Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date1 Jul 2024
Closing Date22 Jul 2024
Tender Amount₹ 4,91,22,000
Costs
EMD
₹ 9,82,440Document Cost
₹ 6,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_251691_1Bid Award Id
ViewTender No
e-NIT No.SESJ/04 of 2024-25 dated 29-06-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. take 70% of Item No. 2
158.2
34550
218.4
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
294.84
81552
276.6
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
169.47
1283150
7571.55
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
150.24
218696
1455.65
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
497.67
471417
947.25
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
497.67
79453
159.65
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
497.67
62980
126.55
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
208.07
1082567
5202.9
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) incl levelling course under granite,vitrified tile,roof tile.
45.46
299638
6591.25
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
138
79046
572.8
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
122
950184
7788.4
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
555.94
5460359
9821.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.)
75297
9276590
123.2
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
126.15
36123
286.35
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
232.62
146306
628.95
Suspended floors, roofs, landings, balconies and access platform (cross sectional area = 1 has been taken)
248.79
178680
718.2
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
2195.06
1267756
577.55
Edges of slabs and breaks in floors and walls Under 20 cm wid
159
41689
262.2
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm) 18mm thick
7.2
33521
4655.7
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
9
7006
778.5
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
1765.76
3340376
1891.75
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete
236.31
516644
2186.3
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
12
2691
224.25
Extra for pre finished nosing in treads of steps of kota stone/ sand stone slab.
100
16175
161.75
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufactures) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of tile 60x60 cm
59.62
83175
1395.1
Providing and fixing Ist quality Ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
244.17
300109
1229.1
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
715.28
172561
241.25
12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand)
3066.16
870176
283.8
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
3095.24
1014774
327.85
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
6876.68
1245022
181.05
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter
7205.88
462257
64.15
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats
3781.44
436378
115.4
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
3095.24
830917
268.45
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1220
160857
131.85
Providing & laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen & the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. Per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
81.25
61546
757.5
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including
necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners Powder coated aluminum (minimum thickness of powder coated 50 microns)
900.77
463266
514.3
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns)
1168
709443
607.4
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm
230.77
277339
1201.8
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 12.0 mm thickness toughened glass
63.36
149529
2360
Providing and fixing 5mm thick ACP sheet in aluminium doors with EPDM rubber/neoprene gasket complete as per the architectural drawings and directions of engineer in-charge.
65
97500
1500
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer in- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness
8
19256
2407.05
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
798.85
77608
97.15
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
47
76516
1628
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete.
38
28389
747.1
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm
18
5377
298.75
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
119
14773
124.15
9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
82
8917
108.75
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm
88
5984
68
Twin Rubber Stopper
70
4441
63.45
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm
94
5640
60
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
22800
3578460
156.95
Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer
3473.18
496317
142.9
Providing and fixing bolts including nuts and washers complete
1126.4
155668
138.2
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks)
143.75
204254
1420.9
Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on Perimetre wall angle pre-coated steel size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be pre painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.
82
144894
1767
Providing and fixing glass wool based acoustic ceiling tiles in size 600 x 600 x 15mm of square Edge WHITE, having noise reduction |co-efficient (NRC) of 0.90 Measurement of sound absorption coefficient in a reverberation room according to EN ISO 354 method testing, light reflectance 3-4% and humidity resistance of 95%. The weight of the system with the tile should be app 3.0 kg/m2 and the tiles should have class A absorption according to EN ISO 354. Fire classifications for the tiles should be accoroi6 |to class V standards and totally recyclable.The grid shall be fixed @ 600 mm centre to centre both ways. The colour of 24mm 1B system and acoustic tile shall be white. Main runner of grid shall be fixed @ 1200 mm centre to centre in longer direction with cross Tee of length 1200 mm @ 600 mm centre to centre using G.l. slotted cleats of size 25x35x1.6 mm fixed to. ceiling with 12 mm dia and 50 mm long dash fasteners, 4 mm G.. adjustable rods with galvanised steel level clips of size 85 x 30 x0.8 mm, spaced at 1200 mm centre to size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre.Cross Tee will be further connected with another |cross T of length 600 mm. The perimeter runner shall be fixed on wall with connect angle trim fixed at 300 mm centre to centre on
924.85
2099409
2270
|Providing and fixing Wood based panels with lineal perforations to be fixed on walls.The panels shall be with melamine laminate finish of size 2430rnm x 128mm x17mm with 2mm slats at 32 mm pitch, Toungue and Groove edges for seamless mounting having density of 800kg/m3. The back of the panels are perforated with 10mm diamete circular holes with a nonwoven fabric covering of 0.2mmr for providing Sound absorption via the acoustic impedance method.Panel is to be fixed on GI framework as recomimended by the manufacturer with screw fixed horizontal / vertical to wall at every 600mm c/c in tongue & groove system on GI lframework. The cavity of framework should be inserted with 50mm thick, 1000GSM thermally bonded polyester adding sunnorted from back with chicken wire mesh. Approved Make : ABSOUND OVERSEAS, Anutone or equivalent.(L.M.R)
498.53
2866547
5750
Providing and fixing of double skin insulated roofing system comprising of 100 mm thick & 64 Kg/Cum density Rock wool insulation slab duly Wrapped with Polythene sheets Sandwitched in between (external Lloyd Standing Seam profile &)internal Loydeck sheet manufactured out of 0.55mm TCT (Total Coated Thickness) permanently colour coated Galvalume steel (150 gsm. zincJaluminium alioy coating total of both sides as per AS 1397: 1993) having 300 Mpa yield strength of the external profile sheet and 350 Mpa yield strength for the inner sheet. The colour coating shall comprise of Silicon Modified Polyester.The colour coating shall comprise of 20 microns finish coat over a 5 micron primer coat on the exposed side and a back coat of 5 microns over a primer coat of 5 micron on the reverse side. The outer sheet shall be standing seam profiled having max. crest height of 63mm at min.418mm pitch distance fixed over a unique concealed clip made from 1.5mm Gl, one portion of the clip (lower) is fixed to the Z girt provided over the sheet & on the face of purlins and upper part gets of "Z" girth attached to the xternal sheet with zipping machine The inner sheet shall have a profle of minimum 28-30mm high crests at 195-200mm pitch distance and shall have minimum perforation of 18%, will be fixed on the structure by means of suitable size self drilling fasteners conforms to AS:3566 |Class-3 at valley. "Z" shape subgirts of size 50mm x 100mm x 50mm manufactured of 16G GI (1.6mm thick), would be fixed on to he prefabricated panels shall be fixed directly to the girth using self drilling fasteners. The metal sheet shall conform to IS:513.AS-1397 & 2728. the polyurethane insulation shall conform to IS:12436.The rate of the item is inclusive of all materials, erection accessories, incidental charges, cost of dash fasteners etc. cost of making provision of doors, windows, ventilators. No deduction shall be made for opening upto 0.20 sqm and no extra payment shall be made for wastages incl all leads, Lifts Complete Job.
1089
3850704
3536
Providing and fixing 300 - 600mm wide apron flashing and making the entire system water proof as per manufacturer's specifications and direction of EIC cpmplete in all respect. (LMR)
498
387942
779
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
7
53995
7713.7
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge
7
48508
6929.85
Orissa pattern W.C. pan of size 580x440 mm
2
4690
2345.35
Providing and fixing P.V.C low level flushing cistern with manually Controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
2
2327
1163.85
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. 18mm Granite Stone of approved shade
6
22190
3698.4
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length ,15 mm nominal bore
20
2376
118.8
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
9
43570
4841.2
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
2
3190
1595.1
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm
3
6145
2048.35
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
17
14784
869.65
Providing and fixing 15 mm nominal bore chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.
1
8054
8054.6
Providing and Fixing of SS COAT Hook complete, including cutting and making good the walls where required. (L.M.R)
9
3195
355
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m/1.2m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer- Incharge. (LMR)
8
6480
810
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
2
1409
704.8
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
38
22129
582.35
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 225mm
1
5939
5939.45
Providing and fixing wall Mounted C.P brass sink cock with swinging type casted spout with wall flange complete to the satisfaction of Engineer in charge.(LMR)
1
2467
2467
Providing & Fixing of Grab bar 600 mm of non slipping grip as per standard specification of use in disabled toilet complete with brackets suitable for wall installation as per approved sample complete in all respect.(LMR)
2
7716
3858
Providing and fixing 3 mm thick 100 mm nominal dia Stainless steel grating with frame for floor traps or drains of required pattern of approved quality including cutting and making good the floors etc complete as per direction of engineers charges.
13
3913
301
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
15mm nominal outer dia pipes.
40
10044
251.1
20mm nominal outer dia pipes.
65
20845
320.7
25mm nominal outer dia pipes.
30
12073
402.45
32mm nominal outer dia pipes.
40
19708
492.7
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall
-
-
-
15mm dia. nominal bore
10
3298
329.8
20mm dia. nominal bore
15
6006
400.45
25mm dia. nominal bore
15
7484
498.95
32mm dia. nominal bore
15
9057
603.85
40 mm dia. nominal bore
25
17673
706.95
50 mm dia. nominal bore
8
6995
874.4
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore
8
3477
434.65
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
25 mm nominal bore
10
6917
691.7
20 mm nominal bore
7
3593
513.4
32 mm nominal bore
3
2250
750
40 mm nominal bore
3
2502
834
50 mm nominal bore
3
2958
986.15
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5000
43750
8.75
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls 40mm nominal bore, 206mm long, weighing not less than 690 gms
1
1385
1385.55
Providing and fixing soil, waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100 mm dia
150
157305
1048.7
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/Cast Iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), including cost of cutting holes and making good the walls etc For 100 mm dia. pipe
6
1812
302.15
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100mm dia
4
2268
567
Providing and fixing plain bend of required degree Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100 mm dia
58
20471
352.95
Providing and fixing single equal plain junction of required degree Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100x100x100 mm
21
12188
580.4
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 65 mm offsets ,With 100 mm dia pipe
4
2071
517.75
Providing and fixing terminal guard Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100 mm.
2
812
406.45
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe SS 304 grade coupling with EPDM rubber gasket 100 mm dia
139
57427
413.15
Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement :4 coarse sand 100 mm dia
25
13802
552.1
Painting sand cast iron/centrifugally cast (spun) iron soil waste, vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe
150
10485
69.9
Repainting sand cast iron/centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc: 100 mm diameter pipe.
58
1977
34.1
Providing and fixing cast brass Floor Clean Out plug 100mm with suitable insert keys for opening, male threaded joint with G.I. socket lead caulked to soil pipe / waste pipe of C.I. and C.I.(LA) pipe as required complete as per instruction of the Engineer in charge. 100 mm dia
4
7572
1893
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:
-
-
-
32mm dia.
10
6038
603.85
40 mm dia.
16
11311
706.95
50 mm dia.
10
8744
874.4
Painting G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality
-
-
-
32mm dia. nominal bore
10
187
18.75
40 mm dia. nominal bore
16
340
21.3
50 mm dia. nominal bore
10
255
25.55
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100 mm inlet and 100 mm outlet
9
6909
767.7
Providing and fixing 100mm dia G.I. inlet fitting consisting of 100mm dia (Lenght upto 450mm) main G.I pipe with multiple G.I. sockets (Inlets) of required diameter welded to it (as per site requirement) and fixing the same to C.I trap and setting in cement concrete, complete as per instructions of the Engineer in charge.(LMR)
9
13707
1523
Providing and fixing G.I reducer/hopper/elbow (Floor Drain) of 100 x 50mm, complete as per instructions of the Engineer in charge.(grating and G.I pipe to be paid separately) (LMR)
6
4392
732
Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia with 25mm waste hole
17
804
47.35
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
150
54945
366.3
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
-
-
-
Single push fit coupler 110 mm diametre
10
1188
118.8
Single tee with door 110x110x110 mm
30
8697
289.9
Bend 87.5° 110 mm diametre
30
5491
183.05
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
28
1925
68.75
Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm diametre
90
29565
328.5
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
28
7361
262.9
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, for a lead upto 25 meter beyond 1 m from cutting edge All kinds of soil :
330
190228
576.45
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
60
15411
256.85
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete
-
-
-
250 mm dia. R.C.C. pipe
256
191027
746.2
300 mm dia. R.C.C. pipe
56
46902
837.55
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design Upto haunches of S.W. Pipe
-
-
-
250 mm dia. R.C.C. pipe
256
192755
752.95
300 mm dia. R.C.C. pipe
56
48650
868.75
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 200 mm diameter
18
15496
860.9
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design ,All around S.W. pipe 250 mm diameter S.W. pipe
18
21197
1177.65
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
7549
2516.45
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) ,With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
34600
11533.5
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
60
29016
483.6
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
27
153349
5679.6
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete
-
-
-
For pipes 100 to 250 mm diameter
1
658
658.2
For pipes 250 to 300 mm diameter
1
751
751.8
12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 3 ( 1 cement : 3 fine sand)
92
34109
370.75
2 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design
5
2418
483.6
Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 560mm internal diameter
2
4277
2138.7
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
1
23815
23815.8
Carriage of Bricks by MT 5 km
109176
58409
0.54
Carriage of sand by MT20 KM
615.77
252428
409.94
Carriage of stone agg. By Mt 20KM
826.08
338643
409.94
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements