Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Aug 2024
Closing Date23 Aug 2024
Tender Amount₹ 2,09,22,000
Costs
EMD
₹ 4,18,440Document Cost
₹ 600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_257042_1Bid Award Id
ViewTender No
e-NIT No. 61 of 2024-25 dated 13.08.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed for lead up to 25 meter from cutting edge in All kinds of soil.
492.34
258183
524.4
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
110.47
488260
4419.85
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20 % plums.
486
1981908
4078
Providing and laying cement concrete in Protection walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% Boulders.
74.01
400390
5409.95
Dry random rubble masonry with hard stone in foundation and plinth With bond stone.(Nallah stone).
133.71
315014
2355.95
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.
124.02
46240
372.85
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
50.87
360749
7091.6
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
10.26
87752
8552.85
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
6.48
58021
8953.95
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
39.74
285812
7192.05
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level
103.37
874225
8457.25
Reinforcement for RCC works including straightening, cutting, bending, placing in position and binding all complete all work up to plinth level and above plinth level , Thermo-Mechanically Treated bars of grade Fe-500 D or more.
28556.12
2263072
79.25
Centering and shuttering including strutting, propping, etc and removal of form work for foundations , footings ,bases of columns etc.
1998.65
524245
262.3
Centering and shuttering including strutting, propping, etc and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
477.74
274151
573.85
Centering and shuttering including strutting, propping, etc and removal of form work for columns ,pillars ,piers etc.
234.09
159216
680.15
Centering and shuttering including strutting, propping, etc and removal of form for suspended floors,roofs,landings,balconies and access platforms, stairs and spiral stairs cases.
259.9
165192
635.6
Centering and shuttering including strutting, propping, etc and removal of form for Weather shades, chajjas, corbels etc. including edges
34.5
33777
979.05
Centering and shuttering including strutting, propping, etc and removal of form for Stairs (excluding landings) except spiral staircases.
10.98
8866
807.5
Centering and shuttering including strutting, propping, etc and removal of form for lintels, beams , girders , bressumers and cantilevers all complete.
459.92
231270
502.85
Centering and shuttering including strutting, propping, etc and removal of form for edges of slabs. (under 20 cm).
111.3
26967
242.3
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : in Cement mortar 1:4 ( 1 cement : 4 coarse sand).
18.95
123197
6501.2
Brick work with common burnt clay (Non-Modular) bricks of class designation 7.5 in foundation and plinth including curing complete in Cement mortar 1:6 ( 1 cement : 6 coarse sand).
262.18
1621255
6183.75
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
262.18
347034
1323.65
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement: 3 coarse sand).
59.94
47088
785.6
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
59.94
8703
145.2
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand),
751.26
181617
241.75
15mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 ( 1 cement : 6 fine sand )
1940.22
540545
278.6
6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)
224.87
49808
221.5
15mm Cement plaster finished with a floating coat of neat cement of mix 1 : 3 ( 1 cement : 3 fine sand) (septic tank/sump tank).
76.72
29748
387.75
12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand),
88.56
21409
241.75
Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections
60
3381
56.35
Making of Groove 12mmx10mm between brick and RCC
260
3120
12
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) including curing complete, but excluding the cost of nosing of steps etc.complete, 25mm thick with 12.5 mm nominal size stone aggregate.
204.28
65941
322.8
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 60x60cm.
191.2
283358
1482
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,
in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
31.19
47778
1531.85
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown.
13.2
13896
1052.75
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size 300x450mm as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
260.14
302035
1161.05
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18 mm thick
64.68
233536
3610.65
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm thick
10.8
41437
3836.85
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
57.35
24792
432.3
Providing and fixing antiskid floor tiles for ramp 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.
2.78
3336
1200
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood.
2.29
320788
140082.45
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).Including all cost of material and carriages complete.
124
20218
163.05
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm thick)
30.82
98249
3187.85
Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class Deodar wood.
42.76
193890
4534.4
Providing and fixing wire gauze shutters 35 mm thick using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood.
54.42
237706
4368
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.Including all cost of material and carriages complete.
454.46
81757
179.9
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
3630.11
483893
133.3
Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
300 x 16 mm
4
867
216.75
250 x 16 mm
14
2808
200.6
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250x10 mm
30
3069
102.3
100x10 mm
320
18352
57.35
Providing and fixing Aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) tranparent or dyed to required colour or shade with nuts and screws etc. complete twin rubber stopper.
30
1878
62.6
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
125mm
60
3981
66.35
100mm
160
8368
52.3
Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm
160
12584
78.65
Providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
536.71
349103
650.45
Supply and installation of satin finish stainless steel AISI 304 stainless steel Posts having 100mm dia tube, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at corners complete, as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.
8
24000
3000
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.
473.98
59531
125.6
Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete inclulding cost of material and carriage complete.
1186.7
204587
172.4
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter
1186.7
67523
56.9
Distemper with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats ) over and including priming coat with cement primer including all carriages and cost of materials involved.
715.99
106718
149.05
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
470.71
78020
165.75
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1575
144585
91.8
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
217.23
12925
59.5
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
217.23
26491
121.95
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.
-
-
-
Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing
-
-
-
15mm nominal outer dia pipes.
60.98
14278
234.15
20mm nominal outer dia pipes.
60.98
17693
290.15
25mm nominal outer dia pipes.
7.62
2701
354.5
Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
15mm nominal outer dia pipes
60.98
23693
388.55
20mm nominal outer dia pipes.
18.29
8133
444.7
External work including trenching, refilling etc.
-
-
-
20mm nominal outer dia pipes
30.49
7095
232.7
25mm nominal outer dia pipes
54.88
16848
307
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter..
23.78
8437
354.8
Providing & fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expension (Make Supreme) Coupler 110mm.
16
2712
169.5
Providing & fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expension (Make Supreme) Single tee with door 110x110x110 mm.
16
4572
285.75
Providing & fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expension (Make Supreme) Bend 87.5° 110 mm.
32
5723
178.85
Providing & fixing PVC pipes 6 kg/ cm2 pressure excluding PVC fittings, jointing with adhesive/ seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion of approved make Supreme/ Finolex/ Astral or equivalent.
-
-
-
110mm
300
45000
150
80mm
150
19500
130
Providing and laying PVC accessories and fitting of approved make Supreme/ Finolex/ Astral or equivalent.
-
-
-
110mm dia Door Tee
4
1000
250
110mm dia Plain Bend
4
1000
250
110mm dia Collar.
4
1000
250
110mm dia P-Trap
2
500
250
110mm Door Bend
1
275
275
110mm dia Plain Tee
4
1100
275
110mm PVC Prince Cliff
1
85
85
110mm x 80mm dia Reducer
1
275
275
110mm 45 deg Bend
4
1100
275
80mm 45 deg Bend
2
500
250
80mm dia Door Bend
2
440
220
80mm dia Door Tee
2
500
250
80mm dia Plain Bend
2
440
220
80mm dia Collar.
1
200
200
80mm dia Floor Trap.
4
920
230
80mm dia Plain Tee
2
500
250
80mm PVC Prince Cliff
2
110
55
80mm dia PVC Cowel Caps
2
440
220
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
1
5326
5326.1
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
2
11069
5534.85
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
8
5090
636.3
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
3
1309
436.5
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.Flat back wash basin of size 630x450 mm.
2
2791
1395.7
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
2
2898
1449.35
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg
2
4415
2207.6
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm
1
4575
4575.2
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
21
11258
536.1
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.
4
911
227.9
Providing and fixing un-plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length.
12
1407
117.3
Providing and fixing CP Neeple.
60
3600
60
Providing and fixing C.P Cup.
60
3000
50
Providing and fixing CP Grating.
8
1600
200
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
-
-
-
Rectangular shape 453x357 mm
2
2205
1102.6
Providing and fixing toilet paper holder C.P. brass
2
2513
1256.55
Providing and fixing of CP Health Faucet 900 mm long complete of standard make.(jaguar,Hindware ,perryware or equivalent ).
2
4400
2200
Providing and fixing soil, waste and vent pipes : 100 mm dia, Sand cast iron S and S pipe as per IS:1729
6
5585
930.85
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
22500
11.25
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms.
3
546
182
Providing and fixing PTMT Waste Pipe for wash basin and sink, of approved quality and colour: Flexible pipe 32 mm dia
3
325
108.4
Providing and fixing Ball Valve (brass) of approved quality,high or low pressure with plastic floats complete. 25 mm
4
2104
526.05
Providing and fixing Ball Valve (brass) of approved quality,high or low pressure with plastic floats complete. 20 mm
4
1932
483.1
Providing and fixing TANK NIPPLE
4
900
225
Providing and installation of electric water motor of Crumtum make having 01 H.P including all fitting complete.
1
10000
10000
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
20694
20694.8
Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
1
2401
2401.4
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete incl cost of material and carriage complete.
45
22349
496.65
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
423.16
84081
198.7
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40 mm thick with 20mm nominal size stone aggregate. complete (drain flooring)
144
66506
461.85
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
13894
2315.7
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) , inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and 45 cm deep for single pipe line.
4
22221
5555.4
Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
30.61
2208
72.15
Supplying and stacking of good earth at site including royalty (earth measured in stackswill be reduced by 20% for payment)
30.61
7905
258.25
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 16 mm.
30.61
2932
95.8
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
30.61
1030
33.65
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)
30.61
514
16.8
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
100.37
453
4.52
Fine dressing of the ground
100.37
342
3.41
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.)In rows 5 cm apart in either direction
100.37
1642
16.36
Beautification of area by plantation of trees
30
9000
300
Beautification of different type of flowers.
54
6480
120
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
8.5
49958
5877.45
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
44.86
180747
4029.15
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
446.1
343764
770.6
Carriage of material by mechanical transportation.
-
-
-
Sand average lead 130 Km
464.02
282597
609.02
Stone aggrigate 40mm and above Av. Lead 20.0 Km By M.T.
138.27
52578
380.26
Stone agrigate below 40mm. average Lead 20.0 Km By mechenical means.
564.06
197319
349.82
Bricks, average Lead 50 Km By mechenical means.
129084
209116
1.62
Stone Average Lead 10 Km
232.56
66819
287.32
Building Rubbish/ Earth and other material from site to outside for an avg lead of 5 Kms
4828.88
866156
179.37
Sub Head-I(Wiring)
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
-
-
-
Group C
53
77751
1467
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.
480
160320
334
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
350
96250
275
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
22
22110
1005
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
75
32925
439
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
22
30030
1365
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
35
1400
40
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.
25
14650
586
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 A modular socket
12
7032
586
Supplying & fixing suitable size GI box wih modular plate and
cover in front on surface or in recess including providing and
fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"
curve including connections, painting etc. as required.
2
1454
727
Supplying and fixing DP sheet steel enclosure on surface/ recess
along with 25/32 A 240 V "C" curve DP MCB complete with
connections, testing and commissioning etc. as required.
2
2338
1169
Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
40
10240
256
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
-
-
-
8 way (4 + 24), Double door
1
5967
5967
6 way (4 + 18), Double door
1
4974
4974
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
-
-
-
40 A F.P MCB 10 Ka "C" Curve
1
1722
1722.72
63 A F.P MCB 10 Ka "C" Curve
1
1722
1722.72
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required.
-
-
-
12 way , Double door
2
4630
2315
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required.
-
-
-
40 A D.P MCB 10 Ka "C" Curve
3
2709
903.3
16 A D.P MCB 10 Ka "C" Curve
2
1547
773.92
63 A D.P MCB 10 Ka "C" Curve
3
2709
903.3
Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required.
16
208
13
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with
cover plate having locking arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
2
14944
7472
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre
below ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of G.I. nut
bolt & spring washer spaced at 50mm)
10
1440
144
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.
pipe from earth electrode including connection with G.I. nut,
bolt, spring, washer excavation and re-filling etc. as required.
40
28240
706
Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.
27
20741
768.21
Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
10
14226
1422.61
Supply installation testing and commissioning of IP65 led Street Light 90 W +/- 5 W complete with M.S/G.I Pipe(Duly Bracket embedded along with Parapet/Wall including complete connections as required .The P.F.0.95 ,THD10% ,CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
4
38633
9658.43
Supply,Installation,Testing and Commissioning 486 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of Metal Body with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .
2
6219
3109.81
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.
10
22064
2206.46
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( Main L.T Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD
25
55000
2200
INCOMER
-
-
-
MCCB 100 A F.P 36 Ka with Adj.T.M.R With Icu=Ics=100%
2
21203
10601.97
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required.
1
7500
7500
OUTGOINGS
-
-
-
Manual Changeover 100 A F.P 415 Volts AC-23 Duty
1
5218
5218.83
D.P M.C.B 32 A 10 Ka with "C" Curve
1
773
773.92
MCCB 63 A F.P 36 Ka with Adj.T.M.R With Icu=Ics=100% (Size of wiring for CTS:- 2.5 sqmm Size of wiring for voltage sensing Metering :-4.0 Sq.mm Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc. Gland Plates to be 3.0 mm Thick.)
3
31805
10601.97
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( Building Distribution Panel ) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD
20
44000
2200
INCOMER
-
-
-
MCCB 63 A F.P 36 Ka with Adj.T.M.R With Icu=Ics=100%
1
10601
10601.97
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(100 Amps ) and MCB Strip of suitable size as Required.
1
5000
5000
OUTGOINGS
-
-
-
F.P M.C.B 63 A 10 Ka with "C" Curve
1
1722
1722.72
F.P M.C.B 40 A 10 Ka with "C" Curve
3
5168
1722.72
D.P M.C.B 16 A 10 Ka with "C" Curve (Size of wiring for CTS:- 2.5 sqmm Size of wiring for voltage sensing Metering :-4.0 Sq.mm Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc. Gland Plates to be 3.0 mm Thick.)
4
3095
773.92
Providing and fixing of lightning conductor finial, made of 25
mm dia 300 mm long, G.I. tube, having single prong at top, with
85 mm dia 6 mm thick G.I. base plate including holes etc.
complete as required.
2
1036
518
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For horizontal run)
60
7560
126
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For vertical run)
40
7880
197
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
3.5 C X 50 Sq.mm A2XFY
50
27271
545.43
3.5 C X 25 Sq.mm A2XFY
100
34228
342.28
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
-
-
-
3½ X 50 sq. mm (35mm)
2
826
413
3½ X 25 sq. mm (28mm)
6
1878
313
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required.
-
-
-
120 mm dia (OD-63 mm & ID-51 mm nominal)
50
18400
368
63 mm dia (OD-63 mm & ID-51 mm nominal)
100
24700
247
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
4
1192
298
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
Telephone socket outlet
4
592
148
Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm PVC Conduit
80
10240
128
PIPES & ACCESSORIES
-
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
25 mm dia
6
4464
744
80 mm dia
6
11310
1885
100 mm dia
30
76650
2555
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
Single headed Gunmetal
2
15292
7646
Supplying and fixing orifice plate made out of 6 mm thick Stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
2
2642
1321
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
Gun Metal
4
20808
5202
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic
(Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
30m
1
8675
8675
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
2way - 100 mm dia M.S. Pipe
1
6742
6742
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade
as required.
1
18244
18244
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
43750
8.75
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
Gun metal
2
4832
2416
Providing and fixing Weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 mx 0.25 m).
2
9829
4914.6
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
2
2527
1263.75
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation,
conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling
guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered
and with anti vibration pads.
-
-
-
450 lpm at 35 m Head
1
86203
86203
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55) (Terrace Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD
6
13200
2200
INCOMER
-
-
-
MCCB 63 A F.P 25 Ka with Adj. Thermal & Adj. magnetic release with Extendable ROH Icu=Ics=100%
1
8634
8634
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(80 Amps ) and MCB Strip of suitable size as Required.
1
4000
4000
OUTGOINGS
-
-
-
MPCB 19-25 A With STD. Magnetic Release
1
4936
4936
Power Contactor 40 A415 Volts, AC-3 Duty
1
3685
3685
Start/Stop Push Button (Size of wiring for CTS:- 2.5 sqmm Size of wiring for voltage sensing Metering :-4.0 Sq.mm Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc Gland Plates to be 3.0 mm Thick.)
1
700
700
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
100 mm dia
2
13334
6667
80 mm dia
2
9964
4982
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
100mm dia
2
22100
11050
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia
holes with stainless steel flange.
-
-
-
100mm dia
1
6664
6664
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
1546
1546
Providing, installation, testing and commissioning of Pressure Guages
2
5000
2500
Supplying,Installation,Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires
1
7863
7863.36
Supplying,Installation,Testing and Commissioning of MAP 90 ABC Type Fire Extinguisher 4.0 Kg. Capacity ISI Mark(IS:15683)suitable for Class A/B/C Type Fires .
1
2667
2667.93
Supplying, installation, testing & commissioning of main
control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push
button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set.Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set.
Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set.
Battery charger trickle cum boost to take complete load of
fire alarm & PA system complete with all accessories
including providing & fixing of 2 nos. 12 volt,30 AH each
sealed maintenance free batteries -1 set.
1
48718
48718
Supplying, installation, testing & commissioning of heat
detector operating at 54ºC/57ºC with rate of rise cum fixed
temperature (dual thermistor) type with mounting base
complete with all connection etc. as required.
14
14994
1071
Supplying, installation, testing & commissioning fire alarm
sounder with facility to make announcement, mounted in M.S.
box (16 SWG) with hinged cover plate & suitable for operation
with amplifier i/c line matching transformer etc. complete as
required.
2
1114
557
Supplying, installation, testing & commissioning of manual call
boxes of MS construction in surface/recess with stainless steel
chain & hammer assembly complete with glass and push button
etc. as required.
2
948
474
Supplying and drawing following sizes of FRLS PVC insulated
copper conductor, single core cable in the existing surface/
recessed steel/ PVC conduit as required
-
-
-
2 x 1.5 sq. mm
160
11200
70
Supplying, installation, testing & commissioning talk back slave
station in surface/recess suitable for operation on simplex
mode complete with P.T.T. knob & speaker/microphone
enclosed in a M.S.(16 SWG)/ ABS box with break glass in front
etc. complete as required.
1
905
905
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements