Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Dec 2024
Closing Date23 Dec 2024
Tender Amount₹ 2,02,78,000
Costs
EMD
₹ 4,05,560Document Cost
₹ 6,000Tender Fee
Refer Documents
Summary
Construction Of Sports Block At Gdc Nowshera
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_267438_1Bid Award Id
ViewTender No
e-NIT No. 10 of 2024-25 Dated 09.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:.All kinds of soil :1 meter from cutting edge
66.81
479
32022.03
... More
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
700
91
64225
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed. (JKSOR-4.47).
71.27
5202
370810.68
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All work upto plinth level. (JKSOR-5.34).
130.87
8021
1049721.36
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M. (JKSOR-2.11).
978.71
218
213750.26
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (JKSOR- 2.23).
93.24
1204
112307.58
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All work above plinth level upto floor V level. (JKSOR- 5.34.2).
84.88
9412
798894.8
... More
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. (Thermo-Mechanically Treated bars of grade Fe-500D or more.) (JKSOR- 5.22).
42719.79
123
5263078.13
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :- (JKSOR- 5.9).
-
-
-
... More
Foundations, footings, bases of columns.
414.6
286
118720.71
... More
Columns, pillars, piers.
211.34
742
156930.52
... More
Lintels, beams, plinth beams.
404.55
577
233647.85
... More
Suspended floors, roofs, landings and access platforms.
235.82
718
169365.92
... More
Edges of slabs and breaks in floors and walls upto 20cm wide.
135.21
262
35452.06
... More
Wall (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc
253.44
628
159401.09
... More
Stairs (excluding landings) except spiral stair cases.
9.48
851
8068.9
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (JKSOR- 4.4).
104.81
5733
600938.62
... More
Providing and laying DPC 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and curing complete.
78.89
416
32857.69
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 fine sand).(Below Plinth upto Plinth level) (JKSOR- 6.1).
15.89
7877
125171.89
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:6 (1 cement : 6 fine sand). (JKSOR- 6.1.4).
173.28
7571
1311998.18
... More
Extra for brick work in super structure above plinth level upto floor V-level. (JKSOR- 6.4).
173.28
1455
252235.03
... More
Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand). (JKSOR- 6.15.2).
52.54
947
49768.52
... More
Extra for half brick work in super structure above plinth level upto floor V-level. (JKSOR- 6.16).
52.54
159
8388.01
... More
Extra for providing and placing in position 2 Nos 6mm dia M.S Bars at every third course of half brick masonary . (JKSOR- 6.18).
52.54
126
6648.94
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) (JKSOR- 13.17).
235.82
241
56891.58
... More
12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).(JKSOR- 13.1).
744.65
266
198225.83
... More
15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand). (JKSOR- 13.2).
1096.05
306
336322.94
... More
Making of grove 12mm x 10mm between brick and RCC. (LMR).
277.44
10
2774.4
... More
Add or deduct for plaster drip coarse / groove in plastered surface of moulding to RCC projections. (JKSOR- 5.30).
277.55
62
17208.1
... More
Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed. (JKSOR- 4.24).
103.4
572
59227.52
... More
Brick edging 7 cm wide 11.4cm deep to plinth protection with bricks of class designation 75mm including grouting with cement mortar 1:4 (1 cement : 4 fine sand).(JKSOR- 6.48).
136.06
66
9013.98
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm. (JKSOR- 23.7.1).
113.01
1404
158739.5
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (JKSOR- 12.30).
6
262
1577.4
... More
Providing and fixing of Vinyl flooring of 4.50mm thick fix with Required solution (SPT-081, Capri Blue) with Features like Glass Fibre Tissue (GFT) reinforced for Dimensional stability and Strength,PUR Surface Protection etc , Approved as per the Direction of Consultant (COMPLETE JOB) . MAKE :- BRAAVO SPORTS , WONDER FLOOR
223.08
1500
334620
... More
Providing and laying FULL TYPE vitrified floor tiles 600x600 mm (in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete job (JKSOR- 11.52.2).
101.46
1395
141546.85
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (JKSOR- 11.68).
22.38
2336
52289.75
... More
Providing and laying 18mm thick Granite of any colour and shape (area of slab over 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. (JKSOR- 8.2.2.2).
2.23
2994
6677.96
... More
Extra for providing edge moulding to 18 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (JKSOR- 8.3.2).
46.35
381
17691.8
... More
Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. (JKSOR- 8.5).
4
778
3114
... More
Providing and fixing ceramic glazed floor tiles (non-skidding) 300x300mm (thickness to be specified by the manufactures) of Premium quality conforming to IS : 13755 of ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, Ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. (JKSOR- 11.50.1).
44.95
1107
49788.87
... More
Providing and fixing Ist quality ceramic glazed wall tiles 300X600mm conforming to IS : 13753 of minimum thickness 5mm of approved make like SOMANY, KAJARIA or equivalent make in all colour, shades except burgundy, bottle green, black of any size as approved by Engineer in charge over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (JKSOR- 8.31).
144.87
1229
178059.72
... More
Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (glazing and panelling to be paid for separately).(JKSOR- 22.1).
-
-
-
... More
For fixed portion using Powder coated aluminium (minimum thickness of powder coated 50 microns). (JKSOR-22.1.1.2).
776.1
514
399148.23
... More
For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coated 50 microns).(JKSOR- 22.1.2.1).
514.13
607
312282.56
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). With glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm). (JKSOR- 22.3).
20.82
1201
25021.48
... More
Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade-I, Type-II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand andmanufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless screws etc. compete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. (JKSOR- 22.2.2).
50.15
933
46807.5
... More
Providing and fixing fly proof stainless steel grade 304 wire gauze with 0.5mm dia wire and 1.4mm wide aperture in aluminium door, window, ventilator shutters and partition etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). (JKSOR- 10.29.2).
22.03
1014
22357.15
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge with brass cover plate. (JKSOR- 22.4).
20
2568
51361
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. (JKSOR- 22.8).
200
97
19430
... More
Providing and fixing aluminium tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. (JKSOR- 9.99).
-
-
-
... More
100x10mm.
24
63
1520.4
... More
150x10mm.
112
83
9385.6
... More
200x10mm.
34
95
3241.9
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. (JKSOR- 9.102).
-
-
-
... More
125MM
17
68
1156
... More
100mm.
68
60
4080
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. (JKSOR-9.105).
16
747
11953.6
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper. (JKSOR- 9.103).
16
63
1015.2
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter. (JKSOR- 12.58).
18.29
366
6699.63
... More
Providing and fixing on wall face unplasticised-PVC moulded fitting / accessories for unplasticised- rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion :-(JKSOR- 12.59).
-
-
-
... More
Coupler 110mm.
5
179
895
... More
Single tee with door 110 x 110 x 110mm.
5
289
1449.5
... More
Bend 87.5* 110mm.
5
183
915.25
... More
P/F stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc, including welded, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc. (HILTI :- NUTS & BOLTS (HST-4)). (JKSOR- 10.28).
91.46
753
68937.98
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture,over the plasterted wall surface to prepare the surface even and smooth complete. (JKSOR- 13.88).
1306.49
138
180426.27
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. (JKSOR- 13.52).
1306.49
66
87338.86
... More
Finishing wall with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm) (JKSOR- 13.55).
497.1
185
92062.92
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm (JKSOR- 13.54).
128.05
268
34375.02
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. (JKSOR- 13.69).
681.35
136
93174.61
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
420.73
98
41547.09
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes (JKSOR- 10.16).
11480.64
156
1801886.45
... More
Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work (STEEL WORK). (JKSOR- 13.17).
277.02
131
36525.09
... More
Providing and Fixinig Colour Coated G.I. Sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/sqm.(JKSOR- 12.1).
285.54
974
278130.24
... More
Extra for providing and fixing wind ties of 40x6mm flat iron section. (JKSOR- 12.19).
67.73
232
15767.54
... More
Providing and fixing 2nd class Deodar wood plained eaves boarding.250x32 mm (nominal size) (JKSOR- 12.69).
67.73
999
67665.66
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2 (JKSOR- 12.4).
67.73
761
51606.87
... More
Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.1.00 mm thick with zinc coating not less than 275 gram/m2 (JKSOR- 12.5).
67.73
1071
72562.54
... More
Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gram/m2 (JKSOR- 12.7).
67.73
795
53885.99
... More
Providing flat iron brackets 50 x 3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/ G.S. sheets gutters with purlins. (JKSOR- 12.14).
67.73
96
6539.33
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.)with grass turf
7
1354
9480.8
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
210
281
59073
... More
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment)Screened through sieve of I.S. designation 4.75 mm.
210
134
28329
... More
Fine dressing of the ground
7
374
2620.8
... More
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
210
37
7770
... More
Provision for trees at height of 6ft of Green Bottle Palm Tree,
15
1500
22500
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
9
8563
77071.5
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
43.88
816
35838.99
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
279.13
1303
363957.61
... More
Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.
-
-
-
... More
Sand for an average lead of 15 Kms.
106.07
1072
113796.14
... More
Stone aggregate below 40mm size for an average lead of 15 Kms.
259.35
408
106058.59
... More
Stone aggregate 40mm and above 40mm size for an average lead of 15 Kms.
66.28
445
29537.02
... More
Bricks for an average lead of 25 Kms
92850.43
2
265552.23
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.20).
5
5632
28162
... More
Providing and fixing wash basin with C.I. brackets,15mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.7).
4
4172
16689.6
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.(MAKE:- Prayag, Kerovit, Essel,Euronics) (JKSOR- 19.44).
4
2072
8288.4
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(MAKE:- Prayag, Kerovit, Essel,Euronics) (JKSOR- 18.22).
4
869
3478.6
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.(MAKE:- Prayag, Kerovit, Essel,Euronics) (JKSOR- 18.23).
2
1400
2800.1
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms (MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.75).
2
196
393.1
... More
Providing and fixing PTMT urinal cock of approved quality and colour : 18.76.1 15 mm nominal bore, 80 mm long, 42mm high and 30 mm wide with BSP female threads weighing not less than 48 gms (MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.76).
2
180
361.6
... More
Providing and fixing16mm/18mm stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. White Agaria Marble Stone (JKSOR- 8.10).
1
3698
3698.4
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.or wherever required as per the direction of Engineer Incharge.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.22).
4
129
516.4
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer - in - charge. (MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.17A).
4
412
1648.4
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 19.43A).
100
69
6985
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points or wherever required as per the direction of Engineer Incharge of approved make conforming to IS : 8931.((MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 19.42).
40
582
23294
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms.((MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.69).
4
188
753
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.72).
2
248
496.9
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. (MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.73).
2
803
1607
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.71).
2
287
575
... More
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 19.56).
2
230
460
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (JKSOR- 18.31).
2
1595
3190.2
... More
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete (MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 18.33).
2
902
1805
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(MAKE:- Jaguar,Kerovit, Essel,Euronics) (JKSOR- 19.40).
4
712
2850.4
... More
Providing and fixing Plane floor trap with heavy class SS grating and setting in floor with cement mortar to match the floor finish as per direction of Engineer-in-charge (size 100 X 75mm mm dia) ISI marked.(MAKE:- Jaguar,Kerovit, Essel,Euronics) .
30
1400
42000
... More
Providing and fixing toilet paper holder C.P. brass. (MAKE:- Prayag, Kerovit, Essel,Euronics) (JKSOR- 18.34).
4
1011
4047
... More
SUB HEAD - II : WATER SUPPLY.
-
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe40mm dia
4
150
603.2
... More
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:( Make : Kitec, Vista, Prayag,Supreme,)
-
-
-
... More
1216 (16mm OD) pipe.
60
492
29541
... More
1620 (20mm OD) pipe.
60
515
30942
... More
2025 (25mm OD) pipe.
70
632
44299.5
... More
1216 (16mm OD) pipe.
25
257
6431.25
... More
1620 (20mm OD) pipe.
30
274
8239.5
... More
2025 (25mm OP) pipe.
30
361
10849.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. Including with all Necessary fittings & Acessories Complete job. Make ( Make : Kitec, Vista,Gebrat Prayag,Supreme,)
-
-
-
... More
25 mm dia. nominal bore (Medium)
50
529
26485
... More
32 mm dia. nominal bore (Medium)
50
634
31732.5
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete copatable to connection with composite pipe (make :Rehau / Kitech/gebbrat/Prayag )
-
-
-
... More
15 mm nominal bore
5
453
2267.5
... More
20 mm nominal bore
5
524
2624.25
... More
25 mm nominal bore
5
569
2847.25
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
25 mm dia. nominal bore (Medium)
50
26
1322.5
... More
32 mm dia. nominal bore (Medium)
50
31
1575
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
-
-
-
... More
25 to 40 mm nominal bore
15
730
10953.75
... More
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.
-
-
-
... More
15 mm dia
5
525
2625
... More
20 mm dia
5
573
2865
... More
Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed.
20.56
479
9854.41
... More
Providing and fixing on wall face unplasticised-Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. (.MAKE Supreme, asirwad, prince,jain )with. All necessary fittings and Accessories as per the Direction of Engineer Incharge.
-
-
-
... More
75MM dia
50
226
11307.5
... More
110MM dia
80
366
29304
... More
150MM dia
100
516
51630
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line-
10
6341
63414.5
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard designInside dimensions 600x850 mm and 45 cm deep for single pipe line with three or more inlets.
10
8703
87031.5
... More
Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge. (Size 100 mm dia) (ISI Marked)
5
695
3475
... More
Providing and fixing 100 mm sand cast iron grating for gully trap.
15
60
911.25
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.). MAKE (PRAYAG)
20000
8
175000
... More
Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.
2
20694
41389.6
... More
Supply, assembly, erection, testing and commissioning of pumping system comprising the following:Vertical/Horizontal centrifugal pumps (1 Working + 1 Stand-by) with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100/ 50 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) (wilo,ebara and matherplatt etc.)
-
-
-
... More
Pump Capacity 180 lpm, at 30 m head (1 working + 1 standby) (Domestic water relift pump).
1
19406
19406
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
115
1467
168705
... More
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.(S/R)
350
334
116900
... More
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.
-
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
500
275
137500
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
50
439
21950
... More
4 X 10.0 sq. mm + 2 X 6.0 sq. mm earth wire
80
1005
80400
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (S/R)
3
477
1431
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (S/R)
2
676
1352
... More
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
75
40
3000
... More
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.
17
586
9962
... More
Supplying and fixing of 32 A 240 Volts Modular MCB in Modular Box, on surface or in recess, complete with connections, testing and commissioning etc. as required.(For 2.0 Tr A.C) (S/R)
1
990
990
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (S/R)
7
369
2583
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24), Double door (S/R)
2
5967
11934
... More
Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single Pole (S/R)
30
256
7680
... More
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required.
-
-
-
... More
25 A D.P MCB 10 Ka "C" Curve (LMR)
1
591
591.5
... More
32 A D.P MCB 10 Ka "C" Curve (LMR)
1
591
591.5
... More
40 A D.P MCB 10 Ka "C" Curve (LMR)
6
955
5733
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A F.P MCB 10 Ka "C" Curve (LMR)
2
2136
4272.32
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.(S/R)
10
13
130
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
12 way , Double door (S/R)
1
2315
2315
... More
Supplying,Installation,Testing and Commissioning of G.I Earthing Electrode of Size 50 x 3000mm with GI Pipe Outer Dia. 58 mm (+-) 5 %,Length 3000 mm,Inner & Outer GI Strip Size 32X6mm,Terminal Hole Two Nos.,Terminal Hole Dia. 14 mm,Seal Plate Thickness 4 mm,Base Plate Thickness 4 mm,Inner filling Material – Highly Conductive Super Crystalline Mixture,Outer filling material - Highly Hygroscopic, Non corrosive Back Fill Compound 50 Kgs. (LMR)
2
10735
21470.96
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
60
706
42360
... More
Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.
14
768
10754.8
... More
Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .(LMR)
22
1323
29106
... More
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required. (LMR)
7
2250
15750
... More
Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of ABS Plastic Material with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .
-
-
-
... More
300 mm
8
1541
12333.6
... More
Supply,Installation,Testing and Commissioning ofSingle Phase 600 mm ,1440 RPM Metal Body Wall Fan (LMR)
17
15166
257825.4
... More
Supply installation testing and commissioning of IP65 led Street Light With Toughened Glass and Secondary Lens 90 W +/- 5 W complete with M.S/G.I Pipe(Duly Bracket embedded along with Parapet/Wall including complete connections as required .The P.F.0.95 ,THD10% ,CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab . (LMR)
7
10136
70952.42
... More
Supply & Fixing of 36W , 2x2 LED reccesse type Luminaire suitable for operating Voltage range of 150V-270V with inbuilt surge protection of 2KV and Color temprature 5700K ANSI BIN . Minimum system lumens 4320 and system efficacy 120 Lm/watt (Supported by in house NABL approved report of LM79 provided by OEM and duly signed by company manager not below rank of RM) . Luminaire should be suitable for armstrong /grid ceiling mounting with help of 4 Nos clips for suspension. Body made up of CRCA powder coated with Diffused Optics. Luminaire size should not be less than 595x595x60mm and power factor =0.95, CRI=80, THD10%, Max system wattage should be 36 Watt, IP-20 ingress protection. NABL certification and BIS (both luminaire and driver) requried to be provided at the time of sample approval. (LMR)
40
2185
87404
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved. (LMR) Adj. TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos) Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 200 Amps ) , MCB Strip,Indicating Lamps,Multifunction Meter,Ammeter,Voltmeter etc. of suitable size as Required.
OUTGOINGS
Manual Changeover 100 A F.P 415 Volts AC-23 Duty25 A D.P MCB 10 Ka "C" Curve(02Nos)
40 A F.P MCB 10 Ka "C" Curve(04 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
120000
120000
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
100
247
24700
... More
Supplying and Laying of 1 No. PVC/XLPE insulated and PVC Sheathed /XLPE Power Cable of 1.1 KV Grade of Following Sizes in the existing RCC/Hume/DWC/Stone ware/Metal Pipe as Required.
-
-
-
... More
3.5 C X 35 Sq.mm Aluminium Armoured
100
702
70220
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
-
-
-
... More
3½ X 35 sq. mm (32mm)
2
369
738
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm) (S/R)
3
298
894
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
1
148
148
... More
Computer Socket RJ45 Modular type
1
443
443
... More
Television socket outlet (S/R)
1
148
148
... More
Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm PVC Conduit (S/R)
120
128
15360
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair (S/R)
40
38
1520
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
40
57
2280
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (S/R)
40
47
1880
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC (LMR)
1
1447
1447.59
... More
Supply & Erection of lockable 12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC. (LMR)
1
4125
4125.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements