average thickness of 120mm and minimum thickness at khurra as 65 mm.
754.31
1404
1059541.54
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
720.87
1395
1005685.74
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete In colour such as White, Ivory, Grey, Fume Red Brown
50.34
1222
61530.58
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,
in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete Size of tile 600x600 mm
61.49
1448
89092.86
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any
size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including
pointing in white cement mixed with pigment of matching shade complete.
300.18
1229
368951.24
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
8.46
2336
19766.37
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
506
381
193140.2
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to
edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm)
243.6
3455
841686.72
Providing and laying Brick Bat filling of size 75mm and above etc complete job
27.13
550
14921.5
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete
1.98
1204
2384.91
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)
735.11
514
378067.07
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder
coated 50 microns)
332.68
607
202069.83
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
108.56
1584
172007.89
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge Pre-laminated particle board with decorative lamination on both sides.
31.68
933
29568.53
Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4
mm aperture on both sides.
23.75
1014
24102.69
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35MM thick
102.6
3234
331828.92
Extra for providing vision panel not exceeding 0.1 sqm in all types of flush doors (Cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square
4.8
194
931.2
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured) Decorative type door.
6.48
388
2514.24
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
102.6
107
10983.33
Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard
section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
285.2
553
157943.76
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm
116
68
7888
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm
116
108
12615
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm
190
63
12036.5
Providing and fixing oxidized M.S. casement stays (straight peg type) with necessary screws etc. complete. 300 mm weighing not less than 200 gms
18
73
1317.6
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper
58
63
3680.1
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
53
456
24189.2
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5mm width
524.75
97
50979.46
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,
14.16
10401
147285.24
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
84
753
63315
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
40
366
14652
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm
20
179
3580
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm
10
289
2894
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend
10
183
1830.5
Supply & fixing of clear toughned glass of 16 mm thick with all accessories, screws etc. as approved by architect and complete in all respect.(Ground to Third floor)
Note:- Consideresing 300 mm extra height for both top & bottom faces for fixing the glass
4.8
1284
6163.2
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory
method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
420.5
929
391001.93
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
800
120
96640
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia ( heavy type)
56.8
192
10905.6
Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections
260
62
16120
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
163.89
416
68260.19
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid.
15
7713
115705.5
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
17
3260
55434.45
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge
15
412
6181.5
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Flexible pipe 40 mm dia
17
150
2563.6
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm
2
6166
12333.8
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
17
869
14784.05
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the
wall etc. 15mm nominal outer dia pipes.
150
419
62962.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the
wall etc. 20mm nominal outer dia pipes.
200
492
98470
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 32mm nominal outer dia pipes.
60
492
29562
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc. 32mm nominal outer dia pipes.
70
416
29127
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc. 50mm nominal outer dia pipes.
50
791
39580
Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 165 mm long, weighing not less than 110 gms.
15
310
4650
Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore 125 mm long foam flow, weighing not less than 120 gms.
17
331
5634.65
Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms.
34
233
7922
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls 25mm nominal bore, 152mm long, weighing not less than 440gms
2
871
1743.6
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour 25 mm nominal bore, weighing not less than 62gms
24
103
2486.4
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore
20
288
5766
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore
30
320
9612
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm
17
2048
34821.95
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms
20
712
14252
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
10000
8
87500
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
4
582
2329.4
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
17
1474
25060.55
Providing and fixing toilet paper holder C.P. brass.
15
1011
15176.25
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
17
287
4887.5
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
17
248
4223.65
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms
17
835
14206.05
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 150 mm dia. R.C.C. pipe
100
545
54590
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of
cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
28
11533
322938
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
2620
52412
Providing and fixing in position PVC NT Floor Trap etc complete Job as per the directions of the Engineer-in-charge.
32
350
11200
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
32
118
3801.6
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc 75mm nominal outer dia pipes
150
1967
295132.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc 100mm nominal outer dia pipes
150
2779
416985
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all
minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
3
483
1450.8
Extra for depth for manholes Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
0.3
10852
3255.75
Providing and placing in position 100mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains offootpath of various sizes, of M-25 grade cement concrete for RCC work,including cost of centering, shuttering, reinforcement of 8mm dia TMTbars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.-Filter Protection
5.95
3681
21905.52
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kind of Soil,1 meter from cutting Edge.
24.3
479
11646.99
Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermo bonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm characteristic opening size (090) of 110 micron and tensile strength of 8.0 KN/m that will be working as separation or protecting layer, geo composite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per directions of Engineer in charge.
120
804
96504
Providing and fixing of CGWB/GRIHA approved Pure Rain Filter 700mm dia with 300mm dia inlet and outlet to accumulate storm water having desilting suspended solid catcher made out of FRP with strainers steel 304 grade strainers, having steel bucket of 600micron capable of eliminating finer particulate matter upto160mmicron filtration made of SS net with long fiber foam of 25mm thickness, green color, filtration capacity 40-80 kiloliters complete in accordance to the design, drawing and specification complete as per entire satisfaction of Engineer-in-Charge. Total depth of filter shall be Upto 2000mm including two filter extension. lifing at any height, loading, unloading all taxes charges, all I & M, T & P as complete job Nothing extra will be paid whatsoever the case may be.
1
146981
146981
Providing & Fixing of Co-polymer based rainwater harvesting structure including supply of cross wave of size 494 mm x 494 mm x220mm with minimum void ratio of 94.7% having a weight of 1.8 kg and spacers having size of 988 mm x 240 mm x 25 mm having a weight of 0.8 kg of approved make and arranging the same in as directed by the engineer -in-charge and in complete accordance to the design, drawings. The rates are inclusive of all necessary transportation, loading, unloading excise, vat control etc.as per entire satisfaction of Engineer -in-charge lifing at any height, loading, unloading all taxes charges, all I & M, T & P as complete job Nothing extra will be paid whatsoever the case may be. Holding str.
11
29323
322553
Providing and fixing polyethylene pipe of working pressure 6Kg per square cm confirming to IS:4985 including jointing with sealing ring confirming IS:5382 leaving 10 mm gap for thermal expansion 300mm dia PVC pipe. lifing at any height, loading, unloading all taxes charges, all I & M, T & P as complete job Nothing extra will be paid whatsoever the case may be. 300mm dia upvc pipe .
3
3800
11400
Constructing brick masonry manhole (silt chamber type) inside size 0.90mX0.90m & 1.00m deep with FPS brick class designation 75 in cement mortar 1:4 (1 Cement: 4 coarse sand ) 20cm foundation concrete 1:4:8 (1 cement: 4 C/sand: 8 graded stone agg 40mm size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 C/sand) finished with a foating coat of neat cement and providing 75 mm thick bed concrete in 1:2:4 mix (1 cement: 2 C/sand: 4 graded stoneagg . 20mm n/size) including neat cement punning inside the manhole complete as per standard design/depth shall be measured from invert level of manhole excluding the cost of Perforated Precast RCC Rectangular Cover shall be paid separately.
1
18896
18896
Supply and installation of FRP based access Chambers, each having of size 500 mm x 500mm x 500 mm to have access in the tank complete in accrodance to the design, drawings and specifications. FRP inspection Chamber .
7
6937
48559.7
Providing & fixing of HDPE high EVA liner having a thickness of 1.2 mm for the collection of water heat welding onsite and off site as per the requirement.
60
1100
66000
Providing & Fixing Kirloskar Single Phase 1 HP Submersible Pump with Control Panel Discharge 18-72 LPM , & Head 16-62 mtr with all accessories including the cost of delivery pipe , wiring cable
1
71000
71000
Providing and fixing polyethylene pipe of working pressure 6Kg per square cm confirming to IS:4985 including jointing with sealing ring confirming IS:5382 leaving 10 mm gap for thermal expansion 200 mm dia PVC pipe. Connection of Pipe from Drain to desilting Chamber.
50
2250
112500
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
36.99
2516
93098.28
Demolishing stone rubble masonry manually/by mechanical means including disposal of serviceable material and disposal of unserviceable material through concerned contractor as per direction of Engineer-in-charge: In cement mortar
82.4
1740
143413.08
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead Of area of 3 sqm. and below
39
285
11124.75
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
33.69
1458
49135.18
Providing & Fixing Kirloskar Single Phase 1 HP Water Pump complete job as per the directions of Engineer-in-charge.
1
10000
10000
Carriage of Sand for avg. distance 30 km by MT including loading, unloading and stacking at site complete.
601.35
520
312906.46
Carriage of Stone Aggregates 40mm and above nominal size for avg. distance 25 km by MT including loading, unloading and stacking at site complete.
176.3
505
89144.33
Carriage of Stone Aggregates below 40mm nominal size for avg. distance 25 km by MT including loading, unloading and stacking at site complete.
613.8
465
285502.93
Carriage of Bricks for avg. distance 40 km by MT including loading, unloading and stacking at site complete.
143449
1
242428.81
Wiring for light point fan point exhaust fan point/ call bell point |with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and carthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
335
1015
340025
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
60
586
35160
Supplying and fixing suitable size GI box with modular plate and |cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
70
676
47320
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
25
727
18175
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated |copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1I No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop carthing as required.
1300
334
434200
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the sane in case of recessed conduit as rcquircd. (ISI Make). 25mm
600
145
87000
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single |core cable in surface/ recessed medium class PVC conduit as Irequired |2 X 1.5 sq. mm + 1X 1.5 sq. mm earth wire
100
233
23300
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single |core cable in surface/ recessed medium class PVC conduit as Irequired 2 X 2.5 sq. mm + 1X 2.5 sq. mm earth wir
1300
275
357500
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single |core cable in surface/ recessed medium class PVC conduit as Irequired 4 X 4 sq. mm +2 X4 sq. mm earth wire
50
537
26850
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single |core cable in surface/ recessed medium class PVC conduit as Irequired 2 x6 sq. mm +1 x6 sqmm earth wire
80
439
35120
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single |core cable in surface/ recessed medium class PVC conduit as Irequired 4 X 10 sq. mm + 2 X6 sq. mm earth wire
80
1005
80400
Supplying and drawing following sizes of FRLS PVC insulated |copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 1 x 1.5 sq.mm
400
45
18000
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required 5/6 amps switch
20
103
2060
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required 3 pin 5/6 amp socket outlet
20
122
2440
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required 15/16 amp switch
2
121
242
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required 6 pin 15/16 amp socket outlet
2
137
274
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required Telephone socket outlet
5
148
740
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required TV Antenna socket outlet
3
148
444
Supplying and fixing following modular switch socket on the existing modular plate & switch box including connections but lexcluding modular plate etc. as required Bell push
10
140
1400
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as 2 pair
100
38
3800
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
103
369
38007
Supplying and fixing following size/ modules, Gi box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (75 mm X 75mm)
5
298
1490
Supplying and fixing following size/ modules, Gi box alongwith modular base & cover plate for modular switches in recess etc as required. 3 module (100 mm X 75mm)
5
327
1635
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
50
40
2000
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, carth bar, din bar, interconnections, powder painted including carthing etc. as required. (But without MCB/ RCCB /Isolator) 6 way (4+18), (Double door)
3
4974
14922
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, carth bar, din bar, interconnections, powder painted including carthing etc. as required. (But without MCB/ RCCB /Isolator) 8 way (4+24), (Double door)
3
5967
17901
Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
150
256
38400
Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral
25
599
14975
Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SPN 63 Amp
6
850
5100
Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. TPN 40 Amp
3
1750
5250
Supplying and fixing 5 A to 32A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.TPN 63 Amp
5
1850
9250
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre |long etc. with charcoal/ coke and salt as required.
1
13838
13838
Providing and fixing 20 mm X 3 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
3
950
2850
Providing and fixing 20 mm X 3 mm copper strip on surface or in recess for connecion etc. as required.
10
697
6970
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
5
155
775
Providing and fixing following rating and breaking capacity and pole| MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 250 Amp, 36KA, FPMCCB ICU = 100% ICS
1
17510
17510
Providing and fixing following rating and breaking capacity and pole| MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ON Load Change Over Switch FP 200 amp. (Front operated)
1
12900
12900
Providing and fixing following rating and breaking capacity and pole| MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Busbar, Indicating Lamp, CT Set etc as required.
1
5000
5000
Fabrication, supplying, installation testing and commissioning of main pannel made out of 2mm thick M.S. sheet, floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision of space for fixing of required nunmber |of protective devices as required.
20
2200
44000
Supplying & laying PVC insulated and PVC Sheathed/ XLPE aluminum power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering Jand refilling of trench etc. as required 150 sq. mm x 3.5 core Armoured
80
1500
120000
Supplying & fixing of following electrical items. Angle / Button Holder.
10
35
350
Phenolic Laminated Round/ Square shett 4" dia/ side
100
10
1000
Fan sheet
100
25
2500
Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver , System lumen efficacy 110 Im/Watt output, internal surge protection of 2.5 KV with Short |& Open circuit protection ,THD 10%, P. F0.95, CRI 80, life |time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/4000°K/ 5700°K V6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. |OEM must have its own in house NABL lab setup for all testing |facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. AIl as per pre approved by Engineer in charge.
|20/22 watt LED 4 feet with min. lumen output (2000- 2200) Im
40
600
24000
Supplying and fixing of Following light fitting on ceiling/ wall with necessary connection from as required 600 mm x 600 mm size recessed mounted LED Luminaries |34/36 watt. having minimum 3600 Lumens with minimum |lumens efficiency 110 Lumens/watt (Commercial type) with 50000 burning hours.
160
2200
352000
Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required. Supply, Installation, Testing and Commissioning of 1200 mm sweep,| BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise-75 degree |C (max.), insulation resistance more than 2 mega ohm, suitable for |230 V, 50 Hz, single phase AC Supply, earthing etc. complete
103
2730
281190
Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required. Exhaust fan 300 mm size
15
1800
27000
Supplying & fixing of following way single pole and netural, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar netural busbar, earth bar, din bar, interconnections, powder painted including | earthing etc. as required. 6 way (Double door)
2
2206
4412
Providing & Fixing of IKO8, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat |dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each. The System efficacy =125 Im/ wt and potted driver & |has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety Power Factor 0.95 driver Efficiency 85%,THD) 10% Humidity 10% to 90% RH Working Temp -5C to 45C. driver |current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened, CRI 70 and CCT 5700K +355K. Surge protection shall be min 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own |in house NABL lab setup for all testing facilities for LED fixtures. |(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge LED Street Light fixture with Minimum lumen output 8700 Im
6
6000
36000
Supply Installation Testing and Commissioning of 2 MP or better Indoor Bullet/ Dome camera with 2MP resolution (1920x1080)@30fps, IH+265/ H.265/ H.264, Video Bit Rate |64Kbps~ 8Mbps,Audio Compression G.711/G.711U/, Audio Bit Rate 8K~48Kbps, Image Sensor 1/2.9" 1/3"CMOS, Signal System PAL/NTSC, Min. Ilumination Color: 0.005 lux @F1.6, |AGC ON; B/W: OLux with IR, Shutter Time 1s to 1/100,000s, 1/2s to 1/100,000s Day & Night Dual IR Cut Filter with Auto Switch, Wide Dynamic Range 120dB, Angle Adjustment Bracket, pan: 0° to 360°, tilt: 0° to 75°, rotate: 0° to 360°,Lens type -Fixed,Focus 4mm lens 2.8mm@ F1.6, Lens Mount M12, Aperture F2.0, Fixed FOV Horizontal field of view: 82.1° 94° (4mm), IR LEDs 2, IR Range Up to 50m 30m or better, Wavelength 850nm, Alarm Trigger-Motion Detection, Mask Alarm, IP Address Conflict, Protocols TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, MULTICAST, IPV4, NTP, UDP, Telnet. Privacy Masking Off / On (4 Areas) User account and password protection, HTTPS, IP Filter, Digest authentication, TLS1.2 only, AES128 / 256,Operating temperature - |30oC~60oC, O~95 90% RH.System Compatibility ONVIF (PROFILE s/T/G), Built in analytics Motion Detection, Tampering, Intrusion,Video Exception (scene change, video blur and video cast detection), line crossing detection and region intrusion detection Protection IP67, IK10, Lightning protection, surge protectionSDK. certifications- FCC, EN, RoHS, NDAA compliance. Makes: Bosch, Honeywell, Axis, Pelco, Mobotix, Tyco or equivalent
10
15840
158400
Supplying ,installation testing and commissioning of 16 Channel Network Video Recorder (NVR).
1
45000
45000
6 TB surveillance Hard disk storage device
1
18500
18500
Micro SD/SDHC Card 128 GB
10
1300
13000
1 mtr. Cat 6 Networking patch cord cable.
10
450
4500
Supply Installation Testing & Commissioning of STP lCat 6 UTP Cable Armoured, Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be Fire Retardant.
500
52
26000
Supply Installation Testing & Commissioning of 42" LED Monitor, full HD, HDMI Port, component video inputs, Digital Audio output.
1
55000
55000
Supply, Installation, Testing and Commissioning of 8-Ports |10/100/1000Mbps PoE + 2-Ports SFP 100/ 1000Mbps Smart Managed Switch, 130Watts, Switch Should Support 8 x |10BASE-T/100BASE-TX/1000BASE-T POE Ports, 2 100/1000 Mbps SFP ports, auto- negotiatiation ports, 130 Watts Power Budget.Switch Should Support Min. 20Gbps Switching |Capacity and Maximum 64 Byte Packet.Forwarding Rate is 14.88Mpps, MAC Address Table: 8K and 4.1 MBits Packet Buffer, 256 Static MAC Entries.Switch Should support Time based POE & CPU Protection.Power Saving (Green) EEE 802.3az Energy Efficient Ethernet (EEE). Switch Should Support 4 Queues per port, Traffic Prioritization 802.1p, Strict Priority, Bandwidth Control: Port-based (Ingress/Egress, min granularity 10/100/1000 is 16 Kbps),Switch Should Support |Access Control List based on: 802.1p priority, VLAN, MAC laddress, Ether type, IP address, DSCP, Protocol type, |TCP/UDP port number, IPv6 Traffic Class, Max. ACL Profiles /Rules: 50/ 768,Switch Should Support 802.1X Authentication, Max. 128 entries when using local database, IPv6 RADIUS server, MD5 authentication,Switch Should Support DoS attack prevention, Port Security: Max. 64 MAC |Addresses per Port, Broadcast/Multicast/Unicast Storm Control, DHCP Server Screening, Support 2 IP Interface & |IPv6 Neighbour Discovery (ND), Traffic segmentation, Switch Should Have FCC Class A,CE Class A,IC Class A, UL Certifications. Make: HP, CISCO, DLINK, EXTREME or equivalent
2
22836
45672
suppiy IStailaưon Tesung ComISSIOTIIg or JU Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangemernts (Fully Loaded).
1
10000
10000
Supplying, installation, testing and commissioning of |Surge Protection DP 32 Amp complete with MCB and other item as required of Siemens/ Schneider/ ABB/Legrand.
1
7000
7000
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as reouired 10 Zone
1
16287
16287
Supplying, installation, testing & commissioning of smoke detector with built in LED and mounting base complete with all connections letc. as required.
22
1153
25366
Supplying, installation, testing & commissioning of manual call |boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
6
474
2844
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcements, mounted in M.S. box (16 sWG) with hinged cover plate & suitable for operation with amplifier ilc line matching transformer etc. complete as required.
6
557
3342
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode |complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG) ABS box with break glass in front etc. complete as required.
2
905
1810
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, |600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
800
173
138400
Supply and erection of Mild steel Swaged tubular pole |conforming to IS: 2713-1980 (partI to I) with |base plate, The pole shall be made from steel tube & Pipe (IS1141, Fe 410) including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals, cable entry with 32 mm dia. 'B' class GI cable sleeves. After eraction pole shall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as per the direction |of Engineer incharge 9.0 Mtr. ( 410 SP- 28)
8
17666
141328
Providing installation, testing and commissioning of Double Door type main panel made of CRCA Sheet outdoor type, cubical feeder panel with 1.6 mm thick sheet painted from inside and outside to provide complete protection from water moisture, dust and vermin proof, duly wired up with the following accessories/equipment.
MCCB DP 100 amp 25 KA =1 No.
Metering and Indication
Digital Metering devices, comprising of Voltmeter, Ammeter, Selector Switch, Indicating Lamp, CT Set, MCB strips for required Nos. of MCB etc. =1 set
Aluminum Busbar
High conductive electrolytic grade aluminium busbar of 240 |Amp, TPN, with heat shrinkable sleeve, duly colour coded. =1 Set
Timer Switch
a) Timer Switch =1 No.
b) MCB 6 amp to 32 amp = 8 Nos.
c) 1x 1.5 sq. mm = 1O Mtrs.
1
28000
28000
Supply, instalation, testing & commissioning of GI Electrode Earthing with 50mm dia and 2 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST COmpound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water. The earthing pit should be covered with PVC cover.
1
7000
7000
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
30
244
7320
Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each. The System efficacy =125 Im/ wt and potted driver & has a unique BISR number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and |Auto resetting Safety, Power Factor 0.95 driver Efficiency 85% ,THD() 10% Humidity 10% to 90% RH Working Temp |-5C to 45C. driver current 750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened, CRI 70 and CCT 5700K +355K. Surge protection shall be min 24 KV internal and min |10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability /authenticity. Fixture shall be AS PER IS |10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED |fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be |submitted. All as per pre approved by Engineer in charge LED Street Light fixture of 120 watt
8
9000
72000
Supplying and fixing of Marshalling Box for Street Light Pole 200 x 250 x 100 mm 1.6 sheet thickness including 6/10 amnp. MCB complete in all respect.
8
1800
14400
Supplying & laying PVC insulated and PVC Sheathed/ XLPE aluminum power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling of trench etc. as required 4Cx 16sqmm
100
180
18000
Supplying & laying PVC insulated and PVC Sheathed/ XLPE aluminum power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling of trench etc. as required 35 sq. mm 3.5 core
35
359
12565
Supplying, instalation, testing and commissioning of 150/150 Liters of water Cooler having full stainless steel body, cooling |capacity 150 Itr/hour and storage capacity 150 Itr alongwith PVC connecting pipes as required.
1
59000
59000
Supplying, Installations, Testing & Commissioning (RO + UV + UF mineral control with TDS control )
1
19500
19500
Supplying, Installation, Testing & Commissioning of following capacity automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V along with |wall mounting brackets & fitting. The job includes repairing the walls where necessary Warrantee.:- 2 Years from the date of installation 4KVA
1
9000
9000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%