Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Road Construction
Civil Works Others
Building Construction
Drainage Work
Eprocure
Opening Date10 Oct 2024
Closing Date28 Oct 2024
Tender Amount₹ 22,03,59,000
Costs
EMD
₹ 44,07,180Document Cost
₹ 14,000Tender Fee
Refer Documents
Summary
Construction Of Allied Works Viz Compound Walling, Entrance Gate, Rcc Retaining Wall, Rrm Retaining/breast Wall, Internal Road, Pipe Culvert, Pcc Storm Water
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_259083_1Bid Award Id
ViewTender No
Fresh Nit-35 of RNB/7726-29/2024-25 dated.10-10-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
463.38
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
24.6
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
675.33
-
-
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
424.42
-
-
Providing and laying RCC cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
452.3
-
-
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
873.85
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
3575.01
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
1340.55
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers.
3768.58
-
-
Columns, pillars, piers, abutments, posts and struts.
5211.4
-
-
Suspended floors roofs landings s (cast-in-situ)
1188.84
-
-
Stairs (excluding landings) except spiral staircases.
168.5
-
-
Arches, domes, vaults upto 6 m span
12.55
-
-
Edgs of slabs andf breaks in floors and walls under 20cm wide
210.08
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
37616.09
-
-
P/F of Steel Cladding complete job
42.01
-
-
Supply and filling of RBM/Nallah Muck incld spreading to proper grade , incld all costs and carriages,complete job, as directed by EIC.
1123.91
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more.
187352.9
-
-
Dry random rubble masonry with hard stone in foundation and plinth:Quarry
1373.75
-
-
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)incl. eExtra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
963.33
-
-
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
8314.75
-
-
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
1247.95
-
-
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. Ordinary Rock
383.07
-
-
Supplying and filling in plinth with Dust under floors including, watering, ramming, consolidating and dressing complete.
160.92
-
-
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted
thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of
Engineer -in - charge.
632.99
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, Columns, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
248.04
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
47.76
-
-
Providing & fixing corrugated pre colour coated G.S sheet roofing with polymer coated J or L hooks, nuts,bolts washers (0.50 mm thick) complete job using approved brand as directed by Engineer incharge
680.64
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
224
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 12.2 Flashings/ Aprons.(Upto 600 mm)
100
-
-
Providing and fixing G.I eves boarding sheets of required thickness as directed by EIC.
147.87
-
-
Providing and fixing of imported K.D wood work in frames of doors, windows, clerestory windows, partitions and other frames, wrought framed and fixed in position with hold fast, lugs or with dash fasteners of required dia and length including all carriage of materials as involved upto site of work as directed by EIC complete.
9.9
-
-
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge K D wood
92.55
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.K D wood
92.55
-
-
Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).K D Wood
72.27
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.K D wood
79.41
-
-
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
837.99
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
837.99
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
644
-
-
Providing and fixing of hardware fittings of approved brand including necessary screws etc.
-
-
-
A) T.Bolts
-
-
-
i) 100 mm
520
-
-
ii) 150 mm
86
-
-
B) Handles
-
-
-
i) 100 mm
260
-
-
ii) 150 mm
86
-
-
C) L-drops
-
-
-
i) 200 mm
36
-
-
e Eye hooks.
-
-
-
i) 200 mm
130
-
-
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6
2624.85
-
-
CEMENT PLASTER (IN COARSE SAND)
12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 coarse sand)
7154.16
-
-
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1030.87
-
-
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
3314.34
-
-
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work over and including priming coat with water thinnable cement primer.
2903.7
-
-
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1529.97
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
215.39
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
96.14
-
-
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate
1264.54
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
246.83
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
1040.24
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
1040.24
-
-
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Udaipur green marble
165.26
-
-
Providing and fixing of Fixed Glass Panes including wooden fillets, nails etc complete job (3.5 mm thick float glass).
82.83
-
-
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN- 16 pipe.
-
-
-
a. 25mm OD(SDR-7.4)
400
-
-
b. 32 mm OD
380
-
-
b. 50 mm OD
350
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
a. 25mm OD.
1
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
b. 40mm OD.
2
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
b. 50mm OD.
2
-
-
Providing and fixing in position PVC floor traps including all fittings complete.
a. 100mm dia.
8
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
a. 25mm OD.
1
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
b. 40mm OD.
2
-
-
Providing and fixing (PPR) Ball valve including fittings complete.
b. 50mm OD.
2
-
-
Providing and fixing in position PVC floor traps including all fittings complete.
a. 100mm dia.
20
-
-
Providing and fixing in position PVC floor traps including all fittings complete.
b. 75 mm dia.
28
-
-
Providing and fixing PVC cowl 50mm dia including all fittings complete.
6
-
-
Providing and fixing PVC stay and clamps for PVC pipes.
a) 100mm dia.
28
-
-
Providing and fixing of bend of required degree including all fittings complete.
a) 100mm dia.
12
-
-
Providing and fixing of bend of required degree including all fittings complete.
b) 75 mm dia.
12
-
-
Providing and fixing of plain bends including all fittings complete.
a) 100 mm dia.
8
-
-
Providing and fixing of plain bends including all fittings complete.
b) 75mm dia.
8
-
-
Providing and fixing of Tee - junction all inclusive.
a) 100mm dia.
8
-
-
Providing and fixing of Tee - junction all inclusive.
b) 75mm dia.
4
-
-
Providing and fixing PVC reducer 100 – 50 mm dai including all fittings complete.
6
-
-
Providing and fixing of plain bends including all fittings complete.
a) 100 mm dia.
20
-
-
Providing and fixing of plain bends including all fittings complete.
b) 75mm dia.
20
-
-
Providing and fixing of Tee - junction all inclusive.
a) 100mm dia.
20
-
-
Providing and fixing of Tee - junction all inclusive.
b) 75mm dia.
4
-
-
Providing and fixing PVC reducer 100 – 50 mm dai including all fittings complete.
6
-
-
Providing and fixing of water heater geysers of approved brand and manufacture with ISI certified mark make of 50 litre capacity including all fittings/ fixtures as required complete.
22
-
-
Providing and fixing 15 mm nominal bore C.P. brass Health Faucet of approved quality conforming to IS : 8931 complete all inclusive.
28
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete all inclusive.
80
-
-
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg complete all inclusive.
9
-
-
Providing and fixing C.P brass single long swing type lever wall sink mixer including fittings complete all inclusive.
1
-
-
Providing and fixing C.P brass double lever wall mixer with concealed shower including all fitting and accessories complete all inclusive.
28
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid complete all inclusive.
28
-
-
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap..
9
-
-
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
9
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x510mm bowl depth 200mm complete all inclusive.
1
-
-
Providing and fixing PVC waste pipe 32mm.
10
-
-
Providing and fixing 8mm dia C.P / SS jet with flexible tube upto 1 Mtr long complete.
28
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
28
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
28
-
-
Providing and fixing of PTMT grating 100mm dia including all fittings complete.
33
-
-
Providing and fixing of PVC connections 15mm dia including all fittings complete.
82
-
-
Providing and fixing of Master trap of required size and shape as including all fittings as directed by EIC complete all inclusive.
2
-
-
Providing and fixing 2HP motor Crompton / Havells or equivalent make including all fittings and fixtures as required complete as directed by EIC, all inclusive.
2
-
-
Constructing masonary chamber of specified of specified size, in brick work work with common burnt clay bricks of class designation 7.5 in cement mortar 1:4 and RCC top slab 1:1.5:3 mix including necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement complete as per standard design and size as directed by EIC complete.
40
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
10000
-
-
Providing and fixing soil waste and vent pipes including all fittings complete. (PVC S&S pipe)
-
-
-
a) 100mm dia.
210
-
-
b) 75mm dia.
230
-
-
c) 150 mm dia.
260
-
-
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
All kinds of soil :
1552
-
-
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
5150
-
-
Providing and laying GSB/Nallah Muck including supplying, spreading to temnplate and consolidation with 80-100KN PRR including all carriage lead, lift, loading unloading complete as per direction of EIC
697.2
-
-
Supply and stacking of graded stone aggregate at site of size range 63-45mm Grade-IInd with stone screening/Chippings 13.20mm size nominal size type -A stone dust at site including all Carriage and Laying water bound macadam with specified stone aggr., stone screenings and binding material incl. Screening, sorting ,spreading to template and consolidation with PRR with 8-10 tone capacity etc including all carriage upto site of work for avg lead of 40km complete
487.5
-
-
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
487.5
-
-
Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm
6500
-
-
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 16.63.1 50 to 100 mm average compacted thickness 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
325
-
-
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.25 mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
6500
-
-
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
6500
-
-
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
390
-
-
Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete.900 mm dia. R.C.C. pipe
60
-
-
P/L stone soling (Hand packed) in trenches incl. ramming, dressing ,watering etc. incl. all leads, lifts and carriage upto site of work complete.
18
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
18
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
43.2
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
383.72
-
-
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/Regulatory sign boards
17.44
-
-
Add for carriage
-
-
-
for Sand
1493.4
-
-
For Aggregate
3369.89
-
-
For Brick
94697
-
-
Part I:- Electric Part main blocks
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia .), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
416
-
-
Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit.
1215
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Leiva )
90
-
-
Wiring for lighting circuits/ inverter circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1690
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia.)
90
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
30
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
(a) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
145
-
-
(b) 2 X 10sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
145
-
-
(c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire ( sub main wire from main panel to Individual DB's)
145
-
-
Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete
-
-
-
25mm
210
-
-
Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends.
90
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
-
-
Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.)
25
-
-
Supply installation testing and commissioning of AC/DC Bell including Bell push and battries GM/ standard make
3
-
-
Sub Head-2 - Fixtures and Fittings
-
-
-
Supply installation testing and commissioning of 12 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation..
38
-
-
S/F testing and comm. Of 20 Watt + 4 ft. wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with minimum system lumen efficacy of 100 lm/W and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation.
240
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton make, sample to be approved before installation..
66
-
-
Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tivsha/schneider Livia /Havell Coral make.
66
-
-
Supply installation testing and comm. Of 250mm -300mm sweep exhaust fan Shutter type of havell /USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections.
16
-
-
Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way (4 + 24), Double door
10
-
-
S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ L&T ./equivalent make as directed by engineer incharge.
-
-
-
a) 6-32 Amp SP MCB
198
-
-
b) 40-63amp DP MCB
26
-
-
Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound.
4
-
-
S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.
-
-
-
a) 120 sq.mm 3.5 core
50
-
-
b) 10 Sq m 2 core
150
-
-
c) 95 Sq.m 3.5 Core
50
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
160 mm dia (OD-160 mm & ID-135 mm nominal)
100
-
-
Supply installation testing and comm. of flood light 100 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.
8
-
-
Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 3 No.
22
-
-
Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.
-
-
-
Normal INCOMING:
-
-
-
a)250A 4P MCCB 50 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make.
1
-
-
b) 4 No. of Aluminium Bus Bar of 400 Amp.
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
d) onload Change over switch 160 Amp for generator.Front operated.
1
-
-
e) 4 No. of Aluminium Bus Bar of 250 Amp.
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
Inverter Incommer
-
-
-
(a) 100 amp DP MCB
2
-
-
(b) 200 Amp 2 strip bus bar
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
c) space for 12 way MCB's
1
-
-
OUTGOING:
-
-
-
b)100 amp DP MCCB 10 K Legrand/ Shinider/ABB make, sample to be approved before installation..
3
-
-
Community Hall
-
-
-
Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 3 No.
22
-
-
Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.
-
-
-
Normal INCOMING:
-
-
-
a)160A 4P MCCB 50 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make.
1
-
-
b) 4 No. of Aluminium Bus Bar of 200 Amp.
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
d) onload Change over switch 100 Amp for generator.Front operated.
1
-
-
e) 4 No. of Aluminium Bus Bar of 250 Amp.
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
Inverter Incommer
-
-
-
(a) 100 amp DP MCB
1
-
-
(b) 200 Amp 2 strip bus bar
1
-
-
c)Digital meters and phase indicators -1 set.
1
-
-
c) space for 12 way MCB's
1
-
-
OUTGOING:
-
-
-
b)100 amp DP MCCB 10 K Legrand/ Shinider/ABB make, sample to be approved before installation..
2
-
-
c) space for 24 way MCB's
1
-
-
Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block. And 12 watt LED Lamp, Philips/Trulux/Wipro make / sample to be approved before installation..
4
-
-
Supplying and fixing Double door following way, single pole and neutral, sheet steel, MCB distribution board ( Indo Asian/ legrand/ Schinider/SSK make) , 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 8 way
1
-
-
Miscellaneous items for existing blocks.
-
-
-
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:Udaipur green marble
3346.12
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
8500.8
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
2384.04
-
-
P/F M.S. Grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc incl priming coat with approved steel primer complete. Fixed to openings/wooden frames with rawl plugs screws etc.
2942.84
-
-
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work over and including priming coat with water thinnable cement primer.
51754.88
-
-
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
16480.2
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm (Payment for grouting of joints to be made separately).)
1807
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
1807
-
-
Providing and fixing of Fixed Glass Panes including wooden fillets, nails etc complete job (3.5 mm thick float glass).
779.22
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (Including Hollow Tube of Structural Steel Size 25mm x 25mm & Scaffoldding.(SSR 2020 item no. 8.32)
898.17
-
-
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work
6775.21
-
-
Extra for pre finished nosing to treads of steps of marble stone
2941.64
-
-
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
1256.71
-
-
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
312
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) truss etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding etc. complete. Hot finished welded type tubes
28680.47
-
-
Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,
54.14
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2066.9
-
-
Providing and fixing of water heater geysers of Venus/ racold or equivalent make of 50 litre capacity including all fittings/ fixtures as required complete.
312
-
-
Providing and fixing of water heater geysers of Venus/ racold or equivalent make of 25 litre capacity including all fittings/ fixtures as required complete.
312
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 25mm nominal bore, 152mm long, weighing not less than 440gms complete all inclusive.
52
-
-
Providing and fixing 15 mm nominal bore C.P. brass Health Faucet of approved quality conforming to IS : 8931 complete all inclusive.
312
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 complete all inclusive.
3744
-
-
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg complete all inclusive.
312
-
-
Providing and fixing C.P brass single long swing type lever wall sink mixer including fittings complete all inclusive.
312
-
-
Providing and fixing C.P brass double lever wall mixer with concealed shower including all fitting and accessories complete all inclusive.
312
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid complete all inclusive.
312
-
-
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps complete all inclusive.
312
-
-
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
312
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x510mm bowl depth 200mm complete all inclusive.
312
-
-
Providing and fixing PVC waste pipe 32mm.
624
-
-
Providing and fixing 8mm dia C.P / SS jet with flexible tube upto 1 Mtr long complete.
312
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
312
-
-
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
312
-
-
Providing and fixing toilet paper holder C.P. brass complete.
312
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
624
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
312
-
-
Providing and fixing of PTMT grating 100mm dia including all fittings complete.
1248
-
-
Providing and fixing of PVC connections 15mm dia including all fittings complete.
2184
-
-
Providing and fixing of Master trap of required size and shape as including all fittings as directed by EIC complete all inclusive.
13
-
-
Providing and fixing 2HP motor Crompton / Havells or equivalent make including all fittings and fixtures as required complete as directed by EIC, all inclusive.
13
-
-
Constructing masonary chamber of specified size, in brick work work with common burnt clay bricks of class designation 7.5 in cement mortar 1:4 and RCC top slab 1:1.5:3 mix including necessary excavation, foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement complete as per standard design and size as directed by EIC complete.
286
-
-
Providing and fixing soil waste and went pipes including all fittings complete. (PVC S&S pipe) 100mm dia.
3250
-
-
Providing and fixing soil waste and went pipes including all fittings complete. (PVC S&S pipe)75mm dia.
1885
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inletSize 200mm x 200 mm
312
-
-
Providing and fixing C.P. brass shower arm with 15 or 20 mm inlet
312
-
-
Providing and fixing Tremble Holder.
312
-
-
Providing and fixing SS rob hook (6 point hanger).
312
-
-
Providing and fixing Soap case.
624
-
-
Providing and fixing CP waste coupling 40-32 mm nominal dia.
624
-
-
Providing and fixing CP extension nipple 25-15 mm dia.
2496
-
-
Providing and fixing CP extension nipple 40-15mm dia.
1560
-
-
External work including trenching, refilling etc PN-10 pipe 63 mm OD (SDR-11)
650
-
-
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick
14736.34
-
-
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
51754.89
-
-
Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :(Imported K D wood)
1069.99
-
-
Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Imported K D wood)
1946.71
-
-
Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 3.50mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. :(Imported K D wood)
1069.99
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.:(Imported K D wood)
887.4
-
-
Providing and fixing Hardware fittings of approved brand including necessary secrews etc
-
-
-
Handle 100mm
4316
-
-
Handle 150mm
2600
-
-
Tower bolt 100mm
8632
-
-
Tower bolt 150mm
2600
-
-
I hook
2158
-
-
L droop with lock
325
-
-
L droop
960
-
-
L droop for fornt doors of required sizeof approved brand and as directed by EIC
32
-
-
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood/steel work.
12947.27
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
15467
-
-
Supply installation testing and commissioning of 12 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation..
1872
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA /Havells /Crompton make, sample to be approved before installation..
624
-
-
Add GST by applying factor @0.219512 on basic total Amount of items.
180146316.87
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements