Public Works Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 Feb 2025
Closing Soon27 Feb 2025
Tender Amount₹ 4,60,47,000
Costs
EMD
₹ 9,20,940Document Cost
₹ 5,500Tender Fee
Refer Documents
Summary
Construction Of Hostel At Govt. Polytechnic College At Watapora Bandipora
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDJK_272669_1Tender No
Fresh e-NIT No.86 of 2024-25 Dated 17-02-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Construction of Hostel at Govt. Polytechnic College at Watapora Bandipora
Construction of Hostel at Govt. Polytechnic College at Watapora Bandipora
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (back filling)
442.57
218
96657.29
... More
Supplying and filling in plinth under floors including watering, ramming, consolidating and dressing complete.
368.16
1000
368160
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. i. All works upto plinth level
434.65
8021
3486371.12
... More
ii. All works above plinth level upto floor V level
438.65
9412
4128595.73
... More
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
25
941
23525
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
99.48
5733
570378.53
... More
Centering and shuttering including strutting, propping etc. and removal of form including loading, unloading complete for: i. Foundations, footings, bases of columns etc. for mass concrete.
423.86
286
121372.31
... More
ii. Suspended floors, roofs, landings, balconies and access platforms.
1461.67
718
1049771.39
... More
iii. Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1565.47
577
904137.2
... More
iv. Columns, pillars, piers, abutments, posts and struts.
838.22
742
622420.26
... More
v. Stairs (excluding landings) except spiral staircases.
99.54
851
84723.47
... More
vi. Edges of slabs and breaks in floors and walls Under 20 cm wide
349.06
262
91523.53
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.
94338.1
123
11622453.92
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including all cost and carriages involved complete.
388.06
9027
3503095.23
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation
7.5 in foundations and plinth including curing in Extra for half Brick masonry in superstructure above plinth level upto floor V level including all cost and carriages involved complete.
243.74
1106
269795.81
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length first class imported wood
13.92
55000
765600
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
468
207
97039.8
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35 mm thick)
196.28
3234
634808.78
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass pnaes including ISI marked butt hinges bright finished of required size with necessary screws. First class imported wood 35 mm thick
84.53
3000
253590
... More
Providing and fixing 35 mm thick wire guaze shutter using galvanized M.S. wire guaze of average width for aperture 1.4 m in both directions of wire 0.63 mm for door, windows and clerestory windows with ISI marked M.S pressed but hinges bright finish of required size necessary screws as per directions of EIC. First class imported wood.
84.53
3200
270496
... More
Providng and fixing of 3.5 mm including cost and fixing wooden fillets/ beeding of required size and shape with nail including all carriages complete.
156.9
850
133365
... More
Providing and fixing of aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete: 250 x 16 mm
178
229
40922.2
... More
Providing and fixing of aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete: i. 200 x 10 mm
356
95
33944.6
... More
ii. 100 x 10 mm
576
63
36489.6
... More
Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc complete. i. 150 mm
356
80
28480
... More
ii. 100 mm
288
60
17280
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : single rubber stopper.
178
55
9861.2
... More
Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive and other allied fixing material to fix it properly on base complete job.
64.41
1285
82789.39
... More
Providing and laying vitrified floor tiles (Anti Skid) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300x300 mm including all cost and carriages involved complete.
184.01
1800
331218
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours including all cost and carriages involved complete.
220.82
478
105563
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate including all cost and carriages involved complete.
1273.34
590
751588.94
... More
Providing and laying Vitrified tiles in floor (anti skid) with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20 mm thick cement and matching pigments etc, complete Size of tile 600 mm x 600 mm including all cost and carriages involved complete.
124.81
2100
262101
... More
Tile work in skirting, risers of step and dedo upto 2 metre height, over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. 8 mm thick including all cost and carriages involved complete.
24.96
1359
33934.12
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all cost and carriages involved complete.
628.18
1229
772096.04
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (16 mm thick) including all cost and carriages involved complete.
159.02
4550
723596.66
... More
Providing edge moulding to 18 mm thick marble/granit stone counters, Vanities etc.
including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite Work) Double moulding including all carriages and cost involved complete.
225
381
85882.5
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
330
753
248737.5
... More
Providing and applying of 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) including all cost and carriage of materials involved complete job.
5116.78
283
1452142.16
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (2 mm thick) including all carriages and cost involved complete.
4488.6
181
812661.03
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter including all carriages and cost involved complete.
4488.6
63
286372.68
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (two coats) including all carriages and cost involved complete.
4488.6
115
517984.44
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10 sqm) over and including base coat of exterior primer applied @ 2.20 kg/10 sqm including all carriages and cost involved complete.
102.73
268
27577.87
... More
Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages and cost involved including all carriages complete.
561.62
64
36280.65
... More
Painting with synthetic enamel paint of approved brand and manufacture of requirewd color to give an even shade including all carriages and cost involved complete.
561.62
129
72477.06
... More
Structural steel work (welded) in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including all carriages complete.
18122.12
138
2504476.98
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
362.44
96
34794.24
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts, leads and carriages complete job.
483.26
704
340287.53
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) including all carriages complete.
91.46
506
46292.48
... More
Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.25 mm thick with zinc coating not less than 350 gram/m2 including all carriages complete.
60.98
1222
74517.56
... More
Providing and fixing plained eaves boarding. 2nd class Deodar wood 300x40 mm (nominal size) including all carriages and cost involved complete.
139.22
1450
201980.38
... More
Providing and fixing of soffits made out of 12 mm thick imported panelling wood including underneath frame work incl. 2" x 2" jamb pieces including all carriages complete.
106.1
1800
190980
... More
Sanitary/Plumbing
Providing and fixing Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
18
13945
251010
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
22
4841
106506.4
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete,
including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 literwhite P.V.C automatic flushing cistern.
3
5342
16027.05
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 32 mm dia
22
869
19132.3
... More
Providing and fixing braided hoses with two 15mm CP brass nuts & rubber washers without nipple (suitable for Geysers and basins) of approved make: 45 cm length with 15 mm nominal bore
47
667
31389.42
... More
Providing and fixing toilet paper holder C.P. brass Vitreous china
18
1011
18211.5
... More
Providing , fixing , testing and commissioning of CP brass twin coat hook with concealed screws.
18
740
13321.26
... More
Providing and fixing health faucet 15 mm dia with CP flush pipe, CP nozel hook complete including CP flange etc.
18
633
11407.86
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.
18
248
4472.1
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
89
582
51829.15
... More
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
42
230
9660
... More
Providing and fixing horizontal/vertical Hot water Geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, ventg an d all safety accessories etc complete including cutting and making good the walls, wherever required.(Jaguar Manufacture) i. 30 liter for kitchen (for small toilet and pantry)
1
13638
13638.94
... More
ii. 60 liter for shower ( Jaguar Manufacture)
13
20080
261047.93
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
22
1595
35092.2
... More
Providing and fixing CP brass/SS stop cock (concealed) of approved quality 15 mm nominal bore (for drinking area)
4
334
1338.8
... More
Providing and fixing Divertors of approved make (to the approval of Enginer-In-Charge) for bath and shower system complete in all respect. Single lever concealed divertor of bath and shower system (shower head, concealed body & wall mixer) Jaguar Prime.
20
7500
150000
... More
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I brackets and stainless stell plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Flow rate-6 LPM or less, Kitchen sink with drain board. 510 x 1040 mm bowl depth 200 mm
2
5584
11168.2
... More
Providing and fixing Central hole chrome Plateed brass Sink Mixer with Swinging casted spout & connecting legs andflanges, including cutting and making good the walls wherever required.
2
3023
6046
... More
Providing and fixing UV stabilised UPVC pipes, Type B as per IS:13592 for soil, waste, rain water and vent, including all fittings with or without access i.e clean out plug, bends, junctions, cowls, offsets, couplers, connections, heavy duty metal pipe clamps with rubber seal/clips/holders etc and jointing with heavy duty solvent cement, complete as per manufacturer's specifications and making good the same complete as directed by the Engineer-In-Charge (vertical pipes can be jointed through Rubber rings) including cement concrete 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate, 20 mm down guage) 75 mm in bed and all around soil and waste pipes under floor, including shuttering and centering for:- i. 75 mm outer dia
45
549
24705
... More
ii. 110 mm outer dia
120
698
83760
... More
Providing and fixing thermal insulation over pipes/fitting/Trap etc as required in exposed/chase with 32 mm thick approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 kg/m3 over pipes of following sizes including all required accessories complete as per manufacturer's specifications and finishing it with 6mm thick rough plaster of 1:3 mix (1 Portland cement : 3 hard settling cement compound) (Make-K- Flex, Eurobatex, Vidoflex) i. 75 mm outer dia
35
1250
43750
... More
ii. 110 mm outer dia
120
1650
198000
... More
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100 mm dia.
60
308
18507
... More
Providing and fixing multi inlet uPVC floor trap with minimum 50mm water seal of self cleaning design with 110 mm outlet consisting of all necessary fittings and providing strainer of 150 x 150 mm square stainless steel 2 mm thick frame with slotted lockable grating on top of the trap level matching the level of floor finish etc, complete including cost of cutting and making good the walls and floors wherever required and as directed by Engineer In Charge. (The inlet diameter shall be 32 mm, 40 mm or 50 mm as per site requirements)
25
743
18575
... More
Providing and fixing uPVC pipe as per IS 4985, class-3, 6Kg/cm2 with cement solvent joint, complete with all fittings and clamps etc including cutting and making good the walls and floors for waste pipes from wash basins, urinals, sinks & balcony drainage, as directed by the Engineer-in-charge i. 32 mm OD
10
149
1490
... More
ii. 40 mm OD
40
205
8200
... More
ii. 50 mm OD
30
293
8790
... More
Providng and fixing SS grating with frame including fixing to the floor with cement mortar.
100 mm dia
41
180
7380
... More
Providing and fixing 110mmx50mm outlet. uPVC floor drain consisting of all necessary fittings and providing strainer of 1501x 150mm square stainless stell 2 mm thick frame slotted lockable grating on top of the trap level matching the level of floor finish etc all complete as per specifications and direction of Engineer-In-Charge.
16
720
11520
... More
Providing and fixing of cast brass clean out plug (floor/ceiling) with suitable insert keys for opening in: brass cap, male threaded joint with threaded G.I socket fixed to HCI soil pipe or C.I. (LA) pipe joints as required complete in all respects. 110mm outer dia
20
152
3040
... More
PP-R should be a complete installation system consisting of pipes and fittings of a thermoplastic polopropylene PP-R 3-layer glass fibre compound (type 3/type 4) of PN20 (SDR 6)/PN16 (SDR 7.4) and PP-RCT (SDR9 and SDR11) within a range of diameters 20-200 mm in Green/Grey colour of pipe dimensions series in accordance with EN ISO 4065 having linear expansion of 0.05 mm/mK with DVGW and QB/CSTB certification as per EN ISO 15874-2:2013-06E, EN ISO 15874-3:2013-06E standard. System elements are connected by muff-welding (thermal polyfusion) or electrofusions welding with the use of electric welders. The welding technology i.e. unifrom connections, guarantees an exceptional leak-tightness and mechanical strength of a system and use for internal and external water supply, cooling systems (hot and cold water), production process industrial systems and use in shafts, basements terrace with insulation, :Make : KAN-therm, Aquatherm, Poloplast. Concealed work including cutting chases and making good the wall. i. 16x2 mm outer dia pipe
55
311
17105
... More
ii. 20x2 mm pipe
65
350
22750
... More
iii. 25x2.5 mm outer dia pipe
35
380
13300
... More
iv. 32x3 mm outer dia pipe
40
725
29000
... More
PP-R should be a complete installation system consisting of pipes and fittings of a thermoplastic polopropylene PP-R 3-layer glass fibre compound (type 3/type 4) of PN20 (SDR 6)/PN16 (SDR 7.4) and PP-RCT (SDR9 and SDR11) within a range of diameters 20-200 mm in Green/Grey colour of pipe dimension series in accordance with EN ISO 4065 having linear expansion of 0.05 mm/mK with DVGW and QB/CSTB certification as per EN ISO 15874-2:2013-06E, EN ISO 15874-3:2013-06E standard. System elements are connected by muff-welding (thermal polyfusion) or electrofusions welding with the use of electric welders. The welding technology i.e. unifrom connections, guarantees an exceptional leak-tightness and mechanical strength of a system and use for internal and external water supply, cooling systems (hot and cold water), production process industrial systems and use in shafts, basements terrace with insulation, :Make : KAN-therm, Aquatherm, Poloplast. Exposed on wall/terrace. i. 16x2 mm outer dia pipe
30
250
7500
... More
ii. 20x2 mm outer dia pipe
30
370
11100
... More
iii. 25x2.5 mm outer dia pipe
60
410
24600
... More
iv. 32x3 mm outer dia pipe
50
510
25500
... More
v. 40x3.5mm outer dia pipe
55
1050
57750
... More
vi. 50x4 mm outer dia pipe
25
1550
38750
... More
vii. 63x4.5 mm outer dia pipe
10
2050
20500
... More
viii. 80x4.5 mm dia pipe
10
2550
25500
... More
Providing and fixing thermal insulation over pipes in exposed/chase with 32 mm thick approved equivalent thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber having density of 60-90 kg/m3 over pipes of following sizes including all required accessories complete as per manufacturer's specifications and finishing it with 6 mm thick rough plaster of 1:3 mix (1 Portland cement : 3 hard settling cement compound) make K-Flex, Eurobatex, Vidoflex) i. 25 mm dia
70
510
35700
... More
ii. 32 mm dia
35
550
19250
... More
iii. 40 mm dia
40
610
24400
... More
iv. 50 mm dia
50
810
40500
... More
v. 63 mm dia
40
1150
46000
... More
vi. 80 mm dia
20
1350
27000
... More
Providing and fixing of ball valve (brass) of approved quality, high or low pressure, with plastic floats complete. i. 15 mm nominal bore
3
453
1360.5
... More
ii. 20 mm nominal bore
3
524
1574.55
... More
iii. 25 mm nominal bore
10
569
5694.5
... More
iv. 32 mm nominal bore
6
610
3660
... More
v. 40 mm nominal bore
10
695
6950
... More
vi. 50 mm nominal bore
2
900
1800
... More
vii. 65 mm nominal bore
1
1250
1250
... More
viii. 80 mm nominal bore
1
1650
1650
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed by EIC. All kinds of soil
15
417
6260.25
... More
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type, withcommon burnt clay F.P.S (non-modular) bricks of class designation 7.5
6
2620
15723.6
... More
Providing, laying, jointing and commissioning of PVC pipe AS/IS: 15328 with pussfit joint with solvent including testing of joints etc complete as directed by Engineer-in-charge (including all round cement concrete) 15 mm dia pipe
10
450
4500
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
5
11533
57667.5
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm
space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per
specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
6
483
2901.6
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 250 to 300 mm diameter
1
751
751.8
... More
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:
Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
5
5679
28398
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a
coat of neat cement, rounding the edges and making and finishing the outlet complete.
5
262
1314.5
... More
Electrification
Wiring for First light point/ exhaust fan point/ call bell point (wiring from distribution board to first point via switch board) with 2x1.5 sq.mm FRLS PVC insulated copper conductor single core cable confirming to IS:694 in surface / recessed medium duty minimum 2mm thick FRLS existing PVC conduit as per IS:9537 Part-3 latest as on date, include the cost of SITC of modular type switch & modular plate with base, suitable minimum 0.8mm thick Gl box, circuit wiring 2X2.5 sq.mm (P,N) FRLS PVC insulated copper conductor single core cable from switch board to Distribution Board etc. as required. (All Switchs Should be Anti-Bacterial) with 1.5 sq mm earthwire of Havells, polycab or Anchor make.
413
1050
433650
... More
Wiring for Ceiling Fan point (wiring from distribution board to ceiling fan point via switch board) with 2x1.5 sq.mm FRLS PVC insulated copper conductor single core cable confirming to IS:694 in concealed in slab/ wall heavy duty minimum 2mm thick FRLS existing PVC conduit as per IS:9537 Part-3 latest as on date including fan box with laminated sheet, include the cost of SITC of modular type switch and 1module fan regulator & modular plate with base, suitable minimum 0.8mm thick Gl box etc. as required. (All Switchs Should be Anti-Bacterial) with 1.5 sq mm earthwire of Havells, polycab or Anchor make.
101
1100
111100
... More
Wiring for 240 volt single phase and neutral 6 amps switch socket outlet with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2 mm thick existing PVC conduit, including the cost of SITC of 6 amps 5 pin Modular type switch socket of approved make colour and design in 1.6 mm thick Gl box with grid plate and earthing of third pin of the socket outlet and the Gl box with 2.5 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire etc. as required. (Cost of Switch & Socket is included).(All Switchs & Sockets Should be Anti-Bacterial) with 2.5 sq mm earthwire of Havells, polycab or Anchor make.
5
1200
6000
... More
Wiring for 240 volts single phase and neutral 6 amps switched socket outlet with 2.5 sq mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wire concealed or surface mounted 25 mm dia 2 mm thick existing PVC conduit, including the cost of SITC of 2 nos. 6 amps switched & socket of approved make and design in 1.6 mm thick Gl boxes with grid plates and earthing the 5 pin of socket outlet with 2.5 Sq. mm PVC insulated copper conductor stranded flexible FRLS wire etc. as required. (Cost of Switch & Socket is included) (All Switchs & Sockets Should be Anti-Bacterial) with 2.5 sq mm earthwire of Havells, polycab or Anchor make.
143
1500
214500
... More
Wiring for 250 volts single phase and neutral 16A Power Plug point with 2x4.0 sq. mm FRLS PVC insulated copper conductor single core cable confirming to 18:694 in surface/ recessed medium duty minimum 2mm thick FRLS existinng PVC conduit as per IS 9537 Part-3 latest as on date, including the cost of SITC of modular type 16A switch with indicator of 'ON', 5 pin Shuttered type 6/16A Socket & modular plate with base and minimum 0.8mm thick Gl box and earthing the point wired with 1x4.0 sq.mm FRLS PVC insulated class 2 copper conductor single core cable confirming to IS:694 etc. as required. (Cost of Switch & Socket is included).(All Switchs & Sockets should be Anti-Bacterial) Havells, polycab or Anchor make.
88
1750
154000
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS
PVC insulated copper conductor, single core cable in surface/ recessed medium class
PVC conduit as required. i. 2X6 sq. mm +1 X 6 sq. mm earth wire(in minimum 25mm)
55
439
24145
... More
ii. 4X6 sq. mm+2 X 6 sq. mm earth wire(in minimum 32mm)
75
754
56550
... More
iii. 4X 10 sq. mm+2X6 sq. mm earth wire(in minimum 40mm)
193
1005
193965
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i. 20 mm
250
128
32000
... More
ii. 25 mm
750
145
108750
... More
iii. 32 mm
100
184
18400
... More
iv. 40 mm
75
228
17100
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
40
800
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
2
148
296
... More
Supplying and fixing following size/ modules, Gl box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mm X 75mm)
2
298
596
... More
Supplying & fixing suitable size GI Box was modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc as required. Legrand, L&T , Havells, Schneider make.
5
727
3635
... More
Supplying and fading call bell/ buzzer suitable for single phase 230 V, complete as required
2
99
198
... More
Distriibution Boards:
Supplying and faing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,
neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing jets en required. But without MCB/RCCB/solator) Legrand, L&T , Havells, Schneider make. i. 8 way, Double door
2
2573
5146
... More
ii. 12 way Double door
1
2315
2315
... More
Supplying and fixing fallowing way, horizontal type three pole and neutral, sheet steel MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required (But without MCBRCCB/ Isolator). Legrand, L&T , Havells, Schneider make. i. 6 way (4+18), Double door
8
4974
39792
... More
ii. 8 Way (4+24), Double door
8
5967
47736
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V TPN MCB distribution board of sheet steel, dust protected, duly powder painted inclusive of 160 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCCBs and incomer) as required (Note Vertical type MCCB TPDB is normally used where 3 phase outlets are required) 8 way (4+24), Double door. Legrand, L&T , Havells, Schneider make.
2
10165
20330
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V. 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and come as required. (Legrand, L&T , Havells, Schneider make). i. Single Pole
221
256
56576
... More
ii. Triple Pole
16
1007
16112
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
51
13
663
... More
Supplying and fixing following rating, double pole, 240 V, MCB(10kA) in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make). i. 25A
2
656
1312
... More
Supplying and fixing following rating, four pole, 415 V, MCB(10KA) in the existing MCB
DB complete with connections, testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make). i. 40A
8
1650
13200
... More
ii. 63A
8
1750
14000
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make). i. 25A
3
2028
6084
... More
ii. 40A
23
2642
60766
... More
iii. 63A
23
2722
62606
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. For 8 way, Double door SPN MCBDB (Legrand, L&T , Havells, Schneider make).
2
832
1664
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make). i. For 6 way, Double door TPN MCBDB
8
1124
8992
... More
ii. For 8 way, Double door TPN MCBDB
8
1340
10720
... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make).
2
1170
2340
... More
Supplying and fixing 20 A 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make).
3
1621
4863
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A, "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (Legrand, L&T , Havells, Schneider make).
3
2590
7770
... More
Earthing System:
Supply, installation, testing and commissioning of Copper Bonded Rod earthing (Dia- 17.2 mm, Length-3000mm,) 250 micron Copper coating with clamp and 50 kg BFCEric/JAM Fill) tested for 25kA peak fault current complete in all respects. (The installation procedures should be followed as instructed by the Earth Electrode supplier). The Earth pit should be covered with heavy duty Polyplastic weather proof chamber. (The resistance value shall be guaranteed for less then 1ohm for minimum 3 years without any maintenance) Make-Make-Remedies/JMV/Hi-Tech.The product should meet the requirements as per IEC or any equivalent international specification (UL). Chemicals used shall be environmental friendly.
10
8500
85000
... More
Providing and fixing 25 mm X 5mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required.
2
1551
3102
... More
Providing and fixing 25 mm X 5 mm G.L. strip in 40 mm dia G.L. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
2
706
1412
... More
Providing and fixing 25 mm X 5mm copper strip on surface or in recess for connections etc. as required.
2
1162
2324
... More
Providing and fixing 25 mm X5 mm G.L. strip on surface or in recess for connections etc as required.
2
244
488
... More
Providing and fixing 32 mm X 6 mm G.. strip on surface or in recess for connections etc as required.
8
165
1320
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
10
70
700
... More
Providing and fixing 32 mm X 6 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
150
295
44250
... More
Supply of Light Fixtures and Fans:
Supply of indoor type surface mounted downlighter while CRCA powder coated LED light fixture with total system wattage 10-12W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 Im/W and minimum system lumens 1000. Similar to Bajaj or equivalent as per approved list of make. (Havells, philips, Wipro, Jaquar make)
59
1200
70800
... More
Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 14-16W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 Im/W and minimum system lumens 1500. Similar to 15W WH RD or equivalent as per approved list of make. (Havells, philips, Wipro, Jaquar make)
22
1460
32120
... More
Supply of indoor type surface mounted downlighter white CRCA powder coated LED light fixture with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy =100 Im/W and minimum system lumens 1500 Similar to or equivalent as per approved list of make. (Havells, philips, Wipro, Jaquar make)
37
1600
59200
... More
Supply of indoor type surface mounted downlighter while CRCA powder coated LED light fixture with total system wattage 15W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required LED shall be SMD type, fixture should have minimum efficacy =100 Im/W and minimum system lumens 1500 Similar to or equivalent as per approved list of make (Havells, philips, Wipro, Jaquar make)
22
1650
36300
... More
SURFACE MOUNTED BATTEN:
Supply, installation, testing, commissioning and numbering of indoor type 10W surface/wall mounted LED batten fitting (Minor Light) covered by diffuser, high efficiency reflector, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required LED shall be SMD type (similar to BCLSB 10W LED Mirror light or equivalent) (Havells, philips, Wipro, Jaquar make)
24
700
16800
... More
Supply of indoor type surface mounted Linear LED fitting White CRCA powder coated with total system wattage 18-20W covered by PMMA acrylic diffuser, die cast aluminium housing, high efficiency reflecctor, prewired electronic driver complete with all accessories suitable for operation on single phase 240V 50Hz AC supply as required. LED shall be SMD type, fixture should have minimum efficacy 100 Im/W and minimum system lumens 2000. Similar to LED LUMINAIRE or equivalent as per approved list of make. (Havells, philips, Wipro, Jaquar make)
158
1000
158000
... More
Supply of 3W LED Unidirectional Exit Signage Light with inbuilt 2 hours battery back-up Standard make.
6
4769
28614
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Havells, Polycab, orient, usha make)
101
2688
271488
... More
Supply of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. (Havells, Polycab, orient, usha make)
8
4042
32336
... More
Supply of 450mm dia sweep wall fan Hi speed with 3 speed push buttons, 1440 RPM, with guard and mounting arrangement. (Havells, Polycab, orient, usha make)
2
5842
11684
... More
Installations of Light Fixtures and Fans:
Installation, testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC Insulated, copper conductor, single core cable and earthing etc. as required.
304
119
36176
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
8
203
1624
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
2
363
726
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
284
48
13632
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
8
33
264
... More
L.T./Control Cables:
Supply & Laying of following sizes of Power Cables Aluminium conductor, XLPE Insulated, cores laid up PVC tape / Extruded Inner sheath, Armour, FRLS at outer sheath, 1100V grade as per IS 7098(Part 1) 1988 with upto date amendments laying in the existing RCC/ HUME/ METAL pipe/Cable tray as required.(Cable tray & RCC Hume pipe & Metal Pipe Should be seperatly Paid as per tender Items) Havells, Polycab make. A) 4 cores i. 4 x 10 sq.mm. (For Lift,Pumps Supply)
50
245
12250
... More
ii. 4 x 16 sq.mm. (For Lift Pumps Supply)
85
365
31025
... More
B) 3.5 CORES 3.5 x 50 sq.mm. (For LIGHT & POWER VTPN DB'S Supply)
90
577
51930
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required i. 4 x 10 sq.mm.(25mm)
4
269
1076
... More
ii. 4 x 16 sq.mm. (28mm) (For Lift,Pumps Supply)
8
309
2472
... More
iii. 3½ X 50 sq. mm (35mm) (For LIGHT & POWER VTPN DB'S Supply)
6
413
2478
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. standard make i. 63 mm dia (OD-63 mm & ID-51 mm nominal)
10
247
2470
... More
ii. 200 mm dia (OD-200 mm & ID-175 mm nominal)
10
668
6680
... More
Fire Detection System
MANUAL CALL POINT
Supply, Installation, Testing and Commissioning of Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device UL & FM Approved. Approved Makes: Ansul-Tyco / Notifier/ Rux / JCI (IFC) / Nohmi / Gamewell / Honeywell
8
3850
30800
... More
MONITOR MODULES
Supply, Installation, Testing & Commissioning of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance UL & FM Approved. Approved Makes: Ansul-Tyco / Notifier/ Rux / JCI (IFC) / Nohmi / Gamewell / Honeywell
6
3700
22200
... More
CONTROL MODULES
Supply, Installation, Testing & Commissioning of Addressable Control Module for Sounders / Strobes/Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance UL & FM Approved. Approved Makes: Ansul-Tyco / Notifier/ Rux/JCI(IFC)/ Nohmi / Gamewell/ Honeywell
5
4050
20250
... More
Supply, Installation, Testing & Commissioning of Isolator Module for Isolating short / dewired/loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.
6
3550
21300
... More
Hooter cum strobe
Supply, Installation, Testing and Commissioning of Sounder cum Strobe rated at 80 dBA @3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication UL & FM Approved.
Approved Makes: Ansul-Tyco / Notifier/ Rux / JCI (IFC) / Nohmi / Gamewell Honeywell
8
3800
30400
... More
FIRE ALARM CONTROL PANEL
Supply, Installation. Testing and Commissioning of Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition & FM approved. 01 Loop
Approved Makes: Ansul-Tyco / Notifier/ Rux / JCI (IFC) / Nohmi / Gamewell/ Honeywell
1
175000
175000
... More
Supply, Installation, Testing and Commissioning of Addressable Fire Fighter's Telephone Jack with suitable supervised module for two way communication between Remote Fire Fighter & Fire Command Center. UL Listed. Approved Makes: Ansul-Tyco / Notifier/ Rux/JCI(IFC)/Nohmi/Gamewell/Honeywell
5
4500
22500
... More
Supply, Installation, Testing and Commissioning of Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center. Approved Makes: Ansul-Tyco / Notifier/ Rux/JCI(IFC)/Nohmi/Gamewell/ Honeywell
2
15000
30000
... More
Supplying and Laying of 2 C X 1.5 Sq mm multi stranded twisted shielded FRLS Copper cable. Approved makes: Polycab/ RR Kabel/ Paramount/ Parasheild
190
105
19950
... More
Fire Fighting System
Supply, testing, installation, testing & commitioning of electric driven fire (Terrace)
pump of capacity 450 LPM 35 mtr Head, TEFC motor at 2900 r.p.m. complete with
coupling, coupling guard, base plate, anti vibration pad, foundation etc.
1
140000
140000
... More
Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 6mm MS plate with dished ends from 8mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate terrace pump at drop of pressure, automatically at required pressure setting:
Recommended dia. :250mm
Height of shell : 1200mm
Test Pressure : 10 kg/cm2
Working pressure : 5.5 kg/cm2
1
30000
30000
... More
Supply, Installation, testing and commissioning of pressure switches for fire pump as per techinical specifications of annexure
3
3500
10500
... More
M.S "C" Class Pipes Supply, installation, testing & commissioning of Black steel pipe (IS 3589/IS:1239 Part-1) heavy C-class including cutting, threading, welding etc. bends, elbows reducers, clamps, hangers etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. MS rods, angles channels, slotted angle, etc., cutting to sizes, drilling welding fixing to insert plates, including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and red shade
including all steel work. i. 100 mm dia
35
1850
64750
... More
ii. 80 mm dia
10
1280
12800
... More
iii. 25 mm dia
10
560
5600
... More
Valves & Allied Items
Supplying, fixing, testing and commissioning of butterfly valve of CI, SS-304 DISC,
PN1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,
washers, gaskets conforming to IS 13095 of following sizes as required: i. 100 mm dia
5
5400
27000
... More
ii. 80 mm dia
3
4300
12900
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required. 100 mm dia
2
7000
14000
... More
Providing, Installation, Testing and Commissioning of Gun Metal Ball Valves with brass body chrome plated of following sizes as required. 25 mm dia
3
1100
3300
... More
Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel dial type Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0-16 Kg/cm2.
3
1800
5400
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100 mm dia
1
10000
10000
... More
Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
3
900
2700
... More
Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, stove enamelled fire red finish with 'FIRE HYDRANT written in front. Approximate size 2100x1200 mm.
3
12000
36000
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Stainless Steel cap and chain as required.
3
8500
25500
... More
Providing and fixing 63mm dia 15m long non percolated rubberized fabric lined hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects, hose shall conform to IS:636 type II and coupling to IS:903-1975 (ISI marked)
6
7000
42000
... More
Supplying & fixing Stainless Steel (Grade 304) 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required
3
2300
6900
... More
Supply, installation, testing & commissioning of First-Aid fire hose reels wall mounting swinging type, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. x 36m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia, orifice. The hose reel shall strictly confirm to IS:884-1985.
3
8000
24000
... More
Providing and fixing 2 way gunmetal fire brigade inlet breaching head as per IS:904 specification tested for 20Kg/sq-cm with 63mm dia instantaneous type inlet and 150/100mm dia flanged outlet with built in check valve for fire brigade connection to under ground tanks and fire risers including companion flanges, nuts, bolts & washers etc.
1
9000
9000
... More
Providing and fixing of HDPE triple layer (minimum) water tank on terrace of capacity 2000 Ltrs. The job further includes providing of concrete base (Minimum 01 feet high) of required size.
5
10000
50000
... More
Providing of interconnections between 10 No's of water tank at the bottom so that all the tanks acts as one reservior by way of fixing tank nipple, ball valves of 100mm dia and other accessories required to complete the job.
5
4000
20000
... More
SITC of AUTOMATIC FIRE FIGHTING PANEL
Fabricating, supply, installing, testing and commissioning of compartmentalised common control panel for Electrical motor driven pumps. INCOMING: 1 nos.of 125A TPN MCB. 1 Sets of 100 Amps. TPN Al. Bus bars with colour coded heat shrinkable PVC sleeves. 1 Set of RYB indicating lamps with individual HRC control fuses. 1 No. 96 x 96 mm 0-50 Amps. Digital Ammeter and suitable rated current transformers. 1 No. 0-600V 96 x 96 mm Digital Voltmeter.OUTGOING: 1 No. 40A TP MCCB, DOL starter with over load relay, single phase preventor and indicating lamps with ON/OFF push buttons. I No. Auto manual selector switch. The panel shall have all the requisite gadgets for AUTO operation in case of pressure drop sensing through pressure switches. All the components shall be housed in a common cubical made of 16 swg. M.S. sheet with required stiffeners. The panel shall be powder coated of approved colour both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height. Also panel shall have sufficient (min. 6 No's) NO/NC contacts for extending the status(annunciation) of fire pumps to the Fire alarm panel.
1
85000
85000
... More
Providing and fitting of electrical cables from power source to main auto control panel to
pumping units as per sizes given. i. 3.5Core x 35 Sq mm PVC insulated armoured Al cable Cable
50
580
29000
... More
ii. 4Core x 16 Sq mm PVC insulated Al cable Cable
10
350
3500
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required i. 100 mm Width x 50mm. Depth
40
160
6400
... More
ii. Automatic Air Release Valve 25mm dia including ball valves
3
3000
9000
... More
Structural Steel like angles, channels etc at various locations for supporting Tanks, Valves.
800
127
101600
... More
Supply and installation of Dry powder type ABC extinguishers bearing IS:15683 marking the wall including brackets etc of 6 kg capacity with a warranty period of 5 years. It have simple squeeze grip activation mechanism which allows to control the charge and optimise use of the extinguishing agent.and also should have combination of mono ammonium phosphate (MAP-90) and ammonium sulphate, ABC Dry Powder should not only cut off oxygen supply to the fire but also interferes with the chemical reaction necessary to sustain a fire and fights Class A, B, C and electrically started fires. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM Qty: 6 Kgs (I.S.I marked)
6
11500
69000
... More
Supply and installation of Carbon-di-oxide fire extinguishers consisting of Aluminium cylindrical body, (bearing IS: 15683 marking) squeeze lever discharge valve fitted with internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracker, confirming to IS 934 finished externally with red enamel paint & fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. The Carbon-di-oxide filled in the cylinder must be as per IS 15222. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM. Capacity 4.5 kg (LS I marked).
3
15000
45000
... More
Supply and installation of Fire extinguishers (Wet Chemical based) of capacity: 6 Ltr bearing to IS:15683 marking). It shall be used to successfully combat Class A. F and electrically started fires and should be highly effective: to prevent re-ignition. It should be stored under a pressure of 15 bars, with a test pressure for cylinder: 35 bars. It should comply with IS 15683 RATINGS - 3A. with an operating temperature upto 60 deg C.The squeeze lever discharge valve fitted with interal discharge tube, Long discharge nozzle, suspension bracket, finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete. The Fire Extinguisher shall be provided with NABL Test Report. Warranty of the product should be 5 years confirmed by OEM. Capacity of cylinder: 6 Ltr (I.S.I marked)
1
35000
35000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%