Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Healthcare and Medicine
Eprocure
Opening Date13 Aug 2024
Closing Date22 Aug 2024
Tender Amount₹ 20,00,000
Costs
EMD
₹ 40,000Document Cost
₹ 800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_256942_2Tender No
Fresh etendering NIT No. 15 Karan NagarTender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Carpenter 2nd class
1
800
800
... More
Mason 1st class.
1
850
850
... More
Mason 2nd class.
1
800
800
... More
Plumber.
1
850
850
... More
Black Smith.
1
850
850
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 1 meter from cutting edge
1
479
479.3
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
1
256
256.85
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
... More
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
7275
7275.25
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
6591
6591.25
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
1
6540
6540.45
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
1
5673
5673.4
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
1
4826
4826.5
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.
-
-
-
... More
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
9106
9106.5
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
8422
8422.45
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
7564
7564.8
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
1
7504
7504.6
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
1
6644
6644.55
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size
1
4469
4469.25
... More
Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
1
346
346.7
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
1
416
416.5
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
7104
7104.35
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1
120
120.8
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1
138
138.2
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
1
156
156.9
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
1
212
212
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
1
286
286.35
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1
628
628.95
... More
Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
... More
Shelves (cast-in-situ)
1
718
718.2
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1
577
577.55
... More
Columns, pillars, piers, abutments, posts and struts.
1
742
742.55
... More
Stairs (excluding landings) except spiral staircases.
1
851
851.15
... More
Spiral staircases (including landings)
1
676
676.25
... More
Arches, domes, vaults upto 6 m span
1
2281
2281.2
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
1
262
262.2
... More
Above 20 cm wide
1
1145
1145.1
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in
-
-
-
... More
Cement mortar 1:3 ( 1 cement : 3 coarse sand)
1
981
981.5
... More
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
947
947.25
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1
159
159.65
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) imported kail wood:
1
60000
60000
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). imported kail wood: (35mm Thick))
1
3200
3200
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of
Engineer-in-charge (35mm Thick)
1
3000
3000
... More
Providing and fixing wire gauze using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows including cost of beading complete.
1
800
800
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
1
207
207.35
... More
Providing and fixing of chicken mesh wherever required of specified size including cost of beading and nails complete.
1
500
500
... More
Providing and fixing 30-35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick laminated board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) in fittings imported kail wood:
1
4000
4000
... More
Providing and fixing 30-35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including cost of 25-35mm thick paneling of approved design with required beading/moldings. imported kail wood:
1
4000
4000
... More
Providing and fixing 30-35 mm thick paneled/ flush door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws Readymade ornamental modular, factory manufactured machine made of hard wood teak finished, of approved quality, color and shade.
1
4500
4500
... More
Providing and fixing 32 mm thick paneled door shutters with wood carved panels (Carving on one side) including polishing, and ISI marked black enameled M.S. butt hinges with necessary screws as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) imported kail wood:
1
5500
5500
... More
Providing and fixing 32 mm thick paneled door shutters with wood carved panels (Carving on both sides) including polishing, and ISI marked black enameled M.S. butt hinges with necessary screws as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) imported kail wood:
1
6500
6500
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position imported kail wood.
1
55000
55000
... More
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete
-
-
-
... More
First class Budloo/Fir wood
1
126796
126796.45
... More
Imported Kail Wood
1
65000
65000
... More
First Class Popular Wood
1
38000
38000
... More
Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including providing and fixing of ground frame work (50x25mm or as specified) of first class Budloo wood/ 19mm ply including cost of screws, wooden plugs etc. complete as per directions of EIC
-
-
-
... More
Made from imported wood
1
2200
2200
... More
Made from Budloo wood
1
2500
2500
... More
Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places.
-
-
-
... More
4 mm thick
1
350
350
... More
6 mm thick
1
600
600
... More
12 mm thick
1
1250
1250
... More
19 mm thick
1
1650
1650
... More
Providing and fixing water proof BWR ply wood ISI marked including cost of nails adhesive etc. complete at all places.
-
-
-
... More
6 mm thick
1
850
850
... More
12 mm thick
1
1500
1500
... More
19 mm thick
1
1950
1950
... More
Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete at all places.
-
-
-
... More
6 mm thick
1
1000
1000
... More
12 mm thick
1
1200
1200
... More
18-19 mm thick
1
1550
1550
... More
Providing and fixing of 19mm thick commercial block board at all places including cost of nails and adhesive complete. Thickness/ Pattern/ Design to be approved by EIC
1
1200
1200
... More
Providing and fixing of Dulmica/ sun mica sheeting including cost of nails and adhesive complete.
-
-
-
... More
0.8-1 mm thick for lining
1
900
900
... More
0.4-0.5mm thick for lining
1
500
500
... More
Providing and fixing wood work in fencing that is in planks of the following nominal size excluding cost of posts and runners. 1st class Budloo wood. (ornamental)
-
-
-
... More
20 mm thick.
1
1300
1300
... More
25 mm thick.
1
1600
1600
... More
35 mm thick.
1
2250
2250
... More
Providing and fixing of ornamental cornice of following size. 1st class budloo/imported wood.
-
-
-
... More
40-50 mm face
1
150
150
... More
65 mm face
1
175
175
... More
75 mm face
1
200
200
... More
Providing and fixing of PVC edge beading
-
-
-
... More
12 mm face
1
40
40
... More
19 mm face
1
50
50
... More
25 mm face
1
66
66
... More
Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported wood including applying priming coat of approved quality primer.
1
1400
1400
... More
Providing and fixing of planed eaves boarding 250mm x 30mm size of 1st Class imported wood.
1
650
650
... More
Providing and fixing of planed eaves boarding 250mm x 30mm size of 1st Class Budloo wood.
1
720
720
... More
Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood.
1
20
20
... More
Renewing glass panes, with putty and nails wherever necessary including raking out old putty :
-
-
-
... More
Float glass panes of thickness 4.0 mm(weight not less than
10kg/sqm)
1
991
991
... More
Float glass panes of thickness 5.0 mm(weight not less than 12.5
kg/sqm)
1
1130
1130.85
... More
Add extra for using frosted/ opaque glass
1
100
100
... More
Extra for using glass film of required design/ pattern
1
13
13
... More
Providing and fixing of reflective glass panes 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size.
1
1000
1000
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
-
-
-
... More
0.63 mm thick with zinc coating not less than 275 gram/m2
1
974
974.05
... More
0.50 mm thick with zinc coating not less than 275 gram/m2
1
852
852.5
... More
Providing and fixing pre-coated galvanized iron profile sheets/corrugated/tiled (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1
706
706.5
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.
-
-
-
... More
0.63 mm thick with zinc coating not less than 275 gram/m2
1
761
761.95
... More
0.50 mm thick with zinc coating not less than 275 gram/m2
1
690
690.85
... More
Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm)
1
508
508.7
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x 25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
-
-
-
... More
GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
1
1760
1760.5
... More
GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
1
2026
2026
... More
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit
1
2006
2006.35
... More
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
1
1303
1303.9
... More
8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
1
1964
1964.2
... More
Providing and fixing of acoustic insulation with 24 gauge G.I net wire netting mesh or frame with G.I stipules etc.
-
-
-
... More
50mm thick filled in polythene bags.
1
650
650
... More
100mm thick filled in polythene bags.
1
750
750
... More
150mm thick filled in polythene bags.
1
900
900
... More
Providing and fixing of jute fabric as per approved sample with bituminous paint complete.
1
500
500
... More
Providing and fixing of 10-12mm thick P.O.P. perforated/ non perforated tiles of 2'x 2'size of approved quality including jointing complete.
1
650
650
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
25mm thick with 12.5 mm nominal size stone aggregate.
1
409
409.25
... More
40mm thick with 20 mm nominal size stone aggregate.
1
510
510.25
... More
50 mm thick with 20mm nominal size stone aggregate.
1
562
562.15
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1
1229
1229.1
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
-
-
-
... More
Size of tile 600x600 mm
1
1395
1395.1
... More
Size of tile 1000x1000 mm
1
2529
2529.9
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of tile 600x600 mm
1
1490
1490.05
... More
Size of tile 1000x1000 mm
1
2628
2628.3
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
-
-
-
... More
Size of tile 600x600 mm
1
253
253.7
... More
Size of tile 1000x1000 mm
1
145
145.4
... More
Providing and fixing of Buj tile cladding of required pattern. Shade and design over 20mm thick cement plaster 1:3 mix (1 cement: 3coarse sand) including jointing with neat cement slurry complete.
1
1000
1000
... More
Providing and fixing of Interlocking/Chequered precast cement concrete tiles colored(rubber finish) in foot paths & courtyards jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and cleaning etc. complete on 20mm thick layer of dry sand .
-
-
-
... More
40mm thick.
1
950
950
... More
50mm thick.
1
1150
1150
... More
75mm thick.
1
1350
1350
... More
Providing and laying mud flooring mixed with chopped dry wheat grass including leveling and finishing to the following thickness complete in all respects.
-
-
-
... More
75mm thickness.
1
200
200
... More
50mm thickness.
1
150
150
... More
Providing and laying of polythene of specified thickness under mud flooring complete.
1
50
50
... More
Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.
-
-
-
... More
Ganite of any color other than black as approved by EIC
1
4700
4700
... More
Black Granite as approved by EIC
1
5500
5500
... More
Extra for moulding and finishing
1
250
250
... More
Providing and fixing of laminated board flooring AC IV using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete. (Sample to be approved by EIC)
1
2000
2000
... More
Providing and fixing of MDF cornice 25mmx20mm In size.
1
200
200
... More
Providing and fixing of MDF cornice 2.5" In face.
1
250
250
... More
12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand)
1
266
266.2
... More
15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1
241
241.25
... More
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
1
233
233.55
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
... More
1 mm thick
1
138
138.1
... More
2 mm thick
1
181
181.05
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
18
18.7
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
14
14.5
... More
Removing lime punning/POP from walls including sand papering and disposal of rubbish as directed etc. complete.
1
20
20
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.
1
164
164.6
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Old work (one or more coats).
1
52
52.95
... More
Distempering with 1st quality acrylic washable distemper (readymade) of approved manufacturer and of required shade and color complete as per manufacturer's specification.
-
-
-
... More
One or more coats on old work
1
50
50.75
... More
Two or more coats on new work
1
89
89.9
... More
Finishing walls with water proofing cement paint of required shade:
-
-
-
... More
Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
1
94
94.85
... More
Old work (one or more coats applied @ 2.20 kg/10sqm) complete
1
64
64.45
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
... More
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
-
-
-
... More
Two or more coats on new work
1
131
131.85
... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
1
194
194.65
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work
1
86
86.75
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
136
136.75
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
1
88
88.6
... More
Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)
1
178
178.45
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
1
149
149.05
... More
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:
-
-
-
... More
1:3:6 or richer mix (i/c equivalent design mix)
1
1725
1725.2
... More
1:4:8 or leaner mix (i/c equivalent design mix)
1
1064
1064.55
... More
Demolishing brick work manually/by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
1
1458
1458.45
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) From brick work in cement mortar
1
4
4.94
... More
.Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead
-
-
-
... More
Of area of 3 sqm. and below
1
285
285.25
... More
Of area beyond 3 sqm.
1
390
390.5
... More
Dismantling steel work in single sections including dismembering and stacking within 50 meters lead in R.S. Joists
1
2
2.55
... More
Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead.
-
-
-
... More
Of sectional area 40 sqcm. and above.
1
3488
3488.65
... More
Of sectional area below 40 sqcm.
1
13
13.95
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
1
57
57
... More
Aluminium Work Providing and fixing Aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, dashfastners, handles, hinges, all complete as per architectural drawings and the directions of Engineer-in-charge. (excluding Glazing, sliding channels/ sliding arrangement and other fittings complete) but including 12mm thick thick prelaminated particle board
-
-
-
... More
Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Using 2.5"x1.5" sections 18 Gauge thick
1
320
320
... More
Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)Using 2.5"x1.5" sections 16 Gauge thick
1
360
360
... More
Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)Using 4"x1.75" sections 18 Gauge thick
1
400
400
... More
Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Using 4"x1.75" sections 16 Gauge thick
1
460
460
... More
Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 2.5"x1.5" sections 18 Gauge thick
1
360
360
... More
Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 2.5"x1.5" sections 16 Gauge thick
1
420
420
... More
Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 4"x2" sections 18 Gauge thick
1
420
420
... More
Powder coated aluminum (minimum thickness of powder coating 50 micron) Using 4"x2" sections 16 Gauge thick
1
500
500
... More
Extra for using 5mm float glass instead of 12mm thick prelaminated particle board
1
300
300
... More
Extra for using 5mm frosted/ blind glass instead of 12mm thick prelaminated particle board
1
400
400
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
1
947
947.4
... More
Pre-laminated particle board with decorative lamination on both
sides.
1
933
933.35
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
... More
22.3.1 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
1
1061
1061.95
... More
22.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
... More
With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
1
1584
1584.45
... More
Providing and fixing of both sides pre-laminated ply board 12mm thick in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item):
1
1150
1150
... More
Providing and fixing of lock for aluminium doors of approved make as per directions of EIC.
1
650
650
... More
Providing and fixing of G-Channel,wheel sets,etc complete set for sliding door .
1
3200
3200
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
With stainless steel cover/ brass plate minimum 1.25 mm thickness.
1
2407
2407.05
... More
Hydraulic Door Closer
1
1800
1800
... More
Providing and fixing 6 mm dia. G.I. level adjusting hangers (up to 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia. and 50 mm long, complete as per direction of Engineer -in-charge.
1
100
100
... More
Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. Including frame work complete as per direction of Engineer-in-charge.
-
-
-
... More
ACP 3.5mm thick of required color
1
3600
3600
... More
ACP 4.0mm thick of required color
1
4200
4200
... More
Providing and laying G.S.B. grade including compacting, watering and consolidation with power road roller to the required gradient and camber including all carriages of material complete.
1
1400
1400
... More
Providing and laying G.S.B. grade including compacting, ramming, watering and carriage complete.
1
1250
1250
... More
Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete.
1
1200
1200
... More
Supplying and Filling earth, including carrying by lorry, placing, dressing and ramming in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with ½ tone roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power road roller of minimum 8 tones, filling in ground depressions, Including of all carriages from source to site complete.
1
850
850
... More
Engagement of tipper including fuel charges complete.
1
5000
5000
... More
Engagement of excavator (JCB) in all terrains including fuel charges complete.
1
1600
1600
... More
Engagement of hand cart
1
200
200
... More
Providing and fixing of wardrobe, almirah, drawer locks (Sample to be approved by EIC)
1
350
350
... More
Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes.
-
-
-
... More
20 mm
1
100
100
... More
25 mm
1
120
120
... More
Providing and fixing of door closer capsule type of standard make
1
650
650
... More
Providing and fixing of door closer spring type of standard make
1
480
480
... More
Providing and fixing of following fittings
-
-
-
... More
Aldrop
1
350
350
... More
Tower Bolt 100mm
1
90
90
... More
Tower Bolt 150mm
1
110
110
... More
Handle 100mm
1
90
90
... More
Handle 150mm
1
100
100
... More
I Hook
1
50
50
... More
Hinges 75mm
1
80
80
... More
Hinges 100mm
1
90
90
... More
Lockable sliding Aldrop 250-300mm long (Godrej/ Link/Ramson or equivalent)
1
1250
1250
... More
Providing and fixing bright finished 100mm mortice lock with 6 levers with pair of handles for aluminum doors of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge
1
2000
2000
... More
Manufacturing and fixing of computer tables of required size and height of 19mm thick solid core ply sheet (Ply to Ply) exposed surface to be laminated with Dulmica sheeting including cost of key boards (readymade), racks drawers, cupboards, cost of brass knobs / locks of approved make and other necessary fittings and fixtures of approved quality and make. (Measurements be made on top surface only)
1
7000
7000
... More
Manufacturing and fixing of computer tables of required size and height of 19mm thick both sides laminated board of specified brand (as per design and approved drawings) fitted with support keys, key boards( readymade), racks and drawers including cost of brass knobs / locks of approved make and other necessary fittings and fixtures of approved quality and make. (Measurements be taken on top surface only for payment)
1
6500
6500
... More
Providing and fabrication of ward robes (ornamental) of approved quality 19mm Ply board in sides, shelves and wherever required including 6mm ply wood on back and 19MM ply board in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed face of approved design and drawings including (painting two or more coats of synthetic enamel paint of approved quality and color inside) including cost of following aluminum fittings and locks of approved make.15mm dia. M.S. pipe chromium plated with necessary brackets 4'-0" length and including all other necessary accessories complete in all respects. Including fixing with dashfasteners wherever required (For payments front face to be measured).
-
-
-
... More
50-60 cm deep
1
9000
9000
... More
40-45 cm deep
1
6800
6800
... More
20-30 cm deep
1
5400
5400
... More
extra for using ply to ply instead of board (Face measurement)
1
1000
1000
... More
extra for using lining instead of painting on internal surface as per measurement - 12mm
1
400
400
... More
Extra for using 10-12mm ply instead of 6mm on back side of Wardrobe/ Kitchen cabinets
1
200
200
... More
Extra for using MDF shuttes ornamental type of required thickness instead of ply/ pine shutters (Face measurement)
1
600
600
... More
Supplying and fixing of rolling shutters of approved make made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No:2 and M. S. top cover of required thickness for rolling shutters (80x1.25mm M.S Laths with 1.25 mm thick top cover)
1
3305
3305
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer
1
10401
10401.5
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5493
5493.25
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
1
5632
5632.4
... More
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required:Range of three squatting plates with 10 liter P.V.C. automatic flushing cistern.
1
15941
15941.15
... More
Providing and fixing wash basin with CI/MS/ brackets including painting of fittings and brackets, cutting and making good walls wherever required white vitreous china wash basin size 630x450mm with 32mm dia. C.P. brass union & flexible waste pipe (Jaquar/ Hindware/ Cera/ Kerrovit or equivalent)
1
4500
4500
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
2800
2800
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with fittings and fixtures complete. 10 liters capacity- white (Sample to be approved by EIC)
1
1700
1700
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete. (Sample to be approved by EIC)
1
1300
1300
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm size respectively.
1
1400
1400.05
... More
Providing and fixing Salem stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x510mm bowl depth 200mm. (Sample to be approved by EIC)
1
4380
4380.5
... More
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm.
1
3801
3801.2
... More
Providing and fixing of white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 liter white PVC automatic flushing cistern (Sample to be approved by EIC)
1
5342
5342.35
... More
Providing and fixing 600x450mm beveled edge mirror of specified brand mounted on 6mm thick plywood/hardboard including cost of wooden/PVC plugs and CP brass screws.
1
1500
1500
... More
Providing and fixing beveled edge mirror of specified brand mounted on 6mm thick plywood/ hardboard including cost of wooden/PVC plugs and CP brass screws.
-
-
-
... More
Circular shape 450mm dia.
1
1381
1381.25
... More
Rectangular shape 453x357mm.
1
1156
1156.25
... More
Oval shape 450x350mm
1
1235
1235.75
... More
Any required size 5mm thick including necessary S.S Caps, hole in mirror etc
1
400
400
... More
Providing and fixing of C.P grating 100mm size. ISI
1
350
350
... More
Providing and fixing of G.I pipes (class B pipes) complete with G.I fittings and clamps including cutting and making good the walls etc. internal work (Exposed on Walls) (Sample to be approved by EIC)
-
-
-
... More
15mm dia. Nominal bore
1
360
360.55
... More
20mm dia. Nominal bore
1
431
431.2
... More
25mm dia. Nominal bore
1
529
529.7
... More
32mm dia. Nominal bore
1
634
634.65
... More
40mm dia. Nominal bore
1
768
768.5
... More
50mm dia. Nominal bore
1
1182
1182.15
... More
Providing and fixing of G.I pipes (class B pipes) complete with G.I fittings including trenching and refilling etc. (external work) (Sample to be approved by EIC)
-
-
-
... More
15mm dia. Nominal bore
1
206
206.5
... More
20mm dia. Nominal bore
1
255
255.2
... More
25mm dia. Nominal bore
1
339
339.25
... More
32mm dia. Nominal bore
1
411
411.3
... More
40mm dia. Nominal bore
1
489
489.25
... More
50mm dia. Nominal bore
1
805
805.7
... More
65mm dia. Nominal bore
1
1018
1018.05
... More
80mm dia. Nominal bore
1
1151
1151.2
... More
100mm dia. Nominal bore
1
1434
1434
... More
Providing and fixing of following G.I. fittings. 15 mm nominal bore.(Sample to be approved by EIC)
-
-
-
... More
Elbow
1
53
53
... More
Tee
1
70
70
... More
Union
1
145
145
... More
pvc plug/ G.I Plug
1
30
30
... More
Nipple
-
-
-
... More
50mm long.
1
45
45
... More
75mm long
1
50
50
... More
100mm long
1
60
60
... More
150mm long
1
85
85
... More
Socket
-
-
-
... More
15mm
1
45
45
... More
20mm
1
70
70
... More
25mm
1
90
90
... More
Reducer
-
-
-
... More
15mm-20mm
1
70
70
... More
20mm-25mm
1
100
100
... More
20mm-32mm
1
115
115
... More
25mm-32mm
1
135
135
... More
Providing and fixing of following G.I. fittings. 20 mm nominal bore.(Sample to be approved by EIC)
-
-
-
... More
Elbow
1
80
80
... More
Tee
1
105
105
... More
Union
1
195
195
... More
pvc plug/ G.I Plug
1
35
35
... More
Nipple
-
-
-
... More
50mm long.
1
40
40
... More
75mm long
1
50
50
... More
100mm long
1
55
55
... More
150mm long
1
75
75
... More
Providing and fixing of PVC connection with C.P. brass unions
-
-
-
... More
300mm long.
1
150
150
... More
450mm long
1
200
200
... More
600mm long
1
240
240
... More
Providing and fixing ball valve (brass) of approved quality complete (Sample to be approved by EIC)
-
-
-
... More
15mm dia.
1
650
650
... More
20mm dia.
1
750
750
... More
25mm dia.
1
950
950
... More
40mm dia.
1
1100
1100
... More
Providing and fixing gate valve (brass) of approved quality complete (Sample to be approved by EIC)
-
-
-
... More
15mm dia.
1
650
650
... More
20mm dia.
1
750
750
... More
25mm dia.
1
950
950
... More
40mm dia.
1
1500
1500
... More
50mm dia.
1
2200
2200
... More
Providing and fixing of Ball cock of approved quality and make with plastic float. (PVC type)
-
-
-
... More
15 mm
1
500
500
... More
20 mm
1
600
600
... More
Providing and fixing of flexible PVC Pipe
-
-
-
... More
For Washbasin
1
130
130
... More
For Urinal
1
190
190
... More
Providing and fixing of Ball cock of approved quality and make without plastic float.
-
-
-
... More
15 mm
1
300
300
... More
20 mm
1
350
350
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all required tankey nipples and excluding the base support for tank (Syntax/Comfort or equivalent having valid ISI license) complete
1
8
8.75
... More
Construction of plateform for W.C. with brick masonry in cement mortar 1:6 mix. Including filling of sand and providing of 15mm cement plaster in 1:4 mix. Complete job of size as directed at site
1
2500
2500
... More
Providing and fixing of C.P. Cups for C.P. fittings.
1
60
60
... More
Providing and fixing of C.I. manhole cover heavy duty of following sizes.
-
-
-
... More
12"x12"
1
800
800
... More
18"x18"
1
1500
1500
... More
24"X24"
1
2000
2000
... More
Providing and fixing of water heater (geysers) (Havells/ Hindware/ Jaquar/ Venus or equivalent) including cost of dash fasteners with nuts and washers
-
-
-
... More
60 Litre
1
19000
19000
... More
50 Litre
1
18000
18000
... More
40 Litre
1
15000
15000
... More
35 Litre
1
13500
13500
... More
25 Litre
1
10500
10500
... More
Providing and fixing of PVC connection for wash basins, geysers etc.
-
-
-
... More
30-45 cm in length
1
250
250
... More
60-90 cm in length
1
320
320
... More
Providing and fixing Geyser elements (as per Geyser type) dry/ wet
1
750
750
... More
Providing and fixing Geyser thermostat
1
650
650
... More
Providing and fixing Drain plug with washer.
1
200
200
... More
Providing and fixing Safety valve for geysers.
1
350
350
... More
Providing and fixing water washers for geysers.
1
200
200
... More
Providing and fixing of auto thermo cut for geyser.
1
450
450
... More
Providing and fixing of Baja for water geyser as per Geyser Type
1
1800
1800
... More
Providing and fixing of matte cover for geyser.
1
1000
1000
... More
Providing and fixing of pressure water ball Valve
1
400
400
... More
Providing and fixing of C.P. Swan cock 3 way of approved quality.
1
3000
3000
... More
Providing and fixing of C.P Laboratory Swan cock 3 way (Tall) of approved quality.
1
3500
3500
... More
Providing and fixing C.P. brass bib cock of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) 15mm nominal bore with flange
-
-
-
... More
Short Body
1
1100
1100
... More
Long Body
1
1250
1250
... More
Providing and fixing of 15mm size chromium plated cast brass pillar cock of approved quality(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
1250
1250
... More
Providing and fixing of 15mm size chromium plated cast brass angle valve of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with wall flange
1
1200
1200
... More
Providing and fixing of 15mm size chromium plated cast brass wash basin mixers as menioned below (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
-
-
-
... More
Pillar Type 2 Knobs
1
4500
4500
... More
Pillar Type Single Lever
1
4500
4500
... More
Wall Mounted type
1
5000
5000
... More
Providing and fixing of 15mm size chromium plated cast brass sink mixer Wall mounted/ Counter mounted of approved quality.(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
4500
4500
... More
Providing and fixing of hand shower with chain of approved quality.(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
1800
1800
... More
Providing and fixing of shower including shower arm of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
1
850
850
... More
Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic of approved quality. (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
1
4500
4500
... More
Providing and fixing CP Brass telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
6200
6200
... More
Providing and fixing of 15mm size chromium plated cast brass wall mixer with bend pipe for head shower of approved quality. (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
1
5500
5500
... More
Providing and fixing C.P Head Shower of required (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
1000
1000
... More
Providing and fixing arm for head shower of required length (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
500
500
... More
Providing and fixing telephonic chain for wall mixer (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
500
500
... More
Towel ring 20mm dia. (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
1
600
600
... More
Towel rod (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
1
950
950
... More
Soap Dish case/ Toilet Paper Holder
1
400
400
... More
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
1
902
902.5
... More
C.P./PVC Long bends of required size of approved quality.
1
250
250
... More
C.P. Waste for wash basin of approved quality
1
325
325
... More
Providing and fixing of pvc manhole cover of approved make of following sizes. (Heavy type)
-
-
-
... More
12"x12"
1
400
400
... More
18"x18"
1
600
600
... More
24"X24"
1
800
800
... More
Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC.
1
1200
1200
... More
Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness.
1
850
850
... More
Construct brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. (Depth as per site requirement)
-
-
-
... More
Size 90 x 90 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size/ Concrete Slab. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
1
6500
6500
... More
Size 60 x 60 cm deep including RCC/C.I. manhole cover medium duty with frame of size 60x60mm size/ Concrete Slab. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
1
5500
5500
... More
Size 45 x 45 cm deep including RCC/C.I. manhole cover medium duty with frame of size 45x45mm size/ Concrete Slab. With F.P.S. bricks with class designation 75 and with crushed stone aggregate complete in all respects.
1
4500
4500
... More
Providing and fixing of PVC pipe (Type "B") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation. (Sample to be approved by EIC)
-
-
-
... More
150mm dia. Pipe (Including necessary fittings)
1
650
650
... More
100mm dia. Pipe
1
525
525
... More
75mm dia. Pipe
1
450
450
... More
50mm dia. Pipe (Push Type)
1
300
300
... More
Providing and fixing of the following PVC fittings. (Sample to be approved by EIC)
-
-
-
... More
Plain bend.
-
-
-
... More
100mm
1
300
300
... More
75mm
1
280
280
... More
Collar
-
-
-
... More
100 mm
1
200
200
... More
75 mm
1
180
180
... More
Door Bend
-
-
-
... More
100 mm
1
300
300
... More
75 mm
1
280
280
... More
Door Tee
-
-
-
... More
100 mm
1
300
300
... More
75 mm
1
280
280
... More
Plain Tee
-
-
-
... More
100 mm
1
225
225
... More
75 mm
1
210
210
... More
Door Junction Four Way
-
-
-
... More
100 mm
1
350
350
... More
75 mm
1
300
300
... More
Plain Junction Four Way
-
-
-
... More
100 mm
1
225
225
... More
75 mm
1
200
200
... More
Floor Trap
-
-
-
... More
100 mm
1
250
250
... More
75 mm
1
175
175
... More
Multi Trap 100mm
1
350
350
... More
Providing and fixing of Health Faucet / jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories , installation charges and complete in full respect as per the directions of Engineer- in-charge.
1
1500
1500
... More
Providing and fixing Brass bib cock short body of approved quality 15mm nominal bore.
1
583
583.25
... More
Providing and fixing Brass bib cock long body of approved quality 15mm nominal bore.
1
712
712.6
... More
Providing and fixing spindle 15mm dia. All types like washer type/disc type etc.
1
250
250
... More
Providing and fixing Mixer leg (Sample to be approved by EIC)
1
220
220
... More
Providing & Replacing of Siphon to flushing cistern (Sample to be approved by EIC)
1
550
550
... More
Providing & Replacing of washer to Siphon of flushing cistern
1
150
150
... More
Providing & Replacing of handle to Siphon of flushing cistern
1
100
100
... More
Providing & Replacing of ball cock of flushing cistern without float
1
400
400
... More
Providing & Replacing of ball cock of flushing cistern with float
1
500
500
... More
Providing & fixing of pvc panelling minimum 5mm thick of approved make including all related acessories like corner/top flashing, etc complete including grounds, including fixing,screwing complete
1
1450
1450
... More
Providing & fixing wallpaper of approved pattern & quality to wall surface including chemical & adhesive as per directions of EIC
1
800
800
... More
Providing & fixing curtain rod S.S
1
120
120
... More
Providing & fixing curtain Brackets S.S
1
80
80
... More
Providing & fixing curtain Knob S.S
1
80
80
... More
Providing & fixing Ornamental Brackets
1
120
120
... More
Providing & fixing Ornamental Knobs
1
90
90
... More
Touchwood polishing,two or more coats on wood work including pressing of nails,scrapping with emery paper, a coat of wood filler & fevicol washing complete as per directions of EIC on new wood work.
1
160
160
... More
Touchwood polishing,two or more coats on wood work including a coat of wood filler & fevicol washing complete as per directions of EIC.also including removing of old existing finishing by proper scrapping with sanding/emery paper as per directions of EIC.
1
180
180
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain Polypropylene random fittings, (including necessary PPR reducers) etc. This includes testing of joints complete as per direction of Engineer incharge.Internal work Concealed fixing the pipe etc. (Sample to be approved by the EIC)
-
-
-
... More
Internal work Concealed fixing the pipe ......etc. PN-16 pipe , 25mm OD
1
461
461.9
... More
Internal work Concealed fixing the pipe ......etc. PN-16 pipe , 32mm OD
1
519
519.75
... More
Internal work exposed on wall with clamps ......etc. PN-16 pipe , 25mm OD
1
298
298.1
... More
Internal work exposed on wall with clamps ......etc. PN-16 pipe , 32mm OD
1
377
377.5
... More
Internal work exposed on wall with clamps ......etc. PN-16 pipe , 40mm OD
1
512
512.2
... More
Internal work exposed on wall with clamps ......etc. PN-10 pipe , 50mm OD
1
650
650.7
... More
External work including trenching, refilling etc. PN-16 pipe , 25mm OD
1
236
236.65
... More
External work including trenching, refilling etc. PN-16 pipe , 32mm OD
1
300
300.9
... More
External work including trenching, refilling etc. PN-16 pipe , 40mm OD
1
399
399.45
... More
External work including trenching, refilling etc. PN-10 pipe , 50mm OD
1
543
543.95
... More
External work including trenching, refilling etc. PN-16 pipe , 63mm OD
1
626
626.2
... More
Providing and fixin of PPR Male/ Female Adaptors (All types like elbows, tees etc) (Sample to be approved by EIC)
-
-
-
... More
for 25mm dia.
1
250
250
... More
for 32mm dia.
1
325
325
... More
for 40mm dia.
1
375
375
... More
Providing and fixing PPR Unions (Sample to be approved by EIC)
-
-
-
... More
for 25mm dia.
1
350
350
... More
for 32mm dia.
1
400
400
... More
for 40mm dia.
1
500
500
... More
for 50mm dia.
1
760
760
... More
for 63mm dia.
1
950
950
... More
Providing and fixing PPR ball valves (Sample to be approved by EIC)
-
-
-
... More
for 25mm dia.
1
600
600
... More
for 32mm dia.
1
750
750
... More
for 40mm dia.
1
900
900
... More
for 50mm dia.
1
1050
1050
... More
for 63mm dia.
1
1550
1550
... More
Providing and fixing of thermal insulation over following dia G.I Pipes at all heights
-
-
-
... More
for 15mm dia.
1
50
50
... More
for 20mm dia.
1
60
60
... More
for 25mm dia.
1
80
80
... More
for 40mm dia.
1
100
100
... More
Providing and fixing C.P. two way brass bib cock of approved quality ((Sample to be approved by EIC) 15mm nominal bore
1
1250
1250
... More
Providing and fixing C.P. two way brass 2 way angle valve of approved quality ((Sample to be approved by EIC) 15mm nominal bore
1
1250
1250
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
1
809
809.9
... More
Providing and Laying Red Stone For dedo,flooring,Landings of staircase, etc. using red stone of minimum thickness 18 mm machine-cut slabs of approved quality, type & colour as per the approved sample, including cutting to required sizes, shapes and pattern as per drawing, and laying to the required level / slope including all surface preparation, providing and laying cement mortar (1:4) bed of average thickness 25 mm with cement slurry / pastespread on the top of mortar using grey cement, filling and finishing the joints with neat cement slurry/ white cement with matching colour pigment, curing, mirror polishing of joints if required, cleaning etc. complete at all floors and levels as per the instructions ofthe EIC. The Contractor shall arrange for storage of all related materials at site, handling, shifting and lifting at work location.
1
950
950
... More
Providing & fixing various sizes of 15mm CP Nipples
1
110
110
... More
Supplying and fixing of Suitable rating common electrical starter 1-1.5 H.P
1
4000
4000
... More
Repair of Suitable rating common electrical starter
1
2000
2000
... More
Engagement of Hilti for cutting slab, demolishing of concrete etc
1
2500
2500
... More
Repairs of Aluminium Doors/ Windows partition including cost of necessary beading, fasteners, screws, rubber gaskits complete
1
100
100
... More
Providing & fixing of stainless steel (grade 304) railing made of hollow tubes,channels etc including welding grinding,buffing ,polishing & making curvatures & fitting the same with necessary stainless nuts & bolts complete i.e fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc of required size of the top of the floor or the side of waist slab with suitable arrangements as per approval of engineer in-charge.
1
753
753.75
... More
Newel Post (S.S)
1
4000
4000
... More
Providing and fixing of PVC type 3 piece corner shelf (Sample to be approved by EIC)
1
1500
1500
... More
Scientific cleaning & sterilization of Water Storage tanks
The Job involves 6 stage scientific cleaning and sterilization process consisting of Mechanical Dewatering, Hi-Pressure Cleaning, Sludge Removal, Vacuum Cleaning, Antibacterial Spray and finally killing of suspended & floating bacteria by Ultra violet Radiation as detailed below:-
1. Dewatering of Tanks:- The Water from the Storage tanks should be pumped out of tanks through Mechanical Dewatering pumps of suitable capacity.
2. Exterior Cleaning:- The Roof top, Manholes and External walls of the Water Storage Tanks should be cleaned thoroughly for any traces of dirt, mud and algae present in the close vicinity.
3. High Pressure Interior Cleaning:- The interiors of the water storage tanks should be cleaned with high pressure jet which dislodges the layers of dirt and other suspended foreign bodies which may be sticking on the walls. This process will remove the layer of calcination of dirt if any so as to make the interior free of any germs and bacteria. The interiors including the floor , walls and top ceiling of the over head tanks.
4. Sludge Removal:- The Dirty water and sludge collected in the previoius operation should be removed using industrial Sludge pumped and disposed off properly away to a safer place so as not to contaminate the water. The floor of water storage tanks should be again cleaned thoroughly using high pressure jet stream so as to remove all the remaining dirt which may be sticking on the floor even after removal of the sludge slurry.
5. Drying of tanks:- The water storage tanks should then be dried using industrial Vacuum Cleaners of suitable capacity.
6. Antibacterial Spraying:- The inside walls, ceiling and floor of the water storage tanks should then be given the antibacterial treatment which would ensure all interior walls, ceiling and floor surface of the water storage tanks totally germs free.
7. Sterilization using Ultra Violet Radiation:- Finally, UV Radiator should be used to ensure the complete wipe out of any bacterial traces which may still be present even after the completion of above processes by giving Ultra Violet Treatment on all Interior Surfaces
Over Head Water Storage Tanks/ PVC Water Storage tanks
-
-
-
... More
PVC overhead storage tanks
1
3
3
... More
Underground Sumps
1
2
2
... More
RCC Overhead Storage tanks
1
2
2
... More
Providing and laying mat finished Vitrified anti-skid tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including epoxy grouting of joints Size of tile 600x1200 mm
1
1700
1700
... More
Providing and laying Vitrified tiles in walls with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x1200 mm
1
1700
1700
... More
Provide, fit & fix 2 mm thick Lead sheet protective layer with 6 mm thick ISI quality plywood covering on internal face of doors & windows including frames of X-ray rooms including heavy duty hinges, door closures etc all complete with necessary transportation & labour charges, nails etc . The work to be done as per AERB guidelines
1
1450
1450
... More
Providing and fixing of low height storage cabinate having 450mm. depth made from 18 mm thick plw wood all side finished with 1.0 mm thick Laminate of approved shade on the exterior side as per design of approved colour and the inner surface is finished with paint of approved colour. The work shall be completed with all necessary hardwares i.e, S.S Handles,brass locks,wall catches etc,labour and materials etc.
1
8500
8500
... More
Providing of Wiring for Lighting point/Ceiling fan point/Ex.fan point/Call bell Point with 1.5 sq mm FRLS PVC Insulated multi strand copper Wire of Polycab /Finolex /Paramount / Anchor make dully isi marked in surface / recessed medium class PVC conduit ,. ( Excl Cost of Conduit ) but including cost of circuit wiring of same size from DB Box to first switch in sub circuit complete job . (Seperate circuit for normal and invertor points ) The job includes providing and fixing of 6 Amps one way switch of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.
1
950
950
... More
Providing of Wiring for 16 Amp Power Sockets outlet points in 3x4.0 sq mm ( P+N+E) FRLS PVC Insulated multi strand copper conductor wires of Polycab /Finolex /Paramount / Anchor make to be laid in surface / recessed medium class PVC conduit. ( Excl Cost of Conduit/Channel ) . The job includes providing and fixing of 16 Amps one way switch and 16 Amps one way socket of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.The job includes circuit wires from DB Box to first switch in sub circuit ,max two points shall be paired in one circuit complete job ( No extra circuit wiring will be paid what so ever the length )
1
850
850
... More
Supply. Installation, testing and commissioning of 250 mm sq Shutter Type Exhaust fans of of CG /USHA / Standard /Helonix make
1
1600
1600
... More
Providing ,Installation ,Testing and Commissioning of 12 WAtt LED Surface mounted lighting fixtures (round / Square) having aluminium body (CRCA) of Philips /Havells /Trulux /Helonix /Jaguar /Wipro make dully isi marked ,incl 2-pair connection wires complete job. The job includes replacement warrenty of fixture for a period of two years reckoned from date of sucessful commissioning
1
350
350
... More
Providing ,laying in position 20/25mm pvc condiut for surface incl cost of necessary clips complete job.
1
55
55
... More
Supply Laying and connecting of 4sq mm PVC insulated multi strand copper wire of reputed make dully ISI laid through conduit/channel Excl.cost of conduit/channel.
1
55
55
... More
Supply Laying and connecting of 4sq mm PVC insulated multi strand copper wire of reputed make dully ISI laid through conduit/channel Excl.cost of conduit/channel.
1
75
75
... More
Supply Laying and connecting of 2.5sq mm PVC insulated multi strand copper wire of reputed make dully ISI laid through conduit/channel Excl.cost of conduit/channel.
1
30
30
... More
P/F of 15 Amp Box type Switch socket combine with top ISI make for input and output inverter supply.
1
300
300
... More
S/I/T& Commissioning of 1200mm sweep heavy duty ceiling fan of ISI make complete with connection to be got approved before installation and fixed at Sub Division room
1
1800
1800
... More
Supplying and fixing of 63 Amps rating DP 240/415 volts (10KA ) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
1
1750
1750
... More
Supplying and fixing of 32 -40 Amps rating DP 240/415 volts 910KA) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections.
1
1500
1500
... More
Wiring for circuit/Sub main Wiring along with earth wire in FRLS PVC insulated 660/1100 volt grade flesible stanmdard copper conductor wire of standard make (to be got approved before installation) in recessed or surface conduting system excluding cost of conduit of following size.
-
-
-
... More
2x2.5 Sq.mm +1x2.5 Sq mm circuit wire
1
95
95
... More
2x4 Sq.mm +1x4 Sq mm circuit wire
1
140
140
... More
2x6 Sq.mm +1x 6Sq mm earth wire
1
150
150
... More
4x6 Sq.mm +1x 6Sq mm for X-ray points
1
280
280
... More
Supply, Laying and connectinhg of 16Sq. Mm PVC insulated Multi Stand Copper wire of rep;uted make dully ISI make laid through conduit executing cost of conduit.
1
110
110
... More
Providing/Installation of 1 HP Submersible dewatering pump including commissioning of the same with necessary fittings/fixtures with automatic sensor complete.
1
18000
18000
... More
Providing/Installation of 2 HP Submersible dewatering pump including commissioning of the same with necessary fittings/fixtures with Automatic sensor complete.
1
25000
25000
... More
Removing / Dismantling / Re-Installing after repairs to 2 HP Submersible dewatering pump, including replacing / rewinding of coils if required and change of water level sensors.
1
4200
4200
... More
Note. Any other item not covered in the BOQ, if required to be executed at site, shall be paid strictly as per the rate mentioned in JKSOR-2022/LMR after deducting the contractors depreciation
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements